1
vote
0answers
11 views

how to pick addresses and DNSMasq server for PPTP VPN client (in DD-WRT)?

I must be confused about terminology for addresses my remote network uses, but I could not get my DD-WRT (build 20548) connect to the PPTP server. At least I could not even verify that I am connected ...
0
votes
0answers
13 views

forward all client traffic on one network through a router on another network on a secure port

good day all after much research, and hastle, I have had no luck in finding a solution to this issue I have in mind to create a "VPN" for Windows clients: Forward all client traffic to a router on ...
0
votes
1answer
248 views

Setup a PPTP VPN on DDWRT Router

I have a internet connection with Static IP ,I want to setup a VPN for my Personal use and my setup is given below.I followed the instructions for setting up a pptp Vpn from here Intenet with static ...
1
vote
0answers
40 views

Linking router from VPN to main network?

So, here's what I have going on now: Thomson Cable Modem ---> WAN port on D-Link N600 (IP 192.168.0.1 - DHCP 192.168.0.100-149) running stock D-link Firmware ---> Wan port on Linksys E1200 (IP ...
0
votes
0answers
25 views

Moving Windows PPTP VPN to DD-WRT

How to move Windows PPTP VPN to DD-WRT. While I have set the VPN IP address under VPN Client in DD-WRT and also the username and password. Therefore, the MPPE Encryption in DD-WRT, I've set as mppe ...
0
votes
1answer
16 views

Connect ddwrt with Server via VPN

I have a Server in the Internet and an dd-wrt Router behind some Firewalls. I would like to have Access to the dd-wrt via the Server. The only way to accomplish this is to have a VPN connection from ...
0
votes
1answer
154 views

How can I configure my DD-WRT VPN PPTP server to assign netmask 255.255.255.0 to clients?

I have a router running DD-WRT with a PPTP Server working fine, but every PPTP client gets assigned IP like this one: IPv4 Address . . . . . . . . . . . . : 192.168.210.2 Subnet Mask . . . . . . . . ...
0
votes
0answers
171 views

How to configure a dd-wrt router between a cable modem and main router to run all clients through a VPN service?

Was told by a http://networkengineering.stackexchange.com moderator to post this here so hoping it's the right place... Currently I have a DD-WRT router with VPN capabilities. I have a Motorola ...
0
votes
0answers
68 views

OpenVPN DHCP server issue

I've worked through the tutorial listed at http://www.dd-wrt.com/wiki/index.php/VPN_(the_easy_way)_v24%2B. I have dd-wrt running on my router with the OpenVPN server daemon running. I'm running in ...
0
votes
0answers
95 views

How to route a single IP through a VPN in DD-WRT?

i've a 4 port router flashed with DD WRT 24sp2 connected to my default modem/router. My DD WRT IP: 192.168.1.1 My Gateway is: 192.168.1.254 EDIT: what i would like to do is to route only 1 IP ...
0
votes
0answers
154 views

Reliable Connection PPTP VPN to DD-WRT Router

I have set up a PPTP server connection so I can connect to a DD-WRT router remotely. I have set up the connection on my computer by using the "Connect to a Workplace" feature in Windows 8. I was ...
0
votes
0answers
113 views

How to connect a WiFi router to multiple networks simultaneously?

I am trying to find a solution that will allow my router to connect to four Wi-Fi networks at the same time. I and two neighbors each have mobile broadband Internet, we each use a simple router to ...
0
votes
0answers
257 views

VPN into Cisco/Linksys router

I just recently bought a Linksys EA6200 router and I would like to know if there is any VPN functionality built into the router. What I'd like to do: - Connect into a VPN network managed by my router ...
2
votes
0answers
138 views

Is PPTP VPN ever secure? Under DD-WRT? [closed]

PPTP is not an open, ratified standard the way that, for example, SSL/TLS is. (see: en.wikipedia.org/wiki/Transport_Layer_Security#TLS_1.2 and http://datatracker.ietf.org/doc/rfc5246/ ) The most ...
0
votes
1answer
380 views

How do I do remote logging on DD-WRT with rDNS?

Here's what I want to do: I plan on setting up VPN on the router so that I can change the router settings remotely: http://www.howtogeek.com/51772/how-to-setup-a-vpn-server-using-a-dd-wrt-router/ ...
0
votes
1answer
84 views

Is it possible to quickly and easily toggle VPN off and on at router level?

Through DD-WRT or something similar, is it possible to toggle off and on a connection to a VPN? Would a script sat on a machine within the home network do the trick? The intention is to get a ...
0
votes
2answers
884 views

Issue with PPTP VPN setup

My first intention to setup a PPTP VPN, via my Linksys E2000 router with DD-WRT firmware, was to use an iPhone app while being connected to my home network from anywhere I have an internet connection. ...
1
vote
1answer
119 views

Connecting to local machines through OpenVPN

I've now done quite some research on this topic and could not come up with a viable solution so far. There have been many questions, most of them not quite matching my issue, and only few answers. So, ...
2
votes
0answers
94 views

Can i tunnel a specific sites to a VPN Connection using DD-WRT?

