The tag has no usage guidance.

learn more… | top users | synonyms

1
vote
1answer
6k views

Manually Setting Interface metric priority of Network Adapters not preferring lower metric route on Windows

After Connecting to Cisco VPN AnyConnect, Now I have two network interfaces having set same default routes, but with different metric values. Even after manually changing/raising the metric value of ...
6
votes
5answers
40k views

Rerouting local LAN and Internet traffic when in VPN

I'm connecting to a VPN which doesn't allow split tunneling and basically reroutes my Internet traffic through, which is slow. Additionally and more importantly, this also effectively removes my ...
0
votes
0answers
153 views

Shrew soft connects to cisco VPN in windows 10 but no traffic passing

Recently I've upgraded to windows 10 and facing a problem with connecting to my workplace cisco vpn. Cisco vpn client refused to work. So I opted to install shrew soft vpn client. It says tunnel ...
0
votes
1answer
101 views

Cisco AnyConnect Secure Mobility Client - Multiple Profiles

I'm using Cisco AnyConnect Secure Mobility Client (3.1.05187) on my MacBook Pro (Retina, 15-inch, Early 2013) using OS X Yosemite 10.10.3 (14D136). I use multiple VPN Server and whenever I switch to ...
2
votes
3answers
4k views

Wi-Fi connectivity issues after installing Cisco 64-bit VPN client on Windows 7

How do I completely restore Wi-Fi settings and drivers back to Windows defaults? I installed an old Cisco VPN client (5.0.07.0290). It completely hosed up the machine I was working on. Once I figured ...
15
votes
8answers
14k views

vpnc - it keeps disconnecting after 24 minutes

VPNC for some reason keeps disconnecting me after a period of time. I've tried timing it to see how long it takes and it seems to be everytime after 24 minutes. After being disconnected I have no ...
0
votes
0answers
18 views

Linux: Don't allow any non-vpn traffic

I tried the search, as I'm sure this has been asked before, but I couldn't quite find a working answer. I wish to drop any connection that is not routed via VPN (with the sole exception of the ...
2
votes
1answer
5k views

Find the IPsec ID and Secret id for my vpn connection

Hi i'm using ubuntu and new to cisco vpn anyconnect client. I have installed it successfully and establish the connection by giving the user name and password. But it is showing the timeout error. So ...
0
votes
2answers
5k views

Cisco AnyConnect not Working

I'm trying to VPN into work with a new computer. I get one of two error messages: "Unable to complete connection: Cisco Secure Desktop not installed on the client" or "AnyConnect is not enabled on ...
44
votes
9answers
72k views

How to allow local LAN access while connected to Cisco VPN?

How can I maintain local LAN access while connected to Cisco VPN? When connecting using Cisco VPN, the server has to ability to instruct the client to prevent local LAN access. Assuming this ...
1
vote
1answer
148 views

Windows 8.1 Applying System Image Backup Errors, UEFI , Computer Architecture, etc

The struggle has been real since trying to update to Windows 10. Summary leading up to where I'm at now: July 29th, download Win 10. July 30th, create system image backup of Win 8.1 (thinking this ...
0
votes
0answers
49 views

IPSec Connection established but no IP-Traffic going through with OS X client

I've got a problem that's driving me nuts! I'm at my girlfriend's house here in California. She's got a Time-Warner-Cable internet connection with a Technicolor TC8715D cable modem/router. The ...
0
votes
2answers
4k views

Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates ...
1
vote
2answers
1k views

Cisco client VPN connects but no ping or VPN access after hibernate/sleep

I'm using Cisco Client VPN. When my laptop (Windows 7 Enterprise) sleeps or hibernates I can still connect (or least the client tells me the VPN connection was successful). However, I cannot ping or ...
0
votes
0answers
28 views

Cisco anyconnect add exception

My setup: I am having a D-Link DIR-600M wireless router. (firmware: 3.02) I am using Hathway service as ISP for internet. I am using "Cisco anyconnect Secure Mobility Client" to access my office ...
0
votes
1answer
119 views

Cisco ASA Full Tunnel Internet through VPN

I want to route all internet traffic of people who connect to my ASA, through ASA, so anyone who connects, their internet IP will be my router IP. This is my running config: : Saved : ASA Version ...
2
votes
2answers
2k views

Cisco AnyConnect VPN client - prevent connecting as work network

From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I ...
5
votes
0answers
11k views

Cisco VPN client on Windows 10?

