0
votes
3answers
14 views

Local DNS using Bind9

I have a few computers on my home network that I would like to assign names to. I don't want them to be a TLD, just aliases, like "orange" or something. The tutorials that I was reading such as this ...
-1
votes
1answer
19 views

Host 2 Seperate DNS servers on one server?

Just wondering if its possible to have 2 different DNS servers on a server? For instance i am running BIND DNS (Through cPanel), and wish to run a separate instance of PowerDNS as well. Is this ...
0
votes
1answer
30 views

How could I redirect in bind to another host in case server 1 went down?

I have two servers with same service, so server 1 xxx.myhost.com A record ip 1.1.1.1 server 2 xx2.myhost.com CNAME record to otherhost.com The server number 1 is the principal, so, I gave to my ...
0
votes
1answer
63 views

DNS server (BIND) stops forwarding. Restart helps. Why?

I'm encountering very strange issue with my DNS server, which is set up to forward requests for a specific domain to another DNS server. After restarting named I'm able to resolve hostnames, but after ...
0
votes
2answers
94 views

SSHD reverse mapping fails, but nslookup, dig, and host resolve correctly

I just set up a dhcp/dns server to manage my home network. After I got everything up and running (and maybe before - I wasn't paying close attention), I noticed that logging into ssh was slow. I ...
0
votes
0answers
56 views

DNS server won't work! [Bind9 running on Debian 7; virtualized through Proxmox 3.1] [duplicate]

First I'd like to thank everyone in advance for helping me - communities like this are exactly what amatuers like myself need when faced with perplexing issues. I've recently begun virtualizing ...
0
votes
2answers
118 views

how can I add records to the zone file without restarting the named service?

I'm working on centos6.5 and bind9 and I have managed to add records to a DNS zone by doing this steps: creating the key: dnssec-keygen -a HMAC-MD5 -b 128 -n HOST example.com. editing conf. file: ...
1
vote
2answers
46 views

Can DNS Caching Be Disabled for a Single Domain (BIND)?

I have a BIND server (CentOS 6) on my local subnet handing my DNS requests. I also have a domain which points to my GoDaddy VPS. I would like to configure my BIND server so that it won't cache any ...
0
votes
1answer
32 views

BIND9 on CentOS issue querying from Windows

I've just built a CentOS 6 server and configured BIND9 (named) to run. Zone files are configured and NSLOOKUP, DIG and HOST are all working from the CentOS box. When I move to my Windows PC, nslookup ...
2
votes
2answers
202 views

BIND DNS server (Windows) - Unable to access my local domain from other computers on LAN

I have a BIND DNS server running on my Windows 7 development machine and I'm serving pages with WAMPSERVER. My ideia is to develop some tools (in PHP) for my intranet at work and I want them to be ...
0
votes
2answers
28 views

How to connect a domain name to a host?

I have register a domain on internet like domain.com. I have a server on internet which have installed bind9 service on it. I have enter my name server on DNS tools on my provider domain name manager ...
0
votes
0answers
207 views

ZPanel configuring DNS for multiple domains

I want to have nameserver ns1.primary.com and ns2.primary.com to be used by all my domains. I've created domain primary.com and other secondary domains through zpanel and created DNS entries for ...
0
votes
1answer
39 views

Difference between rndc and nsupdate

Im setting up environment for dynamic dns updating and was testing nsupdate, but then again there is rndc tool. What is the difference between those two?
0
votes
1answer
77 views

Sinkhole Planning

I am currently planning on setting a network sinkhole in my... network. I have a list of sites that I want to block, around 300k of them. What is the recommended way to do this. My computer is its own ...
1
vote
1answer
163 views

reverse DNS lookup returns different Domain name

A little while ago i set up reverse lookup for our DNS server. The DNS server is very simple. I'm using BIND9 running on Debian jessie. The IP addresses are all static. The zone file looks like this ...
1
vote
2answers
21 views

BIND9 ZONES configuration

I want bind to forward address that have (ico|jpg|png|gif|mp3|js|css|mp4|flv|swf|json) extentions. Is it possible to do something along those lines...
0
votes
0answers
33 views

Bind DNS Forwarders Issue

I have setup forwarders in my BIND named.conf.options file. Like this: forwarders { 8.8.8.8; 8.8.4.4; }; And when I use the command:dig google.com everything works as expected. But the ...
0
votes
1answer
61 views

Host Custom Domain with VPN?

is it possible to host a custom TLD on a VPN? And if so, does that mean that to resolve the custom domain you just have to be connected to the VPN? Thanks again, Francis
0
votes
0answers
291 views

DNS works only with ip but does not work with NS CentOS + Bind9

I am having a headache with DNS. Lets say my public IP is 1.2.3.4, my local IP is 192.168.0.10 and my domain is example.com I am running CentOS on a virtual machine (Parallels Desktop for Mac) with a ...
0
votes
1answer
1k views

How do I debug Bind9 DNS server configuration? It is not sending requests to forwarders

I have got DNS Bind9 server installed on my VirtualBox Debian host. Another host from the same network has the nameserver address set as IP_OF_MACHINE_WITH_BIND. This was working ok for some time. ...
1
vote
0answers
300 views

dhcp static assignment doesn't clean bind after DHCPRELEASE

I've got a set of virtual machines inside VirtualBox on a OSX host. My Gateway-VM is Ubuntu 13.04 with 4 NICs. On this machine ISC-DHCP-Server and Bind9 are running and DDNS-updates work fine when ...
0
votes
2answers
79 views

Troubleshot erronous BIND9 DNS Address entry

I setup a BIND9 DNS server in the LAN as a backend to Samba4 service. The network address of my LAN is 192.168.2.0/24 and I statically specify the IP address of DNS server as 192.168.2.144. ...
0
votes
2answers
114 views

How to attach my domain with bind in real www

I install bind9, with apache. my dig, host, nslookup and ping provide this info: my system ip address: 59.177.154.251 my domain name: imsingh.com my domain registrar: GoDaddy.com When i write ...
0
votes
1answer
155 views

DNS nested $GENERATE directives - is it possible?

Is there a way to use the $GENERATE directive, in bind, in a nested fashion? Like: $GENERATE.$GENERATE.GENERATE.127 IN PTR localhost Or: $GENERATE.$GENERATE.10.in-addr.arpa" { type master; file ...
0
votes
1answer
492 views

BIND9 SERVFAIL Issue with Windows 2008 R2 DNS Server

I was looking over a strange problem with BIND 9 when one of my Windows 2008 R2 instances is pointed to it as a forwarder. Specifically, when DNSSEC is turned on in BIND, some domain names fail to ...
0
votes
1answer
588 views

How to configure a 10. network in bind? (PTR)

I'm trying to configure a zone for a 10.0.1.0/24 network. I have rfc1918 zones defined, but then I commented out 10.in-addr.arpa network, since I'm neading it. I then configured a db.1.0.10 file ...
0
votes
1answer
220 views

View-specific DNS forwarding?

I'm setting up a server which, as one of its roles, will be acting as a gateway for guest wifi. I want to set up BIND so that queries coming from the main network will be normally resolved but if the ...
0
votes
1answer
223 views

Can Dnsmasq or DNRD forward all DNS packets pass my router?

I have a embedded Linux box as a router which has two interfaces. One interface is connected to public network by dialing into ISP. Another interface (its IP is 192.168.1.1) is connected to LAN ...
1
vote
2answers
272 views

Bind9 cache automatic refresh

I have a small server (Ubuntu 12.10 x64) at home that acts also as a DNS cache for my LAN (using BIND9). I tried to have a look at the documentation and it appears there is no way to configure it so ...
0
votes
1answer
66 views

Set Server Host Name

I wan't to publish my hostname so that I can access the server from anywhere I want. How can I possibly implement this in golang? This can be related to defining java.rmi.sever.hostname to my IP ...
0
votes
1answer
183 views

Issue with my DNS and PTR record setup

I have been trying to setup my DNS server, and I have got powerdns configured to do basic stuff. My issue is that RPT records doesn't resolve correctly when I run dig command against public DNS ...
1
vote
2answers
2k views

DNS server using BIND9 for LAN [DEBIAN]

I am trying to configure LAN DNS server using BIND9 on DEBIAN. Context: network mask: 255.255.0.0, network IP: 10.1.xxx.xxx I own a public domain example.com, managed by external NS and my aim is to ...
1
vote
2answers
435 views

Why do you need two different IPs for each NS record in order to run DNS test

Some of my domains run using two different IPs for each ns property in their DNS records, e.g.: ns1.example-1.com 5.5.5.10 ns2.example-1.com 5.5.5.11 and some of my domains have the same IP for ...
1
vote
1answer
411 views

