0
votes
1answer
42 views

Can a DHCP router with MAC address whitelist be hacked with a VM?

I locked down my whole network’s MAC addresses so that only CPU’s on the whitelist can get an IP from the AirPort Extreme DHCP server and router. Well, guess what. A Mavericks VM with a completely ...
-2
votes
0answers
15 views

Provide this simplest networking solution [closed]

Router 1 ip address: ISP given mask: ISP given gateway: ISP given dns: ISP given DHCP enable router IP address : 192.168.1.1 mask: 255.255.25 5.0 range of IP dhcp: 101-200 Router 2 IPS 2 given in wan ...
0
votes
1answer
18 views

Server 2008 DHCP on a wireless adapter

We have a Server 2008 (x86) computer which acts as a server, also as a router to share Internet into multiple network segments with RRAS. Everything works fine except DHCP on a wireless adapter with ...
0
votes
1answer
38 views

How can I point a domain at a changing IP?

So I'm running a website off my own server. I piggybacked off my dad's domain; I added subdomain, evamsharma.finosus.com, and pointed to our network IP, and set up port forwarding. But when I logged ...
0
votes
0answers
206 views

iPhone self-assigning IP address 169.xxx.xxx when connecting to my slave router

My aim is to have a network configured where all devices can see and communicate with each other, all devices should have access to the internet as standard. The reason why I have decided on a ...
0
votes
0answers
122 views

Connect to Google Play via eth0 android x86

I installed in VirtualBox Android x86 4.0 for eeepc (android-x86-4.0-RC2-eeepc.iso). After installation, android want connect to play, but I haven't configured network. I press "not now". After ...
0
votes
2answers
112 views

Two network-ranges, one gateway - Double NAT issue

I have one network 192.168.0.x which is slowly running out of IP addresses. I wanted to remedy this by creating a second network for mobile devices (192.168.1.x). The first network has a gateway of ...
1
vote
3answers
71 views

Why will my wireless router allow wired clients to get an address outside the router, but not wireless ones?

I have a "main" router that connects to the internet, and then a wireless router that connects to that. The main router's DHCP is disabled, and a computer hooked to that has a DHCP server running ...
0
votes
1answer
27 views

Detecting active devices on LAN from Debian based server

Simply: How can i detect if there are any active devices on lan? More details: I have home server which acts as Internet gateway and wifi access point. Because of server part of its configuration i ...
0
votes
0answers
89 views

dhclient “Can't bind to dhcp address” error

I keep getting the following error message from dhclient upon starting of the Network Manager: Can't bind to dhcp address: Cannot assign requested address. Please make sure there is no other ...
0
votes
2answers
71 views

Bridge two router

I have two router, i want to extend my wifi i have an tp-link AC1750 Router who are directly connected to my cable modem (192.168.11.1) it's ssid is: main_router, dhcp is enabled i have an tp-link ...
1
vote
2answers
376 views

How to get bridge internet connection to wlan0 from eth0?

I have hostapd and dnsmasq installed for distributing my wireless network with a WiFi dongle, and everything is working well. I am also able to connect an ethernet cable and get DHCP, plus internet ...
1
vote
1answer
345 views

Windows 8 running Hyper V containing Windows XP with no connectivity

I've followed all the steps for setting up a VM and did it correctly. The VM started, i installed windows and added a virtual switch(external) with the virtual switch manager. I then added a legacy ...
0
votes
1answer
21 views

Using custom-defined IP address vs DHCP on Different Networks

On Mac OSX, is it possible to let the computer obtain a specific IP address (192.168.1.123) on wireless network #1, and let DHCP assign it a dynamic IP address on all other wireless entworks?
0
votes
1answer
45 views

Using 2 wireless networks, 1 DHCP with internet, 1 using static IP without internet

I have 2 networks at home, 1 is for our home wireless internet,etc which uses DHCP and my other one is for my home automation (PLC's, etc.). I am wanting to use another wireless router without ...
0
votes
1answer
1k views

TP-Link router sometimes fails to negotiate proper IP address

I'm trying to fix the WiFi connection of a family member. They get their internet from a cable modem. The modem is connected to a device that looks like a small Ethernet switch. This switch is ...
0
votes
2answers
510 views

