-2
votes
2answers
44 views

Can my Motherboard handle this Graphics card?

I found this mother board online (Gigabyte GA-Z87X-SLI) and this graphics card (Gigabyte GeForce GTX 770 4GB PhysX CUDA). The graphics card has 4GB GDDR5 SDRAM. So this is the actual problem: The ...
3
votes
2answers
67 views

How to consider power supply when building a PC?

I've looked at multiple PSU calculators online and they've all given me a range around 600-800 Watts, most being closer to 800 W. However, I've looked at multiple forums that talk about how ...
1
vote
1answer
87 views

Connecting PowerSW and Reset SW

I am trying to build my first NAS and need help to connect the power SW and the Reset SW. This is an ASRock B85m Pro4 montherboard. The attached image is what I found in the manual. I put the numbers ...
10
votes
2answers
798 views

Building my own computer [closed]

I'm planning to build my own computer. I do not have enough cash to buy all components I need in one go. I want to ask, if I buy motherboard which is compatible with i7 processor (any) and compatible ...
0
votes
0answers
213 views

Boot loop before POST

I built a new computer two months ago: Motherboard: ASUS H87-Pro Processor: i5-4570 Memory: Vengeance LP - 2x 4 Go - PC12800 - 1600 MHz - CL9 - CML8GX3M2A1600C9 in slots A2 and B2. Case: Advance ...
0
votes
2answers
76 views

Computer will not turn on without the wires being pulled towards the power supply

I'm fixing a computer and what appears to be gaffer tape is holding the power supply wires together that connect to the motherboard. When the wires are pushed towards the power supply (the upper left ...
1
vote
1answer
268 views

HAF cooler master case. Audio confusion

The front io panel features audio in and out, however, I can't find the relevant cables for my motherboard. There is this HD audio connection, however. Does this audio connection plug into my ...
1
vote
2answers
148 views

Mounting motherboard but power led not ligting up

I have bought a motherboard and I mounted it on my case. I connected all the wires that is Power switch, Reset switch, HDD LED but the problem is when connecting power LED and ground. The power LED ...
1
vote
2answers
160 views

How to select memory for motherboard when building a new machine? [duplicate]

I am building a new PC. What resources do I use to ensure the ram I select is compatible with the motherboard I am selecting? Currently, this is what I know. The motherboard accepts a type of ram, ...
5
votes
1answer
178 views

Is Biostar's CPU Savior preventing my homebuilt PC from booting? [closed]

My 11-year old daughter and I built her first PC today, but now that all the components are in place, the machine will only turn on for a second then it turns off right away. Possibly Relevant Specs: ...
0
votes
1answer
254 views

Will a pedestal motherboard fit into a(ny) regular case?

I am looking to build a dual CPU workstation with a "long" graphics adapter and eight or more 3.5 inch drives. The problem is finding a chassis. Last time, I had to build a case out of wood to fit a ...
4
votes
3answers
516 views

Should I use plastic/insulating washers when attaching a motherboard to the case?

I'm screwing in a motherboard, around the screw holes in the motherboard there is a white painted circle and inside that circle are what look like eight pieces of solder. Do I need to put ...
1
vote
4answers
323 views

Burned motherboard component

I got a desktop computer assembled with the following specs: 2x 4 GB DDR3 Intel Core i7-2600 CPU, 3.4 GHz LGA 1155 8 MB Cache Intel DH67 BL Media Series motherboard, LGA 1155, 4 slot eSATA, HDMI, ...
2
votes
2answers
2k views

Not filling all RAM slots - will it make the machine volatile?

I have done some searching and I have not found a straight forward answer to my problem. As all the questions I came over searching were concerning using only two RAM slots with not more than 4GB of ...
0
votes
1answer
93 views

How to look for better hardware for my computer?

I have Iball Designer PC (model No not confirmed) and that have motherboard ...
0
votes
2answers
3k views

What's the difference between these Asus socket 1155 motherboards? [closed]

I've looked on Asus's website, but they don't make it easy to understand what the differences are, and there's so many models to choose from! It's all spiel, and endless specs. How is anybody supposed ...
0
votes
1answer
505 views

Is the case big enough? [closed]

Another first build question. Will this case CoolerMaster RC-942-KKN1 fit this motherboard Gigabyte GA-990FXA-UD5
1
vote
1answer
322 views

Will an e-ATX motherboard fit in a large ATX form factor case?

