DD-WRT is a Linux based open source firmware for wireless routers and embedded systems

learn more… | top users | synonyms (1)

0
votes
0answers
10 views

Wireless router in “Client Bridge Mode” with roaming capabilities

Scenario: We are looking for a device which can connect wirelessly to a network and supports both NAT & Port-Forwarding AND is able to roam seamlessly between different APs. So far we have ...
0
votes
0answers
14 views

How to locate and add hostnames on LAN managed by DNSMasq on DD-WRT

I am running DNSMasq as both my DHCP and DNS server on my DD-WRT router. I had thought that DNSMasq was adding hosts that it registered in DHCP to the DNS server automatically, but I have a few ...
0
votes
0answers
9 views

Remote SSH access doesn't work when OpenVPN client is enabled on DD-WRT

I have a DD-WRT router which I would like access remotely via SSH. The DD-WRT is behind an ADSL router which has port forwarding for port 22 enabled, DD-WRT SSH access and service are set to port 22, ...
0
votes
2answers
22k views

ASUS RT-AC66R hard reset

Have an ASUS RT-AC66R - we had set it up for our church and was working flawlessly. I was approached last sunday to say it was not connecting (2014-01-19). We had set it with the 2.5 and 5 Ghz ...
0
votes
0answers
13 views

How to fix unreliable wireless with DD-WRT

I have a Netgear WNDR4500 running DD-WRT. I have a couple desktops wired to it, which have never had any networking problems associated with the router. I also have 2.4GHz Wi-Fi with AES encryption ...
0
votes
0answers
10 views

Configuring iptables for guest WLAN in DD-WRT

I'm constantly failing to get a guest WLAN in DD-WRT working. I can connect to the second SSID and get an IP address of the second DHCP server range. But I cannot connect to the internet. I followed ...
0
votes
1answer
2k views

Blocked a website in DD-WRT but it doesn't block all its subdomains, is there a way?

I blocked a site (http://exampleurl.com/) in DD-RWRT's control panel and it worked, but just for that exact URL, it didn't block the entire website (http://exampleurl.com/stuff/etc) and all other ...
0
votes
1answer
205 views

Bridged VLAN and VAC can't connect to the internet on DD-WRT

I just recieved my new Netgear Nighthawk AC router, and I installed the latest DD-WRT from myopenrouter.com (build 23720). I am trying to create a VLAN bridged with a Virtual Access Point (VAC) so ...
0
votes
0answers
49 views

Ping to bridge primary router is timing out

I have an Linksys E900 configured as a bridge. Basically it is connected wirelessly with my main Linksys router. I am using a direct ethernet connection from the Linksys E900 to an old PC that doesnt ...
0
votes
0answers
19 views

Can't flash openwrt kernel on Mikrotik Routerboard 750

Im trying to flash OpenWRT onto Mikrotik RouterBOARD 750 and Im having some difficulties when trying to flash kernel. Im running OpenWrt form RAM right now. Even though, I erased kernel beforehand, ...
3
votes
2answers
4k views

DD-WRT and Chromecast: default WLAN to LAN bridge blocks UDP?

I have DD-WRT running in gateway mode on a DIR-615 I1. I've updated to the newest available build. Chromecast is a wireless-only device, for those unfamiliar. The device has been set up and ...
2
votes
1answer
3k views

DD-WRT firewall rule configuration

I'm using DD-WRT on my linksys router. I want to limit each user on my network to 200 connections at any given time. Does anyone know the rules I enter the firewall in DD-WRT admit panel. I tried ...
0
votes
0answers
32 views

DD-WRT OpenVPN access DNS not resolving hostnames [on hold]

I would like to achieve VPN access to my home router running on DD-WRT, so everything will go through VPN and I will access hosts on my home network. The problem is that my local DNS is not resolving ...
1
vote
0answers
15 views

How to set up router to always redirect users to a website?

I'm trying to set up a Linksys E2500 to only allow access to two webpages. Both pages are on the same domain (e.g. www.foo.com and blog.foo.com). I've flashed my router with DD-WRT firmware for ...
0
votes
0answers
20 views

Router keeps resetting itself and kicks off all users

I have a Dlink-DIR-632A router that is running DD-WRT v24-sp2 and ever since I got the linksys WUSB6300 AC1200 USB 3.0 wireless adapter it has been randomly resetting and kicking off all users for ...
1
vote
3answers
22k views

How do I revert back to official Linksys firmware from dd-wrt on WRT56G2 v1?