Disconnect other users from DHCP client list

When I log in to my modem webpage I can see lot of employees are connected to WiFi network. This is okay. I have full access to the system and i want to disconnect the particular employee from the ...
1
vote
4answers
1k views

IP Conflicts via DHCP on Home Network & Multiple Router Setup

I currently have a Netgear ADSL modem/router connected to the telephone master socket, which has DHCP enabled. I then have a wired connection to an Apple Time Capsule in Bridge Mode, which is a ...
0
votes
0answers
151 views

Onkyo UWF-1 networking issue

I recently bought an Onkyo TX-8050 network stereo receiver http://www.onkyo.ca/Products/model.php?m=TX-8050&class=Receiver and a UWF-1 wireless dongle ...
1
vote
0answers
162 views

why does my network disconnects from internet every couple of hours?

I have a broadband that here you can see its details. It provides wireless and also I got two more routers that use them as access points. DHCP is disabled on them and these two routers work are set ...
0
votes
0answers
22 views

Create a Home Network for File Sharing and access Internet at the same time

I have 2 hosts A (Windows) and B(OSX) with a couple of mobile devices in my network. When I enabled File Sharing on my hosts, I noticed that their IP's keep on changing which is annoying sometimes. ...
3
votes
1answer
315 views

In Windows 8, How do I make a static IP for each network?

I would like to have it so that my computer sets its IP address statically depending on which network that it is connected to. I have 3 Networks that I regularly use and it seems that with Windows I ...
1
vote
0answers
55 views

Two wireless extenders with same mac address…How to assign IP address dhcp

I have two wireless extenders, and they both have the exact same mac address (same make and model) Now, they work fine in the network, I just wanted to know how can I assign them specific IP ...
1
vote
2answers
578 views

How to configure my 2 router to make them as access points

I have this broadband and the main wireless router: Main Router Also I have two other routers and would like to make them as access points. So All with the same SSID, then the device can choose the ...
0
votes
2answers
68 views

how to know what computers are connected to an AP?

The access point doesn't have DHCP enabled, so I can't look the DHCP table. Is there a way to ping an IP and know what AP is using? Edit: I know what IPs are on the network using nmap, but when I ...
-1
votes
3answers
2k views

How can I put two wireless routers on the same subnet? [closed]

I have two Netgear wireless routers; one primary (WNR2000) connected to the Internet, and a secondary (WNR1000) connected to the primary via a long Ethernet cable to the other side of my home. A LAN ...
0
votes
1answer
555 views

Wireless access point won't allow more than 1 connection

We have a Netgear WGT624 set up as an access point to provide wireless access on our wired network. The wired network has one PC acting as a DHCP server and internet gateway - the WGT624 is set up ...
1
vote
0answers
194 views

Extending Wireless with two Edimax 7416APN repeaters from BT Home Hub 4

I've been attempting to extend my wireless network for the last week or so using the well reviewed EDIMAX 7416APN repeaters. Here's the setup I have now: [BT Home Hub 4]---WIRED--->[1st EDIMAX ACCESS ...
0
votes
1answer
2k views

Running a DHCP Server on DD-WRT in “Repeater Bridge” mode?

I am currently running a Linksys WRT160N router on DD-WRT set up as a "Repeater Bridge". It currently serves to rebroadcast my Virgin Mobile MiFi's WiFi through this router, hence broadcasting a more ...
0
votes
1answer
1k views

How can I fix this conflict between my wired and wireless network connections?

I have two working network connections: One connection is for a wired ethernet card adapter and the other is for a wireless usb adapter. Both connections work fine when used separately, but when ...
0
votes
1answer
202 views

Router “ghost” connections

My Linksys WRT54GS2 V1 has begun to display ghost wired connections in the last weeks. As you can see from the images I have nothing connected except for the power cable. I have tried a hard reset ...
1
vote
1answer
101 views

Configure WiFi router DHCP to assign IPs outside of subnet?