Multiple DNS BIND servers (zones), for same domain

I wonder if something like that is possible. To have one domain, handled by 2 DNS servers, master zones. For example, I have the domain, domain.com on a registrar and I want to make ns1.domain.com ...
0
votes
2answers
259 views

BIND9 & Webmin new DNS nameserver not accepted by registrar

I have trouble and headhakes with BIND9 on Debian6/64, made with Webmin. Basically I don't think Webmin is a problem, but I am just mentioning it. So, I made a DNS master zone with BIND and the ...
1
vote
1answer
443 views

Why are DNS setup guides using private IP addresses in their examples?

I'm attempting to set up BIND9 on my server, and am attempting to follow a guide I have found online. One thing that sets off a warning flag for me is that every guide I've found seems to use private ...
2
votes
0answers
537 views

Is it possible to host a BIND server within the AWS EC2 infrastructure? [closed]

So my question is if it's possible to set up a BIND server within the infrastructure of EC2. I got tired of paying for DNS services and wanted to try my hand at configuring my own BIND server, ...
1
vote
1answer
3k views

BIND named… unknown host

I have a very basic home network: A CentOS 6.3 server (storage, DNS, httpd, etc), a desktop, several laptops. I was running an old version of CentOS on the server for a long time (5.4 or something) ...
0
votes
1answer
1k views

DNS resolving broken after installation of bind due to iptables

I successfully configured my web server (Apache, PHP etc.) and blocked the ports I don't need using iptables, which was working perfectly fine. Today, I installed BIND and configured it, which also ...
-2
votes
1answer
109 views

What DNS setup is required to resolve my domain name(e.g. example.com) into an IP address?

I am using Amazon route 53 as my DNS service provider. I would like to resolve my own domain name into an IPv4 address. Similar to resolving twitter.com into 199.59.148.82, or facebook.com into ...
1
vote
2answers
176 views

Are my proposed BIND (DNS) Zone schemas valid

I am trying to provide a level of failover control (between 2 sites) using DNS (bind9), and I am unsure if what I am planning to do is compliant with the specs and if it will work reliably. The core ...
0
votes
2answers
431 views

How to set the logging clause for a chrooted BIND?

This question is a bit similar to this one but the answer that seemed to help the most is Ubuntu specific, and this is running on OSX 10.6.8. With this logging clause: logging { category ...
1
vote
1answer
384 views

Setting up BIND on OSX, which of these default port configurations is preferrable?

I'm following the instructions here on how to set up BIND on OSX, and I've got as far as this point (not very far then!) Watch out! The rndc-confgen utility is extremely handy for generating new ...
3
votes
1answer
589 views

Pointing my domain name to my home PC

I was previously paying for a VPS but have decided to setup a home server instead to save money. I have a static ip address 12.34.56.78 and have registered a domain name mydomain.com. I am running ...
1
vote
0answers
265 views

How to setup DNS server behind a VPN

I want to host some websites behind a VPN and I need some help with the finer points of the configuration. Thus far I've settled on OpenVPN + Bind9 and I want to configure the domains like this: ...
1
vote
2answers
856 views

Set up “smart” DNS server

I'm in a restricted network and I want to setup a smart DNS server for personal use. I don't want to use any VPN services since it required setup on my Windows 8. I don't want to encrypt internet ...
1
vote
2answers
395 views

Setting up DNS server on VPS on the internet

I have followed multiple online tutorials on setting this up, it is BIND9 on a debian server. It is the only server I have, so it is acting as both ns1, ns1, and the server they domain name should ...
0
votes
0answers
66 views

Setting up BIND9 on Debain

So I've got a VPS, and registered a domain name and I want to have the domain point to the VPS. I have installed and configured BIND9 (on the VPS that the domain should point to). If I ping my ...
2
votes
1answer
77 views

DNS server hostname.domain.com

I have a BIND server setup on my Ubuntu box and it works great if I navigate to server.home.com I was wondering if there is a way to set it up so that I can just type home.com Thanks!
0
votes
1answer
328 views

Windows 7 + Bind on Ubuntu - DNS keeps stopping

I have a Bind DNS server running from Ubuntu 12.04 LTS Server 64 bit. In there, I've setup some local A records for internal websites, e.g. wiki.domain.local. Everything works fine, except that ...