DO NOT USE - This tag is being removed as part of our clean up process - See link in Tag Wiki for more information.
2
votes
0answers
35 views
What is the `/etc/hostname` used/required for?
I found in the /etc/hostname my IP-address, than I deleted it and each time I use sudo - I get a message and a system email sudo: unable to resolve host (none) or if in the /etc/hostname is saved ...
2
votes
0answers
89 views
read unix config file from CLI
I need to access a configuration file from a Makefile, and thus seek for a short-readable-maintanable way of doing. The file is a python
ConfigParser compliant file.
#foo.cfg
[foo]
bar = baz
I use ...
2
votes
0answers
236 views
Games consoles won't connect through the TP-Link TL-WA500G Access Point
I have several Laptops and other devices, all using my Wireless Router (Sky Digital Netgear). To extend the range to the back of the house, I purchased a TP-Link TL-WA500G Range extender, configured ...
2
votes
0answers
107 views
Can I configure Microsoft Word to scroll to the correct “next” line when pressing the down arrow (viewing two pages wide)?
I like the feature within Word that shows two pages on the screen side-by-side (not using the "View Side by Side" feature, but simply editing the document at a high enough resolution with the zoom low ...
2
votes
0answers
121 views
Switching left and right mouse button functions without switching mousepad buttons
I'm left handed and thus I've switched the functions of the left and right mouse buttons so that the right button is the primary. However, I find that when I'm not using the mouse and thus need to use ...
2
votes
0answers
208 views
Vim cursorshape in OS X Terminal
I compiled vim 7.3 with +cursorshape and added the following to my ~/.vimrc:
set t_SI = "\<Esc>]12;purple\x7"
set t_EI = "\<Esc>]12;blue\x7"
but Terminal.app still displays the same ...
1
vote
0answers
85 views
RPI - Configuring ethernet
I need to connect to my university network which is a bit tricky doing on RPI.
I cannot find how to complete the manual set up steps described on uni site , and the app that configures network ...
1
vote
0answers
37 views
Where to add sendmail path in modular muttconf
I use folder hooks in mutt to be able to use it for multiple imap accounts.
I can access the different imap mailboxes without problem via key-bindings and can also switch between them.
I followed ...
1
vote
0answers
615 views
Ubuntu Squid config example
I am using Ubuntu 12.04 amd64 and have just installed the Squid 3.1.19 Ubuntu package.
From the Squid Configuring Page, I find that the default config for Squid 3.1 is :
http_port 3128
...
1
vote
0answers
511 views
Windows 7 64bit side-by-side config error?
Since a recent windows update, I've been unable to run almost any program (including firefox, ie and origin) due to the following error:
The application has failed to start because it's side-by-side ...
1
vote
0answers
35 views
Synchronise configs on all my systems
I am looking for a tool that would "make all my (linux) systems look the same". What I mean by this, is that I use many programs that put some kind of global config file in my local home folder. Say ...
1
vote
0answers
172 views
Outlook, Config file for users and signatures
I'd like to create a program which format signature in Outlook 2007.
For this, I need know where Names Accounts are located in Windows 7 ?
I also need to know where is the config file for signatures ...
1
vote
0answers
550 views
vcs_info, proper config in zsh?
I've recently installed zsh and took the time to configure it properly, quick overview of methods tried:
setopt prompt_subst
Use prompt_subst so we can simply use the vcs_info variables and they'll ...
1
vote
0answers
60 views
How do I share sound settings with different users on Vista?
I have carefully set global system sounds (like windows startup/shutdown) for my user in Windows Vista Starter and now I see other users don't have access to the new profile. How can I share my ...
1
vote
0answers
202 views
How to configure the printer to stop after the page content is finished , irrespective of the page setup?
I'm printing an invoice from the browser and the invoice size may vary.
I've set a page size of 6 inches width and 5 inches height..
Even if my invoice is just 2 lines it would take up the whole 5 ...
1
vote
0answers
381 views
How to set up wireless access on a Cisco router
I've set up my 877W according to the configuration listed in this forum post:
IPTV over Cisco 877 (It's the working configuration at the bottom of the post)
Note that I have an 877W, so it also has ...
1
vote
0answers
414 views
CKEditor configuration, prefer img tag atrributes over inline style
Looking for a way to disable a feature in CKEditor that messes with attributes height and width on my and converts them into inline styles.