I have a slightly unusual issue with configuring a Wifi router on a shared office space network: We have a single ethernet connection to a building wide router A and we want to run a WiFi access ...
0
votes
1answer
102 views

How can I connect a wireless access point to an existing network (with a proxy)?

im new here, hope you guys can help me out. i was tasked to do the network (wireless and wired) of our new department in our company. our existing network has dhcp server(Windows Server 2003) and a ...
0
votes
1answer
354 views

Windows doesn't send DHCP Request after DHCP Offer

I'm just at a friends place and we have problems with the WiFi. Scenario is, there are (about) 8 Android devices, all without any problems logged in to the WiFi and connected to the internet. Also, ...
0
votes
1answer
66 views

Three routers behind eachother in the network; port-forwarding and wifi

I have setup the network throughout the house, but it is quite complex and often fails somehow. router #0 (192.168.0.1) which is also the modem and has incoming connection router #1 (192.168.1.1) ...
2
votes
1answer
507 views

Two access points with same SSID, loosing connectivity on mobile devices

I have two access points, with the same SSID, same security mode (WPA/WPA2), operating at different channels (1 and 6). I have set the first of them (192.168.1.1) to operate as a DHCP server, while ...
0
votes
0answers
45 views

How can I restart my routers DHCP to the first starting address?

I just changed my router's IP from 192.168.1.1 to 10.1.1.1. My local IP before was 192.168.1.124 and now it is 10.1.1.124. How can I make it 10.1.1.100 (100 is the starting number for my DHCP ...
0
votes
1answer
111 views

How to setup DHCP only on the wireless side of a router or AP?

We are currently running a simple network with unmanaged switches. We already have a Internet feed with router and DHCP. Im looking to add in another separate internet feed, with a 2nd router (NO ...
1
vote
1answer
768 views

How do I set up multiple access points with a Packetfront DRG700 broadband modem?

I have a Packetfront DRG700 broadband modem (fiberoptic), which also has a wireless DHCP server built-in. In addition I have a D-Link DIR-615 router which is connected by cable to the modem. I want ...
0
votes
0answers
158 views

Setup a pxe install without a router

So, I've wanted to work on Linux From Scratch for a while now and I finally got my hands on a (pretty damn) old laptop that I was going to use to play around with. The problem: it has no CD/DVD drive ...
0
votes
1answer
4k views

How to change the dhcp range alloted through ICS in Windows 7 to 192.168.1.x range?

I have set up Internet Connection Sharing in my Windows 7 laptop. Currently the IP range alloted for ICS clients from DHCP is in the range of 192.168.137.x. I am not able to find a way to change the ...
1
vote
2answers
307 views

Laptop won't connect to router, however will connect to other routers and router works with other laptops

It seems I've come across an issue that is unique to using a particular laptop with a particular router. From an initial observation it would appear the laptop is having trouble obtaining an IP ...
6
votes
3answers
703 views

Why does my computer not always automatically request a new DHCP lease when switching networks?

I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease ...
2
votes
2answers
90 views

Reserve DHCP slots for certian users?

My company has alot of outside suppliers and contractors who need access to our wifi network. Currently, we only allow DHCP to hand out 20 addresses for our quest Wifi network. This typically fill up ...
3
votes
2answers
3k views

What happens when router has been set to incorrect time?

I have a D-Link router for my home Wi-Fi network. Everyday at least once the internet suddenly goes down. I am simply not able to connect to the Wi-Fi network. If I just restart the router, it starts ...
0
votes
1answer
57 views

setting up a WGR614v7 behind a linux box

Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before ...
3
votes
3answers
2k views

No internet connection when connected via wi-fi, but fine via ethernet (DD-WRT)

I just bought a new router and installed DD-WRT on it. When I connect to the router via wi-fi, I cannot get an outside internet connection (and in fact, can not connect to the router admin interface ...
7
votes
2answers
1k views

WiFi cannot connect to internet in two router setup

I am struggling to setup my home network. I have the following setup, also shown in the diagram below (sorry for the MS Word screenshot!): My landlord has an ADSL connection, established by Router ...
2
votes
2answers
430 views

Laptop kicks other users off the wifi when it connects, then gets disconnected itself

I've got an Acer Aspire One running Linux. When I connect to my building's wifi, everything seems fine for a short period of time (I can google a few things or start downloading an Apt package), but ...
1
vote
0answers
969 views

Access point as DHCP server

My level of knowledge on networking is moderate. I have the following scenario: Our internet connects to the LAN into a normal port (Dlink DS 1008D Switch) Some of the computers in the office ...