Is it possible (without drilling any holes or anything) to fit an e-ATX motherboard into a large computer case whose form factors are only ATX and micro-ATX? The case itself should have enough space ...
-3
votes
1answer
353 views

Building a workstation computer for Image processing? [closed]

I am taking a gigapixel image my goal is 50gigapixel and shooting is almost done , i am doing some research to build a workstation so i can stitch images together , my questions is ! Could u suggest ...
2
votes
2answers
5k views

Where can I connect this USB 3.0 cord?

My motherboard has 2 USB 3.o slots in the back, where the usual slots go, but the tower also supports 1 or 2 USB 3.0 ports in the front, above the DVD drive. So, there is a cord coming out of those ...
0
votes
2answers
317 views

Power supply switch like stays off motherboard light turns on

I bought a computer at the thrift store yesterday. The computer powered on without any error beeps. Getting it back to the house determined that the CD and hard drive needed to be changed. Put in a ...
2
votes
1answer
861 views

AMD Phenom II X4 965 crossfire motherboard

I am trying to build a cheap mining rig. I wanted to use the AMD Phenom II X4 965 (HDZ965FBGMBOX) processor as it got very good reviews and benchmarks, and is inexpensive. However, I am having trouble ...
0
votes
2answers
13k views

How to plug power/reset buttons from case to motherboard leads?

I have a motherboard I salvaged from a pre-assembled computer. Except now I'm trying to use it in my own custom build. The problem is, this motherboard doesn't have any documentation because it was ...
4
votes
2answers
13k views

Should I connect my case fan to a pwr_fan or chassis_fan header?

My ASUS P8Z68-V PRO/GEN3 motherboard has the following fans: 2 x Chassis Fan connector(s) (1 x 4-pin, 1 x 3-pin) 2 x Power Fan connector(s) (3-pin) The fan cable connector has three pins (and it ...
13
votes
6answers
9k views

Fitting a Motherboard into a Computer Case

I'm interested in building my own computer. I saw a motherboard and CPU that I want to buy from Tiger Direct. My question is has to do with computer cases and motherboards. Are all motherboards ...
1
vote
1answer
2k views

What things should I need consider when buying a motherboard? [duplicate]

Possible Duplicate: How do I know which hardware to buy to meet my needs? What things should I consider when buying a motherboard? I have several old hard drives that I would like to add ...
2
votes
1answer
1k views

Can I insert a SATA II (3Gb/s) drive into a SATA 6Gb/s slot?

The general form of this question is "Can a SATA II SSD plug into a SATA 6Gb/s port on a motherboard?" I am looking into building a PC, but I would like to get an SSD for my OS and some programs that ...
1
vote
3answers
278 views

What is a motherboard nut setter?

I'm building a PC, and with the case I have something called a Nut setter, I only have one of these but I'm not sure what it is used for. Could you explain what I could possibly need this tool for?
0
votes
1answer
888 views

Which motherboard sizes will fit my case? [closed]

I'm looking to upgrade my PC, it's about 4 years old now and was brought as a custom build from ebay, and came with a gnarly case I'd like to keep. I currently have a ASUS P5n SLI with a NVIDIA ...
1
vote
1answer
828 views

Is 4 pin 12v connector necessary in my motherboard?

I am building my new PC. I am really a newbie at this. Currently I have SIEMENS D1107 motherboard. I want to replace it with HP P4SD motherboard. But there is a one problem. The new motherboard has 4 ...
2
votes
3answers
668 views

Term used for a motherboard without integrated audio or video

I'm trying to look for motherboards without any bells and whistles (audio and video) in order to build an Audio Production workstation. Is there any special keyword I can use in my research that ...
2
votes
2answers
2k views

My Motherboard has 3 display outputs. Can I use 3 Screens?

I am just building my first computer (going to instal linux, probably Ubuntu). I have been a Mac boy for the last four years so I am feeling somewhat confused. I am thinking about getting this ...
0
votes
2answers
535 views

I bought a motherboard that supports DDR3 RAM

I bought this ASUS Sabertooth X58 motherboard from http://msy.com.au/product.jsp?productId=7301 But I'm not sure what DDR3 RAM to buy. I haven't built a PC from scratch in about 3 years, and I'm ...
1
vote
1answer
4k views

How can I determine whether a given SSD and motherboard are compatible?

