**DO NOT USE!** This tag is slated for deletion See this meta discussion: http://meta.superuser.com/q/8402/107240.

learn more… | top users | synonyms

3
votes
0answers
2k views

Mac OS X Routing Table Protection

I'm looking for a way to protect my Mac OS 10.8 routing table. After connecting to my employer's network using the Cisco AnyConnect Secure Mobility Client, a bunch of new routes are installed into my ...
2
votes
0answers
402 views

How to break Lync / Cisco IP Softphone interaction when placing a call from Lync?

I have the following VoIP configuration on my Windows 8.1: a Lync 2013 client (connected to an OCS server) Cisco IP Phone (for PSTN calls) a speakerphone (speaker & microphone, namely a Jabra ...
2
votes
0answers
837 views

[cscan][error][scan_perform_scan] unable to set log callback for libhostscan.

I'm attempting to connect to a cisco VPN using AnyConnect client, the 1st of part of which involves going to a website and loading Cisco Secure desktop to confirm that my machine is suitable. This ...
2
votes
0answers
670 views

Cisco RV180 ipsec vpn to mac os x 10.8.2 default client Configuration

I would like to configure an IPSec VPN tunnel between my RV180 (server, last firmware) and my Mac OSX 10.8.2 laptop. I have little knowledge about VPN, and a bit more about network in general. I have ...
2
votes
0answers
1k views

DMZ forwarding on Cisco DPC/EPC2100 Cable Modem to Linksys Router for IP Cameras

I have one of the old Cisco DPC/EPC2100 Cable Modems and wanted to know if anyone has had any luck setting up DMZ on it? Link to modem: http://www.cisco.com/web/consumer/support/modem_DPC2100.html ...
2
votes
0answers
125 views

Piecing together low-powered hardware for an RS-232 terminal server

I'm working on reconstructing my Cisco lab for training/educational purposes and I found that the actual terminal server I have is dead. I have a couple of 8-port PCI serial cards which would be more ...
2
votes
0answers
491 views

How to set up wireless access on a Cisco router

I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has ...
1
vote
0answers
48 views

How to filter mac address

There is a main Cyberoam router. This router is used to supply network to four different areas. Each area has its own Cisco router. The Users connect through that Cisco router. Now I want to prevent ...
1
vote
0answers
62 views

How to find the IP address of the interface connected to the Internet on a Cisco device?

I have to subnet the Class B network of 128.0.0.0. I have already done the subnetting, but when writing out the interface IP addresses, I have no idea what that is for the router's interface ...
1
vote
0answers
54 views

Possibility to use Tomato by Shibby VPN Client to link with Cisco Easy Connect VPN?

I have a question of feasibility and would like to know your point. I have a Cisco RV325 configured with Easy VPN enabled at a first place. There, there is also a voip central. I have a WiFi phone I ...
1
vote
0answers
90 views

Setting up a computer lab w/ wireless bridge for network administration/pen testing practice

So I'm trying to setup a computer lab to practice network administration. My setup is: Home ISP router (assigned to 192.168.0.1) Separate Wireless Router set to bridge mode (b/c my girlfriend would ...
1
vote
0answers
17 views

Serial Port output history?

Is there a way I can go back and view previous serial sessions I have had? I use cu on ubuntu to open the serial connection. I need to see if I can find a traceback on my cisco router. thanks
1
vote
0answers
60 views

Cisco VPN, Site 2 Site Via VPNC Gateway

i may be barking up the wrong tree here, been racking my brains over this. I've been asked to setup a Cloud network which will house a number of services. They asked me to use our excisitng Cisco ...
1
vote
0answers
521 views

How do I remove all traces of the Cisco WebEx Connect IM program

Not sure how to as this question correctly. I had uninstalled or thought I had uninstalled the Cisco WebEx Connect program from my Windows 7 32b Professional machine. Followed the instructions to ...
1
vote
0answers
386 views

cisco vpn client driver error

Hi I am a Windows 7 enterprise ed user, trying to connect to Cisco AnyConnect secure mobility client and It gives out the "VPN Client driver encountered error" Followed by unable to establish secure ...
1
vote
0answers
74 views

why cisco VPNC work on the second time each time and not on the first time

I use the vpnc ( cisco VPN that installed on linux red-hat 6.X ) and the vpnc.conf file look like this more /etc/vpnc.conf ## generated by pcf2vpnc IPSec ID Comvwde IPSec gateway 217.118.6.7 ...
1
vote
0answers
194 views

Site to Site VPN - Openswan and CISCO A2A

Below is the diagram that the VPN connection between Openswan server and CISCO A2A. client A and B are remote hosts with static ips. client X and Y are behind the Cisco firewall. I can see ...
1
vote
0answers
2k views

Cisco AnyConnect client removes default gateway after disconnect, but only on Intel Ethernet Adapter not on wireless connection

I recently installed Intel Gigabit CT Network Adapter on my Windows 7 64-bit machine. Previously, I was using wireless connection and Cisco AnyConnect VPN client ver 3.1.0165. When trying connect to ...
1
vote
0answers
47 views

Is it possible to repurpose a Trend Micro IGSA (Cisco 1113) appliance server?

