0
votes
0answers
10 views

dd-wrt translates DNS queries sent from LAN from public IP to private IP – how to stop this?

I recently got a router that has dd-wrt firmware installed into it. I'm running a HTTP server behind that router, and as it has a NAT, I have set the appropriate port forwardings. I also have a ...
0
votes
1answer
21 views

dnsmasq not working to point .local addresses to 127.0.0.1

I'd like to get .local addresses (such as test.local) to point to 127.0.0.1 but it isn't working. I'm on latest Ubuntu. In /etc/NetworkManager/NetworkManager.conf I commented out dns=dnsmasq then did ...
0
votes
0answers
22 views

DNSmasq and VPN

I have a question is it possible to use DNSmasq only for local hosts? My situation is: I have a private server and I use DNSmasq to change public to local IP on LAN, In my work we have multiple ...
0
votes
0answers
34 views

Ask dnsmasq the hostname used to find to an IP address

I know I can find a DNS name from an IP address by using a reverse translation DNS query. But that just gives me a DNS name for that IP. Instead, I'd like to find the DNS name that was used to find ...
-1
votes
1answer
46 views

configure my router to translate “example.com” to a website's IP

Is possible to confingure my router to translate certain domain names ex:"example.com" to a specified website's IP ex:"173.194.32.23" ??? I have a Sitecom Modem Router N300, and there are a lot of ...
2
votes
1answer
142 views

reverse usb tethering in strict dns environment

In the environment, all DNS query is blocked by firewall. And wifi or 3G is not allowed I want to let a rooted Android(192.168.42.2) accessing internet by plug usb on PC(192.168.42.1 for usb0 ...
0
votes
1answer
48 views

dnsmasq - Redirect URL request to guest VM

I am running Linux Apache on my local Parallels VM as a guest, my goal is: redirect an URL request (http://test.dev) from host (OS X) to Linux Guest. I had a local dnsmasq setup with MAMP (which ...
0
votes
0answers
563 views

Dnsmasq running on raspberry pi will serve non-local DNS to ethernet but not wireless hosts

I have a Linksys WRV200 wireless router. I have just added a raspberry pi, connected via ethernet, working as a DCHP server and caching DNS server. Dnsmasq also serves local domain names. Dnsmasq ...
0
votes
0answers
36 views

VPN DNS resolution

I have several Windows, Linux, and Mac clients connected to an OpenVPN server. I would like for some of them to be able to resolve internal names (host.vpn.company.com, where the VPN server which is ...
0
votes
0answers
522 views

DD-WRT: dnsmasq headaches with static hosts

I am using dd-wrt (r23503, for the record) on my new Asus RT-AC56U router. Unfortunately, dnsmasq configuration is giving me nothing but headaches. Here's what I want: DNS queries from the ...
0
votes
1answer
80 views

how to use use local nameservers with public domain?

I am testing a dynamic configuration of a nameserver on my local machine. I have a public domain (example.com) that I was trying to point its NS records to my private DNS but my registar does not ...
0
votes
0answers
109 views

dnsmasq returns 127.0.0.1 for lookup itself

This is a follow up to the question, Ping to dnsmasq's host resolvesto 127.0.0.1, because that answer doesn't work for me. It should work -- I found another one having the same answer: ...
0
votes
0answers
501 views

Using dnsmasq with NetworkManager

It was well known that NetworkManager does not play well with dnsmasq (ref: here). I've skimmed throught the lengthy discussion here but still not sure what the recommended way to deal with the ...
1
vote
1answer
453 views

Verify dnsmasq configuration

How to verify dnsmasq's configuration? dnsmasq used to be able to give verbose info about itself in /var/log/daemon.log, as explained in dnsmasq testing. However, when I restarted my dnsmasq ...
1
vote
2answers
572 views

In OS X, how can I prepend 127.0.0.1 to the list of DNS servers obtained through DHCP?

I am trying to use dnsmasq to resolve certain known domains using its configuration, but let the rest of the requests go through to the normal DNS server assigned by DHCP. I cannot get this to work. ...
0
votes
1answer
113 views

Why are only some hosts resolved using DNS?

