BIND is by far the most widely used DNS software on the Internet. It provides a robust and stable platform on top of which organizations can build distributed computing systems with the knowledge that those systems are fully compliant with published DNS standards.

learn more… | top users | synonyms

1
vote
1answer
17 views

Lookup correct, yet no ping

I have setup a local raspberry pi to be a DNS server for the office. It worked (almost) perfectly, until we moved down a floor in the office. The firewall and setup for the network is exactly the ...
0
votes
0answers
15 views

Reverse DNS setup not working - BIND on CentOS 7

I haven't setup BIND before but am quite knowledgable with DNS (I'm from the Windows world). I'm having a reverse DNS issue. Forward DNS is working fine for the zone int.linuxlab Here are the ...
3
votes
1answer
857 views

tmux: trying to bind utf8 key

I'm using tmux 1.6 with konsole on Fedora 17 i686. I have an azerty keyboard (with accentued chars), and I want ton bind 'ù' key. I made the following ~/.tmux.conf: setw -g utf8 on bind-key ù ...
0
votes
1answer
26 views

Why can't I have two records for the same name with different TTLs?

I just renewed my TLS certificates, but I haven't installed the new ones yet. I thought I'd add new TLSA records, lower the TTLs of the old ones, wait a while, then swap the certs out and delete the ...
0
votes
1answer
3k views

How do I debug Bind9 DNS server configuration? It is not sending requests to forwarders

I have got DNS Bind9 server installed on my VirtualBox Debian host. Another host from the same network has the nameserver address set as IP_OF_MACHINE_WITH_BIND. This was working ok for some time. ...
0
votes
1answer
30 views

How to navigate to a subdomain without specifying the domain? (in a web browser)

I want to be able to navigate to my home network's web server from my browser without having to type in any domain or top level domain. For example, I want to type: http://mylinuxbox/ and have it ...
0
votes
0answers
21 views

Incorrect WINS record on Linux for NetBios, removing bad WINS record

So I have a Ubuntu 14.04 server that I'm trying to get to run as a Domain Controller for a set of Windows machines. I've set up a Bind9 DNS and it works fine, pinging the nameserver gives the correct ...
0
votes
1answer
15 views

Routing requests to my local domain's www to an external www server using bind

Goal I want to get my web browser to display the contents of the page at http://www.google.com when I navigate to http://www.domain.tld (leaving the latter in the browser address bar after loading). ...
1
vote
1answer
50 views

Using sub-subdomains with bind

Can you put multiple levels of sub-domains in the main zone with bind? I have one zone called example.com and I want to create a sub-domain like host01.nyc.us.example.com. Can I make an entry like ...
0
votes
1answer
150 views

One DNS server host two different domains with same NS record?

I'm running bind9 on Debian 8 x64 and want to host two zones for my web site: example.com example.net I configured the named.conf.* files, set up the db.example.com and db.example.net in the zones ...
0
votes
1answer
26 views

should i add an additional dns name to the zone for nameserver instead of using just its default hostname?

On a BIND install for a machine that is hostnamed falcon here is my(only) zone file for my LAN web development environment. $ cat /var/named/ld.pvt.zone @ IN SOA ...
0
votes
1answer
66 views

Setup local domain for private network without editing hosts files

The Problem I host a local website at 192.168.1.2 using WAMP. My router is at 192.168.1.1 But i need a way to provide a hostname to this website. It is not feasible to edit the hosts file on each ...
0
votes
0answers
15 views

Nautilus could not create

I have installed BIND 9.0 after successfully installation it created one user called named Uid =25 Gid =25 I tried to login with this user but I'm getting below error messages Nautilus could not ...
-1
votes
1answer
33 views

When running a bind server where do i specify my lan machines hostnames?

So im running an arch linux bind server, and trying to acomplish a pseudo local development domain called ld.pvt so that from my other machines i have web accessible access to the web servers on the ...
1
vote
1answer
60 views

rndc sync -clean example.com on a DNSSEC singed zone

I’vve got a DNSSEC singed zone with dynamic updates and automatic resigning. But if I run: rndc sync -clean example.com example.com.signed will be updated, but not the unsigned file where I add new ...
2
votes
0answers
65 views

Bind on different port with linux

I have a bind9 DNS server that I have configured to run in port 55 but I can't get the setup working. The server is works fine but I can't tune my local machine to resolve nameserver queries from ...
0
votes
1answer
87 views