I have a practially unused Trend Micro IGSA appliance without any valid license. It's not hyper fast or anything but it is a x86 box with the same motherboard as in a Cisco 1113 and sports a ...
1
vote
0answers
146 views

VPNC cisco + quick mode response rejected error

I installed a vpnc on my Linux red-hat machine version 6.3 Most of the cases vpnc work well ( connecting to gateway customers by vpnc ) But against some particular customers ( Cisco gateways ) , ...
1
vote
0answers
92 views

Is this router/provider that blocks or does not support GRE protocol?

I am currently living in dorm and I have troubles accessing company's VPN. I wanted to make sure that problem lies not on my side before I go to ITS and start complaining. When I use WiFi I have no ...
1
vote
0answers
43 views

Website unable to connect to SQL Server

I have a very specific problem which has been plaguing me for months now. The issue is this: Every once in a while, the website will lose all connection to the SQL Server with the following error A ...
1
vote
0answers
264 views

Multiple PPTP VPN Client on Cisco 3G Router

I want the router to be a client to 2 independent PPTP servers, both are in different cities in Cisco routers. I have tested with one on cisco 1841 aqnd its working fine; but when I add the 2nd, its ...
1
vote
0answers
41 views

Security concerns with Open port

I am developer not an administrator. That's why i am here to get expert's views. My setup is of webform of 5 windows 2008 servers behind Cisco ASA5505 firewall. I have written a small application ...
1
vote
0answers
127 views

Wireless signal constantly fluctuates between -30 to -95dB, is this fixable?

My current ISP recently replaced or old modem with a new one with a built in router with wireless access. Because of this I decided just connect everything on that new router using switches, because I ...
1
vote
0answers
347 views

Share printer over VPN

I have a customer who just recently bought two Cisco ASA 5505's from us. He will be buying several more for each of his business offices, but for now we have one set up at his main office and one at ...
1
vote
0answers
176 views

Redirecting All Requests - Linksys Router

I currently have a Cisco WRV200 Wireless-G VPN router with RangeBooster, with that I've created an Access Point and set up a small Local Area Network. This Local Area Network obviously has no access ...
1
vote
0answers
751 views

How to configure ShrewSoft VPN for Cisco VPN with Token Code?

I am trying to get ShrewSoft VPN to work with a Cisco VPN connection that requires a next token code. With Cisco VPN or NPC Secure Client these are the steps I would take: List item Import .pcf ...
1
vote
0answers
81 views

Modem Throws me out of Wifi Network

I have a Cisco Router. At any point of time no more than 4 people can be connect to the network. And it keeps kicking me out of the wifi. If i disconnect and reconnect again am back on the network. IS ...
1
vote
0answers
894 views

Network connections disappear right after Cisco VPN client installation

I am trying to install and use Cisco VPN client on my machine. The VPN client version is 5.0.07.0440 64bit. My machine is Windows 7. Right after installation completes both my network connections ...
1
vote
0answers
446 views

BSOD caused by bcmwl644.sys against Cisco WiFi

I have in front of me an Acer V5 171, it is running a clean install of Windows 7 X64 SP1 will all current hotfixes and updates, with the latest drivers from Acer the version of bcmwl664.sys is ...
1
vote
0answers
4k views

Cisco ASA 5505. Site-to-site VPN on backup interface

I have Cisco ASA 5505 8.2(5) - ASA_1 in main office configured with three interfaces: outside - aaa.aaa.aaa.aaa backup - bbb.bbb.bbb.bbb inside - 192.168.10.1 Switching between outside and backup is ...
1
vote
0answers
507 views

'Installing' Cisco SSL VPN license on 891 IS Router

This is a 'what if' question to get me prepared for a job I might have to do in 2 weeks time. I support a charity that has a Cisco 891 Integrated Services router. It's (apparently) able to support ...
1
vote
0answers
270 views

How do I configure a Cisco 3600 Router as a second router, being SURE to not interfere with the existing production network?