I am thinking of setting up a DD-WRT router at home. Something that would help make my decision is to be able to tunnel specific sites/ip requests via VPN. For example, my son loves some shows on ...
0
votes
1answer
52 views

2 Subnets see each other

I have 2 routers that need to be on different subnets. The reason is that router 1 is connected to the internet outside the US where I live. Router 2 is behind router 1 and has a VPN server ...
0
votes
0answers
250 views

DD-WRT home VPN setup..help needed

I currently have 2 routers. Router 1 is my primary gateway. It is actiontec wifi router that I got from frontier communications. (192.168.1.1) Router 2 is a Netgear N600 Dual Band, DD-WRT based ...
0
votes
1answer
240 views

DD-WRT: Tunnel repeated/bridged traffic

In my neighborhood free, public WLAN (without encryption) is available. To avoid that sniffers can see/use my traffic, I'd like to configure my DD-WRT router to build an encrypted WiFi network. All ...
3
votes
0answers
1k views

How do I configure DD-WRT to forward IPSec traffic to an internal server to support a road warrior configuration?

I use dd-wrt as my home router setup and that's been working fine. Now I wanted to figure out a way to be able to use my iPad to set up a IPSec tunnel to my home network while I'm on the road. PPTP ...
2
votes
0answers
2k views

OpenVPN server certificate configuration instructions for DD-WRT router do not match user interface

I'm setting up the OpenVPN server daemon on a Buffalo N600 router which came stock with DD-WRT v.24 SP2. I'm following the instructions at VPN (The Easy Way) V24+ to set up the server side of things ...
1
vote
0answers
283 views

barebones features for a DD-WRT router acting as PPTP server

I have a little router (Linksys E900) only to act as a VPN server. I have a decent router behind it, handling radio anyway. So I am happy to relegate any other CPU-intensive stuff to the bigger ...
0
votes
0answers
358 views

how to troubleshoot asymmetric speed PPTP VPN speed? (downlink to client is slow, the server bandwidth up, and there is no encryption overhead)

I hope I have a general question motivated by my specific problem: I have acceptable upload speeds and unacceptable download speeds on my VPN while I think both endpoints have quite some bandwidth in ...
1
vote
1answer
473 views

is PPTP VPN server supposed to work in DD-WRT 19342 (or later) big build? with a mac OS 10.8.2 client?

Following up on some confusing comments in the DD-WRT forums, see http://www.dd-wrt.com/phpBB2/viewtopic.php?t=167815 (with a screenshot of settings) In the model-specific thread I learnt that my VPN ...
1
vote
1answer
295 views

Can DD-WRT create two WIFI ssid's one that routes through a VPN and the other that does not?

I am living in China and need a VPN to access youtube, facebook etc. However it is considerably slower to access local sites through a VPN. I am thinking to buy a router that will allow me to simply ...
2
votes
0answers
569 views

DD-WRT: Repeater bridge with VPN?

Setup: Router1 and Router2 run DD-WRT Cable modem is connected to WLAN port of Router1 Router2 runs in Repeater Bridge mode (there is also a separate SSID with virtual interface) This setup works ...
-1
votes
1answer
788 views

DD-WRT As an access point for VPN? [closed]

I want to set up a home VPN, and I had planned to use DD-WRT to do it. The problem is that our current router isn't supported by DD-WRT. Our previous router is supported by DD-WRT, and I have already ...
0
votes
1answer
556 views

Connect via VPN with DD-WRT

I'm considering getting a Router that is supported in the DD-WRT database. Before I do that I would like to know, would it be possible to make the router connect to a VPN on the router level (so all ...
0
votes
1answer
774 views

Connect to my LAN from outside my router (WAN)?

Time for some extremely rough ASCII art. |------| /LAN_B ME ->|ROUTER|->LAN_A-> -LAN_C |------| \LAN_D LAN_A is a server with the necessary exposed port(s) to ...
1
vote
1answer
282 views

Failover WAN with multipath

I'm configuring a dd-wrt router to allow access via VPN to a remote desktop server. The router will sit behind another router providing NAT. I'm configuring it with a backup 3G mobile broadband link. ...
1
vote
3answers
1k views

DD-WRT - VPN tunnel with access restrictions

I want to allow users to connect to my home network through my DD-WRT router using a VPN tunnel. I want the users to be able to access a specific IP on my local network freely (10.10.10.5). I dont ...
2
votes
0answers
919 views

How to setup “all traffic” VPN on Linksys WRT54GL (DD-WRT) through Thomson ADSL Router

[Apols if I get terminology wrong...n00b to this!] I have a (pretty unconfigurable) ISP provided Thomson ADSL router - ISP runs PPPoE. I added to this a Linksys WRT54GL router which I want to keep ...
1
vote
1answer
940 views

Wrap a PPTP/L2TP/OpenVPN VPN server that forwards everything through an SSH Tunnel

Using say: ssh -D8080 user@remoteserver.com to create an SSH tunnel to a remote server and use it as a SOCKS proxy, etc., how would one go about to wrap it into a VPN server (PPTP, L2TP or OpenVPN), ...
1
vote
2answers
1k views

how to access computers on dd-wrt LAN using hostnames, when connected to a university VPN?

So I have a dd-wrt router connected to my cable modem. Behind that router on my lan are computers with hostnames le1700, wind and t60p. On each machine, I am simply able to do a nslookup and it ...
2
votes
4answers
10k views

Persistent routes for DD-WRT PPTP VPN client

My home network in the USA is behind a Buffalo router (G300NH) running their version of DD-WRT. I use the built-in PPTP VPN client to connect to a VPN provider in the UK. I route certain traffic over ...