DD-WRT is a Linux based open source firmware for wireless routers and embedded systems.

learn more… | top users | synonyms (1)

0
votes
1answer
231 views

How do I route traffic of one IP net to a different router using DD-WRT

I am running DD-WRT v3.0-r28211 std (11/16/15) on a router behind my actual internet router (which is a Fritz!Box). The Set up is a follows: Internet router: 192.168.177.1 (Fritz). DD-WRT: 192.168....
0
votes
0answers
30 views

Adding custom QOS pattern files to DD-WRT?

I want to add a couple of URL based QOS rules to my Netgear X6 R8000. I know how to write the rules but /etc/l7-protocols is mounted write only. I have enabled JFFS2 and can write there. What I need ...
0
votes
1answer
61 views

How to Block all inbound and outbound traffic to and from an Local IP

I need to block entire traffic to and from an Local IP on an WiFi Network, I am using DD WRT Based router, So I Can use iptables. I know the IP Of an Client on the Local Network, Some thing like 192....
0
votes
2answers
77 views

How to Find Download/Upload Speeds of Devices on Network

I have a Linksys WRT54G V8. I have a problem where our internet is both slow and our ISP gives us very junky modems that will cause slow downs occasionally. Due to both of these problems, I need the ...
1
vote
1answer
137 views

Network settings in network of powerline adapters

My network consists of a modem which is connected to the router Buffalo WHR-HP-G54 (DD-WRT v24-sp2) where the signal is transmitted over the powerline adapters (D-Link DHP501-AV) to my Desktop PC (...
0
votes
0answers
220 views

Where is DD-WRT's HeartBeat Signal of WAN connection used?

The firmware is DD-WRT v24-sp2 (01/02/10) std-nokaid. Where is the HeartBeat option meant to be used for? The manual here of some Buffalo's routers: HeartBeat. Signal If you use a HeartBeat ...
0
votes
0answers
22 views

Belkin Router OpenWRT Custom iiNet Model

I am trying to install OpenWRT or DD-WRT on an old belkin ADSL/VoIP router/modem. But, because it is a custom model made for iiNet the model number isn't listed anywhere. I have opened up the case ...
2
votes
1answer
21 views

How to access dd-wrt bridge?

I have installed dd-wrt on my fonera some months ago, then I configured it as wireless bridge and forgot about it, never used it again for some time. Now I need it again in a different configuration, ...
1
vote
0answers
53 views

Wireless router hangs/reboots very often

I have a 5 year old TP-Link 1043ND v1 wireless router running the following DD-WRT firmware: DD-WRT v24-sp2 (12/22/14) std (SVN revision 25697) I haven't made any FW modifications in the last ...
-1
votes
1answer
124 views

How to speed up dd-wrt iptables command execution

I have a custom firewall script in dd-wrt router. It has thousands of lines in a user-chain like this: /usr/sbin/iptables -t nat -A XXXX -d 1.2.32.0/19 -j RETURN /usr/sbin/iptables -t nat -A XXXX -d ...
0
votes
0answers
86 views

How to remotely reboot a DD-WRT-based router without admin access?

I have a TP-Link 1043ND (v1) router with DD-WRT configured as a VPN client, which connects to our main office from another city. Recently it started to drop connection from time to time, and ...
0
votes
1answer
57 views

Error in the rsyslog.conf file, how to log more than one device?

I am trying to log my dd-wrt router and my nas4free device. All logs are sent to a spare raspberrypi with a usb disk connected to to store the log files. But there is a problem with my rsyslog.conf ...
2
votes
2answers
55 views

Using an old router as a Wifi receiver appears to cause network disruption

I'm currently using an old router that I flashed with DD-WRT a few years ago, and set it up to act as a wireless receiver. I got it working and connected to the WiFi network, so that when you connect ...
1
vote
1answer
226 views

DD-WRT OpenVPN won't connect from remote location

I have DD-WRT v24-sp2 (12/22/14) std on my TPLink 3600 and I have configured my OpenVPN server. When I try to connect to my LAN, it works, but it is invisible from the internet. Certificates are not ...
0
votes
0answers
37 views

DD-WRT: Guess available space on my JFFS partition

I am testing DD-WRT, and I have discovered that there is some available non-volatile space for storage named JFFS at /jffs. This if fine, but the amount of available space info is not at the df ...
-1
votes
1answer
266 views

No internet access on TP-LINK TL-WR841ND with DD-WRT

I'd really appreciate if you could help me out. I have no internet access on my TP-LINK TL-WR841ND v7 with DD-WRT. I installed it today and it worked flawlessly with the original tp-link firmware. I ...
0
votes
1answer
243 views

DD-WRT Force New WAN IP Address

Is there a way to force a new WAN IP Address with DD-WRT? I know there was a way before that would require temporarily setting a new Local IP or Modifying the WAN but I do not remember.
2
votes
1answer
67 views

How to expose dd-wrt localhost port to other clients on LAN?