How can I determine whether a given SSD and motherboard are compatible? For example, I have an OCZ Vertex 2 OCZSSD2-2VTX50G 2.5" 50GB SATA II MLC Internal Solid State Drive and a GIGABYTE ...
1
vote
2answers
613 views

Suggestions for a substitute I/O shield panel for Gigabyte GA-EP45-DS3L motherboard?

I have a Gigabyte GA-EP45-DS3L motherboard which is missing the I/O shield panel. While I'm not sure that I actually need the I/O shield, a part of me is still wondering how I might go about hacking ...
1
vote
2answers
3k views

Can I place an 8x PCIe 2.0 Promise EX8760T into the 16x PCIe 2.0 slot on my Asus P7H55-M/CSM? [duplicate]

Possible Duplicate: Will a PCI Express x1 TV tuner work on a PCI Express x16 slot ? The Promise card has a PCIe 2.0 8X interface, and the motherboard has a single PCIe 2.0 16x slot. My ...
1
vote
1answer
3k views

Comp turn on but doesnt beep and I get nothing on the monitor

My dad and I have been building a computer from scratch. The problem is that: 1) Computer turns on, the fans and lights go on, but we're not getting any beeps. 2) The monitor says, 'Auxiliary power ...
1
vote
1answer
321 views

Why does my computer hesitate to turn on?

I just built my first computer, but every time I hit the power button everything goes on like it was starting up, then everything turns off for about 3 seconds, and then it turns on and stays on. Is ...
0
votes
1answer
69 views

IDE Light Not Showing HD Access

The IDE light on my computer blinks when the CD is accessed but not when there's hard drive activity. Isn't the light supposed to come on with any activity on the IDE channels?
1
vote
2answers
831 views

Computer only boots when CMOS set to Clear

I just put this computer together yesterday, and I finally had to go to bed last night. The computer only boots when it the clear cmos jumper is set to clear. This is really strange. I have tried to ...
4
votes
3answers
1k views

Steps when installing a new processor

I have a substantial amount of experience in IT as a software developer. I'm used to getting my hands dirty with the internals of PCs and have replaced almost every component therein. However, I ...
2
votes
2answers
1k views

Power/HDD/LED wire for motherboard - are they standard these days?

I'm not sure what it's called - the set of wires that connect the power button, LED, HDD activity indicator lights - to the motherboard. My question is, are they standard these days? Meaning, if I ...
4
votes
4answers
1k views

Picking a linux compatible motherboard

Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported ...
1
vote
2answers
232 views

Video adapter problem on new motherboard

Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds ...
0
votes
3answers
284 views

I/O ports vs case holes

I'm in the midst of building a new desktop (first time building my own). I bought MSI NF750-G55 AM3 NVIDIA nForce 750a SLI HDMI ATX motherboard, and HEC 6C28BS Black / Silver Steel ATX Mid Tower ...
2
votes
1answer
1k views

Does my motherboard support dual-core processors?

Hi there! I'm very confused about my motherboard (ConRoe945PL-GLAN) It's manual says, that i can use only some kind of ConRoe processors. But some pages on internet says that i can plug in almost ...
3
votes
1answer
1k views

downsides to running RAID on unmatched drives?

I've got some generic RAID controller built into my motherboard and I want to build either a RAID 5 or RAID 0+1 array. What are the disadvantages of running unmatched drives? Like 4 different brand ...
0
votes
1answer
213 views

Will Intel® Desktop Board D975XBX2 fit inside Thermaltake Armor+ Case

I have this motherboard Intel® Desktop Board D975XBX2 CPU Quad Core I want to Buy Thermaltake Armor+ case With powerSupply Aerocool E85-700 Will those three work because i have put components from ...
2
votes
5answers
2k views

What parts I need to assemble my own computer?

I want to assemble my own computer. I think I need the following parts, correct me if I am wrong. CPU cabinet Power supply -- 500 watt Motherboard Processor RAM Hard disc And then Monitor ...
3
votes
1answer
2k views

compatibility with modern motherboards? (ATX 12V vs EPS 12V)

I have the Seasonic S12-600 in my current PC, which I'm thinking of upgrading from its ageing s939 Athlon CPU to a Core i5-based system. My question is whether or not my PSU is compatible with modern ...