DD-WRT is a Linux based open source firmware for wireless routers and embedded systems

learn more… | top users | synonyms (1)

0
votes
1answer
144 views

Why are only some hosts resolved using DNS?

I have a DD-WRT router configured with DNSmasq. The config is local=/myhome.local/ expand-hosts addn-hosts=/jffs/hosts.dnsmasq This way I can resolve network hosts (e.g. ping macbookair), but other ...
1
vote
0answers
395 views

No channel 13 after ddwrt firmware

I flashed my TP-Link 1043ND to dd-wrt, and the channels 12 and 13 disappeared from the settings. I am in Europe so they are legal. The dd-wrt version is v24SP2 build 21061. How do I get them back?
1
vote
0answers
500 views

Using a WRT54G V8 as a repeater and print server?

I currently have an old WRT54G V8 setup with my printer (HP Laserjet 400M 401DN) to broadcast it's own wireless network (no internet, just printer). The printer works wirelessly with this setup but I ...
2
votes
0answers
491 views

How do I set up wireless radio time restriction in DD-WRT build 21061?

I upgraded to D-WRT specifically to get the ability to restrict wireless access on a schedule. I'm using a Netgear WNDR3700, and the install went flawlessly (as far as I can determine), but there is ...
1
vote
2answers
875 views

DD-WRT: Cannot see client when using wired ethernet

A bit of a frustrating problem I've been facing - I just don't know what's wrong. I have a Netgear WNR2000v3 router with DD-WRT v24-sp2 (03/19/12) std installed. Everything works perfectly apart from ...
2
votes
0answers
104 views

Can i tunnel a specific sites to a VPN Connection using DD-WRT?

I am thinking of setting up a DD-WRT router at home. Something that would help make my decision is to be able to tunnel specific sites/ip requests via VPN. For example, my son loves some shows on ...
1
vote
1answer
2k views

Dualband Routers with the same SSID? [duplicate]

I have recently purchased two Buffalo AirStation N600 Dualband routers and have set one up to be the main router and the other as a wireless access point. Both are running open source DD-WRT firmware ...
0
votes
0answers
486 views

Can not log into DD-WRT web GUI (but ssh!) after openVPN changes

I am running the vpn version of DD-WRT on my Linksys WRT54G. All worked great until I went into the web GUI and changed an IP address within the VPN settings. After I clicked Apply Settings I wasn't ...
0
votes
1answer
297 views

Home Router (DD-WRT) and using DMASQ for a host via dynamically assigned via DHCP

I have a home Home Router (DD-WRT) and I want to be able to look up machines via hostname. However, I would like to do this with machines where the IP Address id dynamically given via DHCP. Example ...
2
votes
2answers
1k views

Static IP on DDWRT firmware

I have a range of 8 static public IP's given to me by BT and I've recently upgraded my BT business hub to a Buffalo Airstation running DDWRT. So far I've setup the router to obtain a dynamic IP, ...
0
votes
0answers
2k views

Unable to get DD-WRT router set up as a Client Bridge to access the internet

I have a couple of network security cameras that use PoE and I would like to use them outdoors. The problem is that I do not have network ports anywhere outside, so the solution I came up with was to ...
1
vote
2answers
1k views

Routers will not cascade

I'm attempting to cascade two routers to extend my wireless network, using a Linksys E1200 as a master and a Linksys E1500 as a slave. The E1200 is running the stock firmware but the E1500 is running ...
2
votes
2answers
3k views

DD-WRT and Chromecast: default WLAN to LAN bridge blocks UDP?

I have DD-WRT running in gateway mode on a DIR-615 I1. I've updated to the newest available build. Chromecast is a wireless-only device, for those unfamiliar. The device has been set up and ...
2
votes
1answer
2k views

Internet speed with DD-WRT repeater bridge

I'm using a TP-Link WR740N router flashed with DD-WRT as a wi-fi repeater. However, in divisions where the signal from the main router is weaker than the signal from the repeater, the Internet speed ...
0
votes
0answers
45 views

Monitor web traffic from wireless clients on home network [duplicate]

I would like to monitor web traffic on my home network from wireless or other clients (PC or Mac) to see what URLs are accessed. I have a Buffalo AirStation router with the Buffalo-branded DD-WRT ...
0
votes
1answer
128 views

Trying to setup complex router configuration

I have an Asus RT-AC66U that I'm trying to use to satisfy a set of four rules: 1-allow wired clients to access the internet 2-allow wireless clients to access wired clients (via tcp and udp) 3-DO NOT ...
1
vote
2answers
2k views

How do I fully reset DD-WRT?