Chrome seems to bypass local DNS server occasionally

I run my own caching bind server on my local network with a properly configured zone for my local domain 'local.lan'. This bind server happens to be running on an ESXI host inside an Ubuntu 14.04 ...
0
votes
1answer
87 views

Centos 7 bind returns nothing

I have tried making a dns server, but when i do the dig command the server returns nothing. I have not had any prior experiences and am only following this tutorial: ...
-1
votes
1answer
93 views

Centos 7 bind issue

I am trying to configure a bind dns server on Centos 7. I have no previous knowledge on setting up dns servers, i am following this ...
0
votes
1answer
54 views

assign ip address to domain name

I have Ubuntu 14.04 VPS with PHP, Apache and MySQL, also have 1 dedicated IP address and a register domain with following free Name server: freedns1.registrar-servers.com ...
2
votes
1answer
74 views

Dual NIC ubuntu yields wrong name resolution

I have a host with 2 NICs: eno16777736 Link encap:Ethernet HWaddr 00:0c:29:65:db:43 inet addr:192.168.129.129 Bcast:192.168.129.255 Mask:255.255.255.0 eno33554992 Link encap:Ethernet ...
10
votes
4answers
3k views

How do I setup a local DNS server on Mac OS X 10.7 (Lion)?

I had some serious lag to resolve website address and sometimes things simply wouldn’t load; pages keep loading for 5+ minutes without even a timeout error. So I had setup a local DNS server/cache ...
1
vote
1answer
136 views

named[773]: error (host unreachable) resolving 'B.ROOT-SERVERS.NET/AAAA/IN': 128.63.2.53#53

I keep getting the following error messages in my syslog: named[773]: error (host unreachable) resolving 'B.ROOT-SERVERS.NET/AAAA/IN': 128.63.2.53#53 It seems to happen for all the root servers ...
0
votes
0answers
44 views

Windows Server DNS Configuration on Multiple Controllers and Zone Transfer

Let's assume I have two domain controllers running Windows Server 2012 in different subnets. As far as I know that version of Windows Server assume them as two masters with equal rights, so any change ...
1
vote
0answers
47 views

Bind configuration?

When I execute dig static.acer.com I have a different answer than if I use google's DNS. With my dns server : # dig static.acer.com ; <<>> DiG 9.10.3 <<>> ...
0
votes
1answer
579 views

When using nsupdate to update both A and PTR records, why do I get “update failed: update RR is outside zone (NOTZONE)”?

When using the following input to nsupdate to assign both an A record and a PTR record at the same time: server dns01.example.com update delete pup01.example.com. A update add pup01.example.com. 300 ...
-1
votes
1answer
73 views

How can i register on dns bind, 2 domains with same ip? Below is the configuration of my dns

zone "zget.com" { type master; file "/etc/bind/db.zget.com"; }; //reverse zone zone "168.192.in-addr.arpa" { type master; file "/etc/bind/db.192"; }; ; ; BIND data file for ...
3
votes
5answers
3k views

Bind IP address to application

I have multiple network interfaces on a single machine. I am wondering how I can bind a network interface to an application. Example: Network Interfaces: eth0, eth1 Application A use dummy0 ...
0
votes
0answers
28 views

DMA/CPU/BIND/NFS and polling

Which of the following is not true? (a) CPU enables interrupts while the DMA is transmitting information. (b) BIND binds SOCKET to an IP address. (c) NFS executes the same request again even though ...
0
votes
1answer
99 views

Disable DNS proxy in Internet Connection Sharing

I have BIND installed and ICS enabled. When computer starts, ICS binds 53 port before BIND. I tried to set ICS dependency from BIND, but looks like named need some time before port binding, and ICS ...
1
vote
1answer
27 views

Custom DNS server. How they reach each other?