On my mac computer at work behind a corporate firewall, I ssh into my home dd-wrt router over the internet, creating a reverse tunnel: ssh -R 1079:localhost:22 myhomepc.ddns.net So now, when I'm ...
0
votes
0answers
182 views

dnsmasq: Redirect all urls * except* one

I have the following situation: Inside my LAN, I want to redirect all traffic going to http://*.mydomain.com to one of my internal servers (10.0.0.17). The only exception is http://mail.mydomain.com,...
0
votes
0answers
25 views

Can't connect to websites that have obsolete or no certificates, DD-WRT

I have a TP-Link router in which I installed DD-WRT. To use it with my ISP's router, I connect things like this: The problem is that, even though I am able to access the internet and search in ...
0
votes
1answer
55 views

asus rt-n16 weird thing - turns itself off (from time to time)

until now everything worked ok long time, but I started to have weird problem. My specification: asus rt-n16, DD-WRT v24-sp2 (07/24/13) mega - build 22118 In the last week my router stopped working,...
0
votes
2answers
94 views

can anyone explain this completely random local IP address that appears on my network?

I have a DD-WRT router, and I am connected to a VPN. My routers local IP is 192.168.11.1. The VPN uses local address 10.10.0.6. However there is this strange IP address 10.16.128.1 that is always ...
1
vote
1answer
143 views

OpenVPN Routing Port 80 Traffic only DD-WRT

I've setup openvpn client on my dd-wrt to connect to a host a couple states away. Works great(checked route table as well) but I want to only tunnel http traffic. I've always used IPtables for my dd-...
0
votes
0answers
80 views

How do I make my dd-wrt router obtain a WAN IPv6?

My ISP, Andrew & Arnold, provides IPv6 natively. I'm using dd-wrt in my router. How do I make it obtain the WAN IPv6 and distribute it to computers in my network?
0
votes
0answers
56 views

How to remotely set up IP cameras?

I'm trying to set up a CCTV system at my parents' house. Most of the networking is done already (I think), but I still need to set up most of the ~30 cameras. This is the network topology: internet &...
0
votes
1answer
129 views

No Accounting packets from DD-WRT router running WPA2-Enterprise and RADIUS server in WAN

I am running a TP-LINK WR740N router with DD-WRT. I have successfully set up WPA2-Enterprise which relies on a freeRADIUS v2.2 server in WAN. Authentication goes well. But DD-WRT just sends ACCT ...
0
votes
0answers
56 views

DD-WRT QoS: MAC Priority over Interface Priority

This setting doesn't appear to work: Interface Priority ath0 Maximum MAC Priority AA:BB:CC:DD:EE:FF Bulk Note: AA:BB:CC:DD:EE:FF is connected via ath0 AFIAK, MAC priority will take over, ...
1
vote
0answers
31 views

Configure router to send a request everytime IP changes

I have a Linksys WRT54GL with dd-wrt installed, and Linksys WAG200G with OpenWAG. I want to send a wget request to a specific server that will automatically update my ip in their records, every-time ...
1
vote
1answer
152 views

Port Forwarding on a dd-wrt Router

I want to be able to forward port 5678. Here's my equipment and details: Modem: ARRIS SURFboard SB6121 DOCSIS 3.0 Cable Modem Router: Cisco Linksys E2000 DD-WRT v24-sp2 OS: Windows 10 ISP: Cox ...
1
vote
1answer
851 views

Flashing TP-Link TL-WR1043ND ver 2.x with DD-WRT

I noticed that after buying the device, there exists only binaries for 1.x. I did not find any successful attempt about installing binaries of 1.x to the device 2.x. The precise name of my device is ...
1
vote
0answers
128 views

Setting up RTMP for streaming (Console)

So I have been trying to set this up for the past few days and I am having so much trouble actually getting this to work. I have installed Nginx with the optional RTMP module onto my Mac and I also ...
0
votes
0answers
55 views

is it possible to spoof the model of a router so it appears as something else in mobile network?