I have a Linksys WRT54GS wireless router flashed with DD-WRT, and I forgot my username and password for it. Thus, I am unable to reset the password from the web interface. Without access to the web ...
1
vote
0answers
257 views

How to set the daily quota and bandwidth control for all IP in DDWRT

What I want to do with my DDWRT router is, I need to set the bandwidth control limit for all IP address to 1024kbps internet speed. Also I need to set the usage permission to 2GB quota per day, once ...
1
vote
1answer
663 views

OpenVPN doesn't resolve names when using a router

I'm using OpenVPN client (TCP TUN) on an Ubuntu box. For some reason, it stopped resolving names when I'm connected through my dd-wrt router. It used to work just fine, and when connected directly, it ...
0
votes
2answers
2k views

Creating a virtual access point for guests with DD-WRT?

I am attempting to setup two wireless access points (APs) with the following characteristics: all of my devices will connect to the first AP guests will connect their devices to the second AP both ...
2
votes
2answers
4k views

Slow wireless in my room: should I get a faster router or multiple extenders?

I recently moved into a new house and have very poor wireless in my room. I currently keep my wireless router (Linksys E1000 with DD-WRT) in the living room as this is where most of our browsing takes ...
0
votes
1answer
1k views

Forward to Internal IP and Port From a Single IP Address on DDWRT Router

I'm trying to follow this guide and I have a simple request that I haven't been able to solve. I'd like to only accept requests from a specific IP address to a host within my internal network at home. ...
0
votes
2answers
308 views

DDWRT Port Forwarding Request from Dynamic IP

I'm running a DDWRT router with a NAS behind it. The NAS runs a service called Cloud Station. I'd like to restrict access to Cloud Station to a handful of hosts (family members). Each family member ...
0
votes
1answer
2k views

Linksys WRT54GS - where to get old firmware v4.70.6

I've just bought a second-hand Linksys WRT54GS (v4) with intention to put DD-WRT on it. Unfortunately, I have problem with software currently running on this device. It has Sputnik based on firmware ...
0
votes
1answer
80 views

Can a Draft N router be upgraded to a Final N router with a firmware update?

For instance, the ASUS (RT-N16) says "IEEE802.11n Draft" and can run DD-WRT. Can a firmware upgrade convert it to IEEE802.11n Final, or does that require hardware changes? If you are purchasing a ...
1
vote
0answers
258 views

Can't connect to some web hosting FTPs after installing DD-WRT on my router

I have recently installed DD-WRT on my D-Link DIR-615 router. Everything seems fine but I cannot connect to some FTP servers (web hosting) anymore. Any ideas what can cause this issue? CuteFTP is ...
1
vote
0answers
73 views

Is there a fax daemon I can install on a remote machine and use over the internet?

Here's the situation: As a poor student I currently don't have a phone line and so obviously no fax capabilities. However my parents have a phone line and a fax machine (One of those HP combo machines ...
0
votes
1answer
891 views

Multiple Subnets Routed Through Separate Network Interfaces Assigned Static Public IP's Going Through a Single WAN Connection

Question moved and completely re-written here. I have a block of Static IP's from my ISP and I am looking to setup separate network interfaces inside DD-WRT that all go through the single WAN ...
0
votes
2answers
1k views

Using a WRT54G to provide wireless capability to an existing wired network

We have an existing 100Mbit wired network. All the PC's are WinXP. The internet comes in via a wireless modem that connects to a one of the workstation via USB. So this W/S runs with a fixed IP ...
1
vote
1answer
4k views

Running a DHCP Server on DD-WRT in “Repeater Bridge” mode?

I am currently running a Linksys WRT160N router on DD-WRT set up as a "Repeater Bridge". It currently serves to rebroadcast my Virgin Mobile MiFi's WiFi through this router, hence broadcasting a more ...
0
votes
1answer
101 views

bridging two wireless interfaces - possible?

What I am trying to do is simple. create a bridge => br0 add first Wi-Fi nic => wlan0 add second Wi-Fi nic => wlan1 so I end up with br0 = wlan0+wlan1. Yet, I always get this error msg: ...
0
votes
0answers
872 views

No internet connection, DNS error. Have dd-wrt, att DSL, WRT54GS

My internet just stopped working a few days ago. The wired connection is fine. When I connect to the router I can no longer connnect wired or wirelessly. I upgraded my router (Linksys WRT54GS) to ...
3
votes
3answers
512 views

Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect ...
0
votes
1answer
199 views

Connecting to Windows 8 Cygwin SSH through DD-WRT from WAN?