The version of CKEditor is 3.2 and I have access to config ...
1
vote
0answers
105 views
RAID 5 configuration and future expansion
I am building a PC to act as a file server among other things, and I was wondering whether it is a good idea to create 2 partitions on the RAID 5 array, one for OS one for data, or to have a separate ...
0
votes
0answers
13 views
OpenSSL certificate valid immediately
I am simply looking for the option in the openssl.cnf where to set the certificate validity immediately. Actually all certs I create with my CA are valid after 30min after signing. I want them valid ...
0
votes
0answers
12 views
OpenVPN does not seem to complete connection sequence
My workplace has a VPN set up, which I sused to connect to using OpenVPN on Win XP. Now I'm trying to achieve the same on a Win 7 64bit box. I installed the OpenVPN client, put the config in the ...
0
votes
0answers
38 views
Configure Qt3 in CentOS 5.7
My workstation has been just updated to CentOS 5.7 from CentOS 4.x. This makes Beyond Compare breaks because it uses Qt3, not Qt4 which is being used by the CenOS 5.7 KDE environment. The Beyond ...
0
votes
0answers
24 views
what is a difference between apply in WIM image before deploy or apply that with GPO in domain
Microsoft teach in MCITP courses that you can apply many Configurations with many Tools for example:
You can apply your firewall settings with GPO
The best way to manage Windows Firewall settings ...
0
votes
0answers
171 views
Disable LAN in Beetel router
I have a wireless internet connection via a Beetel router (which supports wired LAN too). I want to disable LAN access through the router even if the Ethernet cable is connected.
What I have done ...
0
votes
0answers
19 views
Configuring PyDev
After speeding too much time trying to find out what went wrong with the installation of a new module in python, I realised that the root of the problem is due to fault configuration of PyDev plug-in. ...
0
votes
0answers
70 views
How to setup Bugzilla without SMTP server (no need to use e-mails)?
How to setup Bugzilla without SMTP server (no need to use e-mails) ?
I installed Bugzilla from the windows-installer. We just use it locally and don't need emails, nor we have any SMTP server.
This ...
0
votes
0answers
21 views
different options for xmonad workspaces
Is it possible to have different configuration options in xmonad for different workspaces, for example, having different focused window border colors in workspace 1 and 2? Is this something to do with ...
0
votes
0answers
701 views
Unlock BIOS in Acer Aspire 5935g
Is there any way to unlock the BIOS' Advanced menu in an Acer Aspire 5935G? I have VT-x capable hardware, yet no Enable option in BIOS.
BIOS: InsydeH2O Setup Utility Rev 3.5.
Version: 2.09
Global ...
0
votes
0answers
19 views
httpd authentication model for logged in network users
I have an application on a network server that has an intranet interface and a command line interface. When a user visits the app site via a browser, they are presented with an authentication box that ...
0
votes
0answers
320 views
Should I use /usepmtimer in boot.ini on a Intel processor (Windows 2003)?
Adding /usepmtimer to boot.ini changes how Windows measures time. It was a fix to not use the timer inside the processor since that timer gave incorrect values, /usepmtimer makes Windows look ...
0
votes
0answers
504 views
'Unidentified network' on D-Link, unable to contact DHCP server
I'm running Windows 8 Pro and have a D-Link DSL 2640-T connected to a D-Link DGE-528T. The relevant lights on both devices are blinking in a normal activity pattern. I also have an onboard wireless ...
0
votes
0answers
109 views
Configuring CESoPSN using Cisco MWR 2941
I'm trying to configure CESoPSN on two Cisco MWR 2941 routers, but the alarm LED lights are always lit. My configuration is modeled after this sample configuration.
My setup is as follows:
On the ...
0
votes
0answers
376 views
A way to force apt-get remove --purge to even remove non-empty directories from /etc
As an install script for VPS's I'd like to standardize installation and I'm trying to remove non-needed packages and clean their configuration folders. The problem is that some packages leave leftover ...
0
votes
0answers
112 views
mutt and forwarding messages inline
How can I configure mutt to forward e-mail messages like any other mail-client such as Thunderbird or MS Outlook? Usually attachments are attached again, the message itself (first text-attachment) is ...