I have been able to get the Cisco VPN client, the one which goes by the name vpnclient-winx64-msi-5.0.07.0440-k9, on Windows 8.1 x64 machines. Now I have a Windows 10 TP machine. Has anyone ...
0
votes
1answer
82 views

Cannot SSH through VPN (Windows 8, Cisco Client), but ping works, and SSH from other machines works too

On my Ubuntu Linux workstation, I have a properly working SSH server. I can log on to this machine from other machines in the same (physical) network. My goal is to log on to this workstation from my ...
4
votes
2answers
10k views

The VPN client agent was unable to create the interprocess communication depot

While installing Cisco AnyConnect 3.1.05170, the following error message appears in a dialog box. Cisco AnyConnect Secure Mobility Client The VPN client agent was unable to create the interprocess ...
2
votes
1answer
10k views

How to properly install certificate issued to me?

I tried various ways to install certificate, but it seems it either not being seen by linux or something else is wrong. I got .pfx to be able to connect to another server via vpn (need to use Cisco ...
1
vote
1answer
33 views

DefaultSecondUser in Cisco AnyConnect Profile

I am editing my Cisco AnyConnect Profile's XML (C:\Users\Francky\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client on Windows 7). What's the use of the DefaultSecondUser field?
0
votes
1answer
36 views

Router to Receive Client-to-LAN and forward to LAN-to-LAN VPN

I work as Telecomunications Services provider and I usually connect to customer network by using VPN Softwares like Quidway SVN Client and Cisco Any Connect. But now, one of our customers does not ...
0
votes
1answer
115 views

Cisco Anyconnect VPN (Linux) won't launch

Using OpenSUSE 13.2 (64-bit), I recently installed the Cisco AnyConnect VPN. It shows up in my applications list, and I can try to launch it, but after about 10 seconds of the "loading" spinning icon, ...
2
votes
2answers
4k views

Cisco AnyConnect fails after initiating connection

I'm trying to VPN to my work place but Cisco AnyConnect fails after initiating a connection. It pops up an error that says The VPN client failed to establish a connection then it shows another error ...
0
votes
3answers
3k views

Cisco VPN client failed to enable virtual adaptor

I'm trying to connect to a server using Cisco VPN client 5.0.07.0290 on windows 7 but while it's trying to secure the communications channel it comes up with an error 'Failed to enable Virtual ...
2
votes
2answers
732 views

Automating tasks in OSX like VPN Connection?

I am using my school's VPN service to surf on netflix. I have to connect to the VPN most of the time. My school uses Cisco AnyConnect Secure Mobility Client. I have to enter password and accept a ...
26
votes
6answers
25k views

How to force split tunnel routing on Mac to a Cisco VPN

Any one know how to hack the routing table (on a mac) to defeat the forcing of VPN routing for every thing over a cisco VPN? pretty much what I want to do is have only 10.121.* and 10.122.* addresses ...
0
votes
1answer
176 views

Can my company know if I visited adult websites while connected to their VPN? [closed]

I use Cisco Anyconnect on my personal computer to connect to some services only available to my company's staff like timesheets etc. Yesterday I connected and forgot it connected, I then browsed adult ...
0
votes
1answer
1k views

Installing Cisco AnyConnect on CentOS 7

I have installed Cisco AnyConnect on CentOS 7. When I try to connect I get an error: /opt/cisco/anyconnect/bin/vpndownloader: error while loading shared libraries: libpangox-1.0.so.0: cannot open ...
1
vote
1answer
542 views

Cannot access remote network after connecting to VPN | Window7

I am using Cisco VPN client (5.0.07.0290) on my window7 machine (64 bit) to connect to the VPN network of my client. VPN client connection status is shown as "connected", but when I am trying to open ...
1
vote
1answer
144 views

How to get rid of some rules imposed by the Cisco AnyConnect 3.1.0?

My question is related to this: How to force split tunnel routing on Mac to a Cisco VPN I am having though a bit of hard time figuring out what to do. The problem I have is that, after I connect to ...
6
votes
6answers
38k views

Cisco AnyConnect Secure Mobility Client 3.1.03103. The VPN Agent service is not responding

Good day, Today, my Cisco AnyConnect Client suddenly stopped working and started giving the following error messages: 1st dialog: VPN Service is not available. 2nd dialog (after pressing mandatory ...
4
votes
1answer
11k views

The Cisco VPN Service has not been started

i'm trying to use Cisco VPN client, but i get the error: Error 56: The Cisco Systems, Inc. VPN Service has not been started. Please start this service and try again. Of course the service is ...
1
vote
1answer
482 views

How do I delete firewall rules with pf.conf? OSX Yosemite. -For split tunneling Cisco AnyConnect

I'm trying to follow these instructions to use split tunneling with my Cisco AnyConnect VPN Client connection. The VPN server is configured to not allow split tunneling and we cannot change that on ...
6
votes
4answers
9k views

Cisco AnyConnect VPN Error: “Failed to initialize connection subsystem.”