I've been having trouble with dd-wrt on my Linksys WRT56G2 v1 router and want to go back to the stock Linksys firmware for it. The router has only 2MB of flash memory, and so I'm running the 'micro' ...
0
votes
4answers
7k views

Freshly installed dd-wrt on dir-300 and no internet. What to do?

With the d-link firmware I just connected the router and it worked, as is expected when using DHCP, but with dd-wrt I have no internet access. It is configured with DHCP, and dd-wrt's wan status page ...
0
votes
0answers
24 views

Create virtual WAN interfaces in DD-WRT

Is it possible to create virtual WAN interfaces with different MAC Addresses in DD-WRT? This way it would be seen by the WAN Network as different devices connected to a switch. What I'm trying to ...
0
votes
1answer
20 views

Does quality of service (QoS) reduce the bandwidth that is available to “bulk” traffic?

If I enable quality of service (QoS) on my DD-WRT router, if there is no "preferred" traffic over the connection at a given time, will the “bulk” traffic still be limited?
0
votes
1answer
16 views

QoS and ample bandwidth

Assuming I never exceed the bandwidth of my connection to the internet, will enabling and configuring QoS on my router have any positive affect? I'm under the impression that QoS only helps ...
0
votes
1answer
117 views

DD-WRT print server is working on Linux, but not on Windows

So I flashed the latest DD-WRT on my router, but I can't for the love of God make printing working on Windows. It works seamlessly on Linux though, with the following settings. When I add the printer ...
1
vote
1answer
26 views

Port forwarding through dd wrt

I'm trying to do port forwarding to one of my local computers and I'm having some trouble with it. The forwarding from router 1 (R1) already works, but I can't get it to work on R2, at least not as it ...
0
votes
0answers
25 views

Issues setting up a VLAN on a DD-WRT router

I have been using dd-wrt around 8 months so I am still new, but I have been trying to set up ddwrt with unifi ap. The IT person before me implemented a mikrotik and im not so fond of it. I wanted to ...
0
votes
0answers
30 views

How can I troubleshoot high latency between my PC and my router?

My internet is provided by my landlord. Up until about a month ago, each apartment had a separate router and internet connection, and it worked fine. Recently, however, my landlord switched to a ...
-2
votes
1answer
46 views

What are the important hardware specifications to look for in a router? [closed]

Assuming that I purchase a home wireless router compatible with DD-WRT, I won't care about the feature set and the quality of the original firmware. I shall get everything that DD-WRT has to offer, ...
0
votes
0answers
11 views

IPTables NAT to webserver how to forward real remote IP

I have a simple setup where I host a webserver in my local LAN 172.16.0.0/27, port 80. It is connected to my DD-WRT router that has a publich IP (direct Internet connection), let's say 1.2.3.4. I set ...
0
votes
0answers
11 views

DD-WRT wireless bridge and proxy

Is it possible to setup DD-WRT as a wireless/ethernet bridge and in the same time add vpn proy on the link?
-1
votes
1answer
36 views

DD-WRT Wifidog - Redirect isn't working

I have flashed a ASUS AC-RT56U router with DD-WRT version V24-preSP 2201412-22-2014-r25697. Now I want to make it into a hotspot with wifidog TO PLACE IN A SMALL BUSINESS (FITNESS CENTRE) I have ...
0
votes
2answers
158 views

Port Forward inside Router (DD-WRT)

I have configured an SSH tunnel on my DD-WRT router using the default port 22. I would like to open another port on my router as a proxy port for SSH, say port 80, in case a firewall prevents me from ...
3
votes
3answers
3k views

No internet connection when connected via wi-fi, but fine via ethernet (DD-WRT)

I just bought a new router and installed DD-WRT on it. When I connect to the router via wi-fi, I cannot get an outside internet connection (and in fact, can not connect to the router admin interface ...
1
vote
0answers
21 views

Dlink DIR-300 pair as wireless bridge

Basic background: I have/had enough experience to flash and do all that is necessary to install rd-wrt and setup etc. I setup a wireless bridge a few years ago , 500 meters across the fields, from ...
0
votes
1answer
2k views

Back to original firmware on TP Link WR2543ND

I flashed firmware on my WR2543ND router according to these instructions. But my router no longer creates wifi, wired LAN cables don't work anymore and 95% of time I cannot even access that router on ...
0
votes
1answer
39 views

How to track traffic flows to each IP on home network?

first-timer here. I will try to explain this as clearly as possible, as I'm not an engineer or anything. My Router: ASUS RT-AC87U - DD-WRT firmware installed, SNMP enabled. Topology: I have two ...
3
votes
2answers
334 views

How can I tell my dd-wrt router to use someone's Amazon Affiliates link when I point my browser to amazon.com?