I'd like to connect from my work to my home PC/Laptop through Cygwin's SSHD. I have DD-WRT installed on my router and i'm not really sure on how to configure it to allow me to get in. It works nicely ...
1
vote
2answers
2k views

can't access my ip from outside

I've just installed DD-WRT (DD-WRT v24-sp2 build 21676) into my TP-Link (TL-WR1043ND) router. I've setup port forwarding for port 80 to my machine port 80 and it works well under LAN access (checked ...
0
votes
0answers
159 views

Weird packet dropping between two routers

My ISP provided me a hybrid DSL modem/router with a phone jack and 4 LAN ports. The DSL modem/router supports PPPoE passthrough, but it does not do PPPoE dialing. I also have a more powerful DD-WRT ...
0
votes
1answer
3k views

Cannot Access Web GUI after changing to Router mode DD-WRT

I have a wireless router running DD-WRT (the latest version) and I set it up to be a Repeater Bridge to function as a second router, which means I had to change the Local IP Address and change the ...
0
votes
1answer
68 views

2 Subnets see each other

I have 2 routers that need to be on different subnets. The reason is that router 1 is connected to the internet outside the US where I live. Router 2 is behind router 1 and has a VPN server ...
1
vote
1answer
4k views

How can I tell DD-WRT DHCP to assign same IP to the same device?

I installed DD-WRT mini image on my router. I have a board that gets rebooted a lot(development device). It is very frustrating that my board keeps getting different addresses every couple of reboots. ...
0
votes
1answer
100 views

How do I remove dd-wrt from a DIR-400 router?

I made the mistake of doing a 30/30/30 on my Dlink DIR400 and now when I access it from my browser it comes up with a page asking me for the file I want to update it with. However, none of the files I ...
0
votes
1answer
253 views

DD-WRT, virtual hostname forwarding to other names/IP's using round robin

I'm using DD-WRT v24/K2.6 on Netgear WNDR3400. On my home network I have many machines running (I do lots of distributed programming). I want to create a virtual hostname, say publisher, such that any ...
1
vote
1answer
290 views

connection timed out after ddwrt install

I got a new 1043, v1.10, downgraded it to the german firmware. It was working fine. Than I tried to upgrade with factory-to-ddwrt.bin, build 21061. Now I get an error when I try to reach 192.168.1.1: ...
0
votes
0answers
291 views

DD-WRT home VPN setup..help needed

I currently have 2 routers. Router 1 is my primary gateway. It is actiontec wifi router that I got from frontier communications. (192.168.1.1) Router 2 is a Netgear N600 Dual Band, DD-WRT based ...
1
vote
2answers
710 views

Setting up a reverse proxy on DD-WRT

I have a dynamic IP updater set up on my router, and I want to be able to connect to a computer for remote desktop. I want to be able to connect to a computer on my network with ...
0
votes
1answer
1k views

bridging DD-WRT leads to un-routable ip addresses

I'm bridging two routers. The primary (attached to the internet) is a stock Linksys WRV200 running Firmware Version: 1.0.39. The secondary is a Linksys WRT-54g running Firmware: DD-WRT v24-sp2 ...
0
votes
1answer
1k views

How do I find out if my router is compatible with DD-WRT when it's not in their list?

I'm considering flashing the firmware on my router to DD-WRT this weekend. I tried to find my router (Medialink - MWN-WAPR150N) in their router database with no luck. I'm wondering what key things ...
0
votes
2answers
2k views

VNC Port Forwarding with DD-WRT

I am having issues with accessing my PC via VNC externally. I have read various documentation and forums with people having the same problem, but am still stuck. I am able to log in to my VNC ...
3
votes
1answer
1k views

WiFi speeds half of wired speed

I just upgraded my Comcast internet, and my wired speeds vary from 58 Mbps to 70 Mbps (per speedtest.net). I have a WRT610N router, and I'm only getting around 20-25 mbps from the wifi. Things I ...
2
votes
0answers
293 views

sshuttle on a DD-WRT / OpenWRT Router

Has anybody had any success installing and running sshuttle on a wireless router? My intent is to have all traffic from all devices (computer, tablet, gaming system, etc.) that connect to the router ...
0
votes
1answer
226 views

Access Dynamic Domain Name Via WAN, and while on network

Router Running DD-WRT v24 DNSMasq is enabled DynDNS is enabled, routing TLD domain devita.co to my Dynamic IP Port Fowarding rules enabled for 192.168.1.161, WAN 2152 -> LAN 80 External ...