My Cicso AnyConnect VPN client on Windows 7 suddenly started giving the error: Failed to initialize connection subsystem. Rebooting didn't help. How can I resolve this?
2
votes
1answer
84 views

Cisco VPN Client - External URL are tracked?

I'm using a Cisco VPN client to connect to a local server of my society. Do they track all the URLs I visit when connected to the VPN Client? If I go for example on bbc.com, is it recorded in my log ...
11
votes
1answer
16k views

How can I get Cisco VPN to work on Windows 8 x64?

My university uses Cisco VPN Client for off-campus network access. We're using client version 5.0.07.0440, which doesn't appear to work with Windows 8. The installation completes with no problem, but ...
2
votes
0answers
600 views

Make Genymotion use a host VPN

I'm using Cisco's AnyConnect to connect to a VPN using my Windows 8.1 PC. When using the Genymotion emulator, I would like it to use the VPN too. However, although having Internet access from the ...
2
votes
1answer
7k views

Cisco Anyconnect on Windows 8.1 x64 machine

I cannot get Cisco Anyconnect VPN to run on any of my Windows 8.1 x64 machines. The message is not very helpful. There is also an error in the Event Viewer with source "WebVPN" and details ...
0
votes
1answer
444 views

DNS config has no effect

Neither this /etc/resolv.conf: domain xxx.com nameserver 192.xxx.xxx.xxx nameserver 130.xxx.xxx.xxx Nor this scutil output: $ scutil --dns DNS configuration resolver #1 search domain[0] : ...
0
votes
0answers
59 views

Cisco Anyconnect (V 3.1.05160) Username Caching

Our VPN for RSA authentication profile is keep caching/remember the username after the 1st login. Is there a way to set Anyconnect not to remember the username?
0
votes
0answers
378 views

Cisco AnyConnect VPN - Internet Access in Parallels VM, but not in VMWare VM?

I run OS X Yosemite and have the latest versions of Parallels and VMWare Fusion. I had been running a Win7x64 Parallels VM happily for a while, until it started to lose stability. I created a new ...
0
votes
0answers
72 views

Cisco AnyConnect VPN “ping: sendmsg: Operation not permitted”

So, here it goes. I'm currently using the AnyConnect client to get connected to a VPN. However, since about three or four days ago, I keep getting this annoying error. When I connect I have access to ...
0
votes
0answers
21 views

VPN icon at start up screen enable

I am currently using Cisco Anywhere Connect client 3.1 , initially at my Windows 7 Startup screen there is a VPN icon on the bottom right corner next to the shut down button. Recently it has been ...
3
votes
0answers
2k views

Cisco AnyConnect vpn stops internet connection in Windows 8

I have a VPN set up through Cisco AnyConnect 3.1.04072 on a Windows 8 laptop. I can connect to the vpn, but as soon as I do, all internet traffic stops. I've been researching for days now and I ...
10
votes
3answers
7k views

HTTP SSL VPN Client? (alternative to Cisco's AnyConnect VPN) [closed]

Is there any free HTTP SSL VPN clients around, one that can act as an alternative to Cisco's own HTTP SSL VPN client (called AnyConnect)? The Cisco AnyConnect client has acknowledged problems, with ...
4
votes
3answers
9k views

Connect using anyconnect from command line

I am trying to use cisco anyconnect 3.1 from linux command line to connect to a server. I can connect, but I have to submit one parameter at a time. I would like to connect from a script that will run ...
0
votes
1answer
593 views

VPN Setup On Windows 8.1

Long story short, I have the work old Cisco PCF file and have been asked to make it work with my new test Windows 8.1 work machine (without running any Cisco client), ie: using the internal Windows ...
0
votes
1answer
2k views

How to maintain multiple persistent vpnc connections on ubuntu

Mark Knowles' Blog has a good explanation on how to maintain a persistent vpnc connection. However, this doesn't work well for multiple vpnc connections (Connecting doesn't work for me, everything ...