0
votes
0answers
239 views
Linux Debian doesn't detect HDD (booting from USB flash drive)
I'm trying to install Debian on my HDD booting from USB flash drive but when I reach step called Disk partitioning I can see only my flash drive (/dev/sda automatically mounted as /cdrom).
When I ...
0
votes
0answers
90 views
CruiseControl.net - running as a service on multiple build machines
I have a Cruise Control (v1.5.726) install with various projects being built on several machines. Each machine builds whatever projects it is configured to run, and if the build is sucessful a copy ...
0
votes
0answers
25 views
Share creation automation / load config in config
I'm trying to automate samba share creation.
One could simply take the config file and add share regions to the config. But it would be pretty complicated to remove or modify them.
Another option ...
0
votes
0answers
84 views
In Emacs whitespace-mode, how can I turn on all face visualizations by default?
I'd like to have these turn on automatically whenever I apply whitespace-mode to the current buffer. How can I configure that?
0
votes
0answers
162 views
How does Elastic Search work with HBase?
I'm newbie in Elastic Search (ES) and HBase. I've read the tutorials and guide in ES home. But I got a concern that "How does ES work with HBase?"
I've read somewhere in the internet that I have to ...
0
votes
0answers
59 views
Mail Server not working?
I am trying to setup mail server since a long time but as I am new to Linux I have unsuccessfully configured it to the best as I could but now I need assistance.
I have installed it using the links ...
0
votes
0answers
30 views
Config samba in smb.conf
How can i config samba to solve this problem: every on can acces MyFolder, can read and write everything but only owner can delete. I tried sticky bit but i can not edit other's file.
Tks for help
0
votes
0answers
367 views
Configuration issue with PHPCSMD plugin in Netbeans
I am using Netbeans for PHP 7.1.2 (latest), on Windows 7 Home Premium 64-bit, with the plugin PHPCSMD to get access to CodeSniffer (I have the PEAR CS package installed in my PHP directory).
The ...
0
votes
0answers
636 views
Why is my ASUS P5SQL PRO is not detecting my OCZ Vertex II 60 gb SSD?
Why is my ASUS P5SQL PRO is not detecting my OCZ Vertex II SSD?
I've unplugged all drives. I've systematically moved the ssd to sata headers 1-6. The bios lists only "harddrive" in the boot device ...
0
votes
0answers
295 views
How to autoconfigure an Outlook 2010 mail account
Is there a way I could automate part of the mail account configuration in outlook as with thunderbird? (more info at https://developer.mozilla.org/en/Thunderbird/Autoconfiguration)
ex. Using an .xml ...
0
votes
0answers
87 views
Add more than one keyboard shortcut for an action in GNOME
How can I map additional shortcuts to an action, without losing the existing shortcuts for that action?
I have some computers running GNOME (some version 2, some version 3) with multiple keyboards ...
0
votes
0answers
72 views
Is there any software to visualise Apache HTTPd configuration?
I need to graphically represent Apache 2 HTTPd configuration. Is there any software or scripts that can do this for me?
Any suggestions would be appreciated. Thanks!
0
votes
0answers
252 views
Can I bypass the Cisco ASA portal?
Does anyone know how to bypass the Cisco ASA portal page (clientless SSL VPN), so I can access some internal machine directly from outside using a certain group policy? (or otherwise, be creative)
...
0
votes
0answers
89 views
What is the syntax of Apache's configuration files?
I'd like to know what the syntax of Apache's configuration files is. Particularly, quoting. Ive read this section:
http://httpd.apache.org/docs/2.2/configuring.html#syntax
And thought it left out a ...
0
votes
0answers
22 views
Retrieve only message bodies, or messages smaller than a given size, using fetchmail, getmail, etc
Using fetchmail, getmail, or other command-line MRAs, is there a way to retrieve only message bodies (without attachments) or only messages smaller than a given size? (This feature is available in ...
0
votes
0answers
44 views
How can I set up a Windows server so that the configuration for my clients is centralized?
What I would like to do is this:
At my office we have many machines with different hardware and we always have to fight against configuring each one for different printers.
Is there a way to have ...
0
votes
0answers
183 views
Metacity, put “roll up” back in context menu?
In Metacity, for a while, if you right-clicked a titlebar (or pressed alt-space), "Roll up" was one of the menuitems.
These days, it's gone, which is disappointing since it was the only thing in that ...
