Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Don't know if the question belongs in this site, but I'll try anyway.

I had a GF 8600GT whose capacitors blew. Nevertheless, if the card was cold, the system managed to start with scrambled graphics, but I got an image anyway.

Now I bought a brand new 9800GT (taking the opportunity to make an upgrade) and installed it. Now I have no video. The old card also doesn't give video anymore. The differences between this time and the last test I ran and got video is the monitor (which is working, because I connected it to my laptop to test) and the VGA-DVI adapter, since neither card has a VGA connector. However, neither the adapter that came with the old nor the new card works, so I'm finding it unlikely that the adapter is the problem.

So, while I don't have the conditions to try the test with a direct DVI cable, I'd like some ideas on what to check meanwhile. My impression is that either it's something simple I'm missing or something very serious that blew up another part of my setup.

Some other random facts that might be important:

  • All the coolers start properly, including the video card's.
  • The power light of the motherboard is on and the PCI-E 'problem' LED lights up if I don't connect the card properly, so I'm thinking the motherboard isn't 'too dead' yet.
  • May connecting the old card with blown capacitors (this makes it heat up very fast) even for a few seconds have blown up something?

So, I'm willing to play "House's" part and try pretty much any idea that could lead to a solution/change of symptoms. Pretty much anything is accepted.

Thanks in advance!

share|improve this question
Can you try the video card on a natively capable DVI monitor? – Iain Jan 23 '10 at 16:46
I'm arranging that to be done already, just wanted some ideas to try in the meantime =D – Rafael Almeida Jan 23 '10 at 17:18
up vote 2 down vote accepted

I ended up disassembling the computer ENTIRELY to dust it off and buy me some time to consider the approach I'd take.

Then while I was reassembling I tried turning it on without any video card to see if the motherboard would beep (if it didn't, then something would be very wrong with it). It did beep, and I installed the card afterwards and it worked perfectly.

So, I had no chance to try resetting the CMOS, but quack's reasoning seems very right and should be tried by anyone experiencing a similar issue.

share|improve this answer

Have you tried clearing the CMOS on the motherboard? You'll need to check the motherboard manual for the jumper location (although it may be labelled well enough to find it just by looking).

Generally, you'd set the "Clear CMOS" jumper to its ON position, turn the system on, turn the system off, and return the jumper to its original (OFF) position.

You may have confused your motherboard switching graphics cards, so install the new graphics card, clear the CMOS, and see if that helps. I would not recommend reinstalling the old graphics card.

share|improve this answer

Does the motherboard have an onboard graphics chip?

If it does, that's the first thing to try. Remove the 9800GT completely (having a card in might disable the onboard graphics), plug the monitor into the motherboard's VGA output and see if you get a picture.

If you don't then it would point to the motherboard being dead.

If you do, then you can verify that the machine still works.

Make sure you've got the 9800GT drivers. Put the card back in and double check it's seated properly. If it still doesn't work can you check the card in another machine? If that doesn't work then the cards faulty. As it's new you should be able to take/send it back for a replacement. Actually if you bought it locally it might be worth taking it back anyway and asking them to double check it's OK.


You need to double check that the old 8600GT drivers will work with the 9800GT. If they're not compatible that might explain the lack of graphics. In that case you need to install a 8600GT then uninstall the display drivers & use the Windows VGA drivers. Then install the 9800GT which should work at VGA resolution. You can then install the 9800GT drivers.

If they are compatible then the problem lies elsewhere.

share|improve this answer
It doesn't have an onboard graphics chip. Is there a way to definetely confirm a dead motherboard? What do you mean 'make sure I have the drivers?' the installed drivers are the ones of the old card, but I believe they aren't loaded until windows starts? Also, I should see the POST message anyway. – Rafael Almeida Jan 23 '10 at 17:01
@Rafael - I've updated my answer – ChrisF Jan 23 '10 at 17:19
I might try that if nothing else works, but still it makes little sense to me. What I mean by no graphics is no graphics AT ALL. And you can't install a video driver for the BIOS Setup, for example. I can't see ANYTHING from the boot up, not just when windows comes in the way. – Rafael Almeida Jan 23 '10 at 17:23
@Rafael - OK - I missed that bit about the old graphics card not working at all, sorry. You need a known working card - either verify the new one in another machine or get another card, preferably one that's compatible with the 8600GT and try that. – ChrisF Jan 23 '10 at 18:00

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .