If I have “badblocks” write its output to a file, and that file is empty, does that mean that no bad blocks were found?
I recently ran badblocks on a large server hard drive to check for possible issues (SMART reported that everything was fine, but I needed to be sure). The command I used was: badblocks -c 1024 -b ...
I have a linux box which acts as a home NAS with 2 x 1 TB hdds in linux raid-1. Recently one of two drives failed, so I bought a new one (1TB WD Blue) and put it on. Rebuilding starts and stops at ...
I'm running badblocks in parallel on 2 identical hard drives. The problem is that /dev/sda has already finished without error the tests but /dev/sdb it at 363353920/488386583 (about 75%) but didn't ...