Here's what I'd like to do. Instead of a one-time donation to one of my favorite free tools (junecloud.com) I'd like to do what they suggest here and use their Amazon Affiliates link to do all my ...
1
vote
0answers
1k views

Why won't FreeRadius allow WPA2 Enterprise/PEAP Wi-Fi connections?

First a bit of background: I've been tinkering with this on and off for a few days and it's getting frustrating. I've got a NetGear r6300 loaded up with DD-WRT v24/SP2 Giga and I've configured SSH to ...
2
votes
1answer
51 views

Is there a way to block the Verizon tracking cookie using Privoxy?

I'm using Privoxy on a DD-WRT router to do ad blocking on my local network. Is there modification I can make to the Privoxy configuration to block the infamous Verizon tracking cookie?
0
votes
1answer
918 views

How to bring Internet to a DD-WRT router from another router?

I have a new Internet connection that came with a preconfigured modem-router. That works really well but it has only 2 ethernet port and no wireless. So I would like to connect my other router running ...
0
votes
1answer
4k views

Cannot Access Web GUI after changing to Router mode DD-WRT

I have a wireless router running DD-WRT (the latest version) and I set it up to be a Repeater Bridge to function as a second router, which means I had to change the Local IP Address and change the ...
0
votes
0answers
42 views

Setting DD-WRT router to use a proxy

I have a dd-wrt router connected on the network of my school and the computers connected on the router network must set the proxy of my school to access Internet. So I would like to set my router with ...
0
votes
0answers
11 views

can't see other mac workstation in Ethernet, ok in wifi

So, I upgraded router to latest dd-wrt firmware. Now, for some reason, can't see my macdesktop from my macbook if connected to Ethernet. Macbook has DHCP, mac desktop has DHCP with manual IP. I can ...
3
votes
3answers
23k views

How can I re-enable the web interface of a dd-wrt router with no SSH or telnet connection?

I accidentally disabled my D-link router's web interface. I installed dd-wrt firmware on it. The router's SSH and telnet connections are disabled. I don't want to reset the router. How can I enable ...
0
votes
1answer
81 views

Log Websites Visited With DDWRT

I have a netgear wndr4300 and have flashed ddwrt to it. Is it possible for me to do websites visited & by what computer name logging on this set-up?
0
votes
1answer
26 views

rsyslog seems to produce a lot of UDP port 53 datagrams when listening for ddwrt syslog packets

I am trying to have dd-wrt (syslogd via BusyBox) send syslog events to a Raspberry Pi that is running rsyslog. When I start the rsyslog (on the Pi) service listening on 514 UDP, the daemon starts ...
0
votes
0answers
29 views

DD-WRT OpenVPN on Single Access Point

I tried following the instructions from http://www.dd-wrt.com/wiki/index.php/OpenVPN_on_Dedicated_Wireless_Access_Point_(VAP) to setup a virtual access point that routes all traffic through OpenVPN. ...
0
votes
0answers
48 views

How do you reset a Buffalo WZR-D1800H (with dd-wrt installed)?

I installed dd-wrt on my Buffalo WZR-D1800H wifi router some time ago. I've reset this device in the past, but it always takes me about 30 or more minutes to figure it out. Each time I finally reset ...
0
votes
0answers
59 views

DD-WRT Android USB Tether

I have an older WNDR4500 router that has BS DD-WRT v24-sp2 (12/22/14) - build 25697 installed. The router has 2 USB ports, and I was wondering if I could USB tether with my Android phone to the ...
0
votes
1answer
131 views

DD-WRT goes to Web GUI on port 80

I just upgraded my router to DD-WRT v24-sp2 (05/12/14), and I’m trying to configure port forwarding. I opened port 80 to go to a server, but whenever I connect from the outside world, I get timed out. ...
0
votes
1answer
89 views

Landing URL after got connected by router (no auth)

I've been looking for this simple feature since months. All I need to do is to redirect users to my website after they have just connected to my open wifi network. I don't even need any auth service / ...
0
votes
0answers
41 views

Trouble with Static Leases on DD-wrt router

I'm having real issues trying to set up a new DD-WRT router. It is a netgear R7000 with build DD-WRT:- v24-sp2 (12/15/14) std - build build r25344 My set up is basically:- BT Home Hub 4 (Using just ...
2
votes
2answers
1k views

Configure DD-WRT router behind a Cisco cable modem

I have a Linksys WRT54GS router flashed with DD-WRT that I'm trying to get a connection on behind a Cisco DPC3010 cable modem. I can get a connection just fine when I plug my computer in directly ...