If I have a domain, say example.com at GoDaddy, and a dedicated server, say, 123.123.123.123. I created 2 records in my named server inside my dedicated machine telling to point ns1.example.com and ...
0
votes
0answers
64 views

Windows Enterprise Authentication without Domain Binding

Is there a method for authenticating a windows 7 enterprise installation against a local KMS server without removing it from its workgroup?
0
votes
1answer
347 views

dns forwarding for specific zone not working - bind

In bind we created specific zone and got set a forward options, but it fails to resolve. Details as follow, For mydomain.com dns working fine. but we use developer site called mydomain.com.dev we ...
0
votes
0answers
257 views

dig: couldn't get address for 'server.mydomain': no more

I'm trying to configure a DNS server. I thought it was ready but, when I execute: $ dig +trace +additional cigefi.ucr.ac.cr I get: ....... ns1.ucr.ac.cr. 18000 IN A 163.178.88.4 ...
2
votes
1answer
457 views

Site displays with Curl but not within the browser

I've set up a dev-enviroment on Debian 7 and installed the following services: Apache Bind9 I have one site that is reachable through "asix.debian.local". I've set up the zone and added NS and A ...
0
votes
0answers
153 views

Samba 4 AD: “samba-tool dns” commands do not work from dhcpd script

I've set up my RPi 2 as Samba 4 AD DC with these instructions - https://wiki.archlinux.org/index.php/Samba_4_Active_Directory_domain_controller That page contains script ...
0
votes
1answer
32 views

How to update Zone File to add A-records

I need to to automate the addition of a-records to db.mydomain.com. I've tried to simply edit the file with sed and echo commands, but this doesn't work. It's creating a similarly named file besides ...
1
vote
0answers
921 views

openwrt ping: bad address on DNS entry. IP is fine

I have two centos/bind dns servers - masterdns.internal.example.com secondarydns.internal.example.com if configuring a desktop I can assign the DNS addresses for each and can successfully ping ...
0
votes
1answer
239 views

What is the proper way of setting up two IP’s with one domain name?

I have two Ubuntu Servers (S1 & S2 for example) on two different public IP’s (static & are in different locations). I got a domain name from GoDaddy. Lets call it, example.com. I have setup ...
1
vote
0answers
44 views

Linux Name Resolution-Samba or Bind

I'm trying to make sure that all my PC's(with any OS) & mobile devices can see my Linux computer's name(x100 for example). Is using Samba the best option for this? Or if I install a DNS Server ...
1
vote
2answers
354 views

how can i set up BIND to use a different DNS for a specific domain

at work we are using a VPN tunnel to communicate with an external network that is set up for testing. There is also a DNS running inside this external network, and I would like to have a local DNS ...
2
votes
1answer
7k views

Mounting Directories with bind & different permissions

I’m running Ubuntu 13.04 & trying to mount a folder using bind in /etc/fstab. Shown below is one of many similar entries; /media/Storage1/test /media/Storage1/WebDAV/Alex none ...
1
vote
1answer
104 views

How domain provider's DNS name server entries work?

Scenario: You buy domain abc.com from provider XYZ. You want to host your own DNS server on example.com (on ns1.example.com ns2.example.com). The domain and both subdomains will point to same IP. XYZ ...
0
votes
2answers
1k views

Reverse DNS Zone not working properly BIND9

I am using the 10.0.0.x scheme for my LAN. I have a Raspberry Pi that hosts certain services, including DNS. I am running into a problem with what I think is my reverse zone. The RPI is on ...
1
vote
0answers
7k views

Why does nslookup give me NXDOMAIN in this case?

I'm configuring a DNS in Fedora. I have the zone file: $TTL 86400 $ORIGIN example.com. @ IN SOA ns.example.com. root.example.com( 2013121201 ;Serial 28800 ;Refresh 15 ...
0
votes
1answer
59 views

Solaris BIND / VI - how to view special characters in a zone file?

I'm having some issues with a new zone file and I recall previously that I was prone to using some special characters somewhere that confused BIND. Is anyone aware of a command that would show all ...
1
vote
1answer
173 views

How do I create a batch file to insert text from a .txt to a new txt and repeat the task?

wow, bad title, but here is what I am looking to do. Text-file-1 contains: 123.com 234.com 567.com I need to have those values inserted into a new document in 2 places, and them move to the next ...
3
votes
1answer
2k views

How can you satisfy Google's requirement to enforce SafeSearch at the network level?

I have kids that are old enough to start getting curious, and, while I don't think it's an active problem, I'd rather avoid the usual garbage that comes along the average Google search. Google's ...
11
votes
1answer
879 views

Domain goes to localhost

I have a domain named ejn.nu. On some computers and networks, it sends the user to localhost when it should send the user to my server. When i do "ping", it shows the correct ip for my server and when ...
3
votes
3answers
3k views

Set up “smart” DNS server

I'm in a restricted network and I want to setup a smart DNS server for personal use. I don't want to use any VPN services since it required setup on my Windows 8. I don't want to encrypt internet ...