Hello, i have a Huawei router which connects by 4G to the phone company that i use, it supports many bands 1800\2300\2600. The problem i have is that the phone company recently restricted the router ...
1
vote
1answer
455 views

DD-WRT admin page redirects to 192.168.11.1 after changing its IP

I'm running three DD-WRT routers. One acts as the external gateway and does NAT and DHCP, and the two others are connected via Ethernet and act as wifi bridges (via these instructions). It works great!...
0
votes
1answer
56 views

Is it possible to connect a wired network to two separate wireless networks via a client based bridge?

I have two new robots in our lab and I’m trying to figure out the best way to connect them to our existing network. Basically, the problem is as follows: Both robots are running EdiMax wireless ...
0
votes
2answers
324 views

DD WRT in Repeater mode but no DHCP?

I have DD WRT on my landlords router and its set up to be a repeater, it gets its WIFI from their house (I do not have access to the main network, just the WiFi that DD WRT thing gives me), the ...
0
votes
1answer
232 views

How do I make DD-WRT re-use static leases for wifi clients?

I am trying to configure static leases for DD-WRT, so that my phone gets the same IP address every time it connects via wifi. I have set up a static lease under Services/Services/Static Leases. This ...
0
votes
1answer
207 views

DD-WRT calling web service from Arduino ESP8266

I am looking for a way of finding out what devices are currently attached wirelessly to the router thats running DD-WRT firmware. Problem is that I am unable to find any references to a REST API or ...
0
votes
0answers
41 views

My nas Linkstation 420 keeps dropping from network

I have a problem with my nas Linkstation 420 4 tb. My nas keeps dropping off my network, I installed it a couple of days ago (a used one) and haven’t got it working, I can be on the web admin site and ...
0
votes
1answer
63 views

Pooling 2 internet connections

I am looking for ways to pool 2 or more connections. The "basic need" is to use the best connection if one is slow, or not really reaching the Internet, but more sophisticated combinations are of ...
0
votes
0answers
75 views

View traffic volume in home network (dd-wrt)

I have a homenetwork with a dd-wrt router. How can I get a good overview of the traffic towards Internet (Better than the dd-wrt screens) over different periods, by device and in total. Need to be ...
1
vote
3answers
559 views

How to create a subnet between two different networks

I need some help to build my first subnet between two routers. My office is located near another office, and those two offices are linked together with a network cable, and both offices have ...
2
votes
1answer
3k views

How can I disable WPS on DD-WRT?

I have a Buffalo AirStation router with DD-WRT installed. My version is Firmware: DD-WRT v24SP2-EU-US (08/19/10) std (latest as for today on my device), but I think this question is basically the ...
1
vote
0answers
354 views

Network Setup + Hotspot with redirect to webpage

What I have I have (ROUTER 2)TP-LINK WR841ND with DD wrt latest version with sputnik hotspot enabled (Access Point) 2.4GHz 300Mbps 9dBi Outdoor CPE CPE210 My friend with internet also have a (...
1
vote
0answers
109 views

Trying to set up 2nd router on home network running TorGuard VPN

I'm trying to set up a second router on my home network to use a VPN (TorGuard) to provide a network connection that is apparently in another country. My main router, connected to my ISP, is ...
0
votes
0answers
59 views

Iptables in DD-WRT

I have a WRT54GL router with DD-WRT connected to (in the same VLAN): IP radio with very low bandwith (192.168.1.107) Arduino with Ethernet Shield sending UDP messages (192.168.1.110) Another router ...
0
votes
1answer
377 views

How to bridge 802.1X ethernet to wireless?

Problem: My high level goal is to have a device which would be connected to an 802.1X network over Ethernet and would act as a wireless router, offering WPA2-PSK wireless access to the wireless ...
0
votes
0answers
55 views

IP filter with DD-WRT

I have a Linksys WRT54G, in which I want to install DD-WRT. first of all, I explain what I want to do, starting with my network architecture: We have the Linksys WRT54G without Internet connection. ...
0
votes
1answer
47 views

Can I route all connections on my router through a VPN?

I have a Cisco Linksys e1200v2 with DD-WRT v24sp2 mega. I would like to have all connections go through the OpenVPN server that I already have configured. I have noticed the Open VPN Server and Open ...
1
vote
0answers
79 views

Port Forwarding with OpenVPN active on DD-WRT

At home, I have two networks, my home network, then a second network separated by a DD-WRT router, which I call my homework network. This homework network can be treated as a separate network to my ...
1
vote
1answer
249 views

DD-WRT setting to deny communication between wired clients

I've been having trouble connecting between wired devices on my LAN since I switched to a DD-WRT based router (Windows 8.1 cannot connect to one specific device on LAN). My wireless devices can ...