Basically, I would like to set up a little lab here at work. We have a spare 3600 router sitting around, as well as some new-in-box RV042s that will be in production soon. I'd like to set up and ...
1
vote
0answers
175 views

Start call on Cisco Voip phone with an http link

I don't have any previous experience with IP phones. I'd like to know if there is a way to make a call with a Cisco IP Phone (model 7912) clicking just a web link. Actually the phone is connected to ...
1
vote
0answers
871 views

Wake on LAN & CISCO modem - WOL not possible?

i have a problem since the guys from UPC changed my old cable modem with a new CISCO EPC 3208 model. (It's a VOIP cable modem & i have static IP from UPC/my ISP.) Since then, WOL over the internet ...
1
vote
0answers
5k views

How to connect site to site from Linux IPsec VPN through a Juniper Junos SRX (210, 240 series) gateway?

It's been almost more than a week, but I seem to have no answer for this and can't really figure out how to solve this: I am using Fedora/CentOS Linux and have a Juniper SRX210 gateway configured as ...
1
vote
0answers
228 views

Route some websites through VPN to access US websites

I already have an IPsec VPN between two sites: 871W - Canada 2851 - US I'd like to route some websites through the VPN to use the internet connection of the 2851. Does anyone have sample ...
0
votes
0answers
5 views

Directly accessing eth0 when using Docker when Cisco AnyConnect Secure Mobility Client provides VPN tunnel

When VPN is active, all the traffic seems to be tunneled through csctun0. Using a VirtualBox I am able to set up a "network bridge" to eth0, which seems to completely ignore the manipulations made by ...
0
votes
0answers
16 views

Cisco 1811 router - How to open port 80/port forwarding

I've set up an IIS server on windows server 2012 r2, but I cant access it from outside the LAN using the external IP. When I check port 80 on yougetsignal.com is says that port 80 is closed. I have ...
0
votes
0answers
21 views

Cisco VPN disconnecting RDP

I have a Windows 7 Enterprise vm running Cisco VPN Client 5.0.07.0290. I'm connected to this Windows box via RDP. I have a Linux server that needs to route through the VPN on this Windows server. ...
0
votes
0answers
45 views

Cisco NAT problems (Packet Tracer)

I have a little problem with my NAT configuration. When I ping 2 separated PC or laptop, the ICMP packet does not "find" the route back to the source machine. The NAT translate the IP when the ...
0
votes
0answers
33 views

Cisco AnyConnect Secure Mobility Client Profile is overwritten after each successful connection

I use Cisco AnyConnect Secure Mobility Client version 3.1.10010 in Windows 7 in order to connect to three different VPN servers. AnyConnect Client should keep their hostnames together with their ...
0
votes
0answers
62 views

Connect to VPN without Cisco AnyConnect

My college offers a VPN service to connect to the campus network via the AnyConnect client from Cisco. Since I don't like to install proprietary software for a functionality that pretty much every ...
0
votes
0answers
25 views

Parental Control on Cisco DPC2420 blocks ALL websites

I setup the router to block ONLY facebook, but it blocks EVERY webpage I try to access. Here are some images, I'm using the default user.
0
votes
0answers
27 views

Error 1714 when installing Cisco Jabber

I'm having some trouble installing Cisco Jabber 10.5 on a users machine. It's usually pretty straightforward with the install but today I'm getting this error message. Before I tried anything else, ...
0
votes
0answers
20 views

Remove Cisco AnyConnect obsolete VPN

I have an obsolete VPN that Cisco AnyConnect keeps trying to connect to. I can't find the file that this is stored in so I can remove it. Can anyone lead me to where or how this can be removed ...
0
votes
0answers
41 views

“The VPN client agent was unable to create the interprocess communication depot” Windows 10

When installing Cisco AnyConnect Secure Mobility Client on Windows 10 I get a dialog box with the error message "The VPN client agent was unable to create the interprocess communication depot". I ...
0
votes
0answers
5 views

CISCO VPN Adapter takes away the focus from the current window

I'm using CISCO VPN Adapter on Windows 8.1. After I connect to the given VPN, it seems that something (I assume the VPN client) makes some traffic after every 5-8 seconds as it can be seen in this ...
0
votes
0answers
33 views

Teamviewer over SG300-52 52-Port without any others traffic

I have a VLAN1 IP 172.16.0.65, Subnet 255.255.255.244 and a VLAN2 IP 172.16.0.129, Subnet 255.255.255.244. I have set the switch to Layer 3. All I want is close all traffic between PC1 IP ...