I have a DD-WRT router configured with DNSmasq. The config is local=/myhome.local/ expand-hosts addn-hosts=/jffs/hosts.dnsmasq This way I can resolve network hosts (e.g. ping macbookair), but other ...
0
votes
0answers
591 views

How to log all DNS requests made through OpenWRT router?

I have an OpenWRT router that is running dnsmasq. I want to create a file that has each domain that has been requested through the router. My output should looks something like this: google.com ...
0
votes
1answer
170 views

DNS server returns valid IP, but browser can't find server?

OK so I have my Raspberry Pi running a DNS server (dnsmasq), and I have my router set up to use it as the DNS server for the whole network. This was working perfectly until a few hours ago when I ...
1
vote
3answers
990 views

Setting up DNS server inside network

OK so here's a little problem I have: I'm trying to set up my Raspberry Pi as a DNS server (for filtering and caching). The Raspberry Pi is in my network, and has a DHCP IP from the router. The DNS ...
0
votes
1answer
217 views

Can Dnsmasq or DNRD forward all DNS packets pass my router?

I have a embedded Linux box as a router which has two interfaces. One interface is connected to public network by dialing into ISP. Another interface (its IP is 192.168.1.1) is connected to LAN ...
0
votes
1answer
165 views

OSX running dnsmasq not always handling default dns queries

I'm a developer on OSX, I've always used .local for local sites im developing, Since ML I've been running DNSmasq to workaround the service query order so I can continue to use /etc/hosts to define my ...
0
votes
2answers
809 views

fritz!box doesn't reply on dnsmasq rules that point to IPs within 192.168.178.### range

To ensure better monitoring of my home network (parental control) I tried and set up a Raspberry Pi with dnsmasq and added in some rules to the dnsmasq.conf, that basically come down to the following: ...
0
votes
1answer
344 views

How do I add custom DNS server and preserving default DNS of ISP in OS X Mountain Lion

I'm using OS X Mountain Lion. I'm using dnsmasq to set up wildcard localhost domain names, such as http://local.dev, to point to localhost. But I have to add 127.0.0.1 in my system preference -> ...
5
votes
3answers
2k views

How to use dnsmasq with DHCP-assigned DNS servers?

TL;DR version: How do I configure dnsmasq to fall back to the DNS servers pointed to by the DHCP server on my LAN, to enable switching wireless networks? On my developer laptop I've recently started ...
1
vote
1answer
603 views

Subdomains for server behind NAT

I have server (ip: 192.168.1.2, openSUSE 12.2, Apache 2) behind router (ip: 192.168.1.1, TomatoUSB Toastman Build). I'm using FreeDNS (afraid.org) and I assigned subdomain (say x.afraid.org) to ...
1
vote
1answer
546 views

How to register subdomains on dnsmasq

how can I register subdomains of my web development server into my DNS automatically? I mean, I wouldn't like to edit the DNS config file, but send something from the client that says 'Hey, I have a ...
1
vote
1answer
680 views

Ping to dnsmasq's host resolvesto 127.0.0.1

I've just set up dnsmasq in my home lan for the first time. I got it as DHCP and DNS. Something strange is that when I ping DEV01 (which has dnsmasq) it resolves to 127.0.0.1 and I don't know why it ...
2
votes
1answer
400 views

Create alias to local hostname

I have the following scenario: A host machine (OS X) and a guest machine (Ubuntu). The guest is running through Virtual Box, and the network configurations is set to "Bridged adapter". Both machines ...
1
vote
0answers
281 views

Windows not recognizing local network domain name

I'm setting up a small network for a club that I'm a member of. The layout is a single server with two ethernet interfaces, connected to a wireless router and a wireless bridge. The bridge connects to ...
1
vote
2answers
500 views

What do I need to make Linux host names resolvable on LAN?

What do I need to get local host names to be resolvable? BIND? DHCP? dnsmasq? With the needed components, how do you configure it? We use Vyatta 6.4 as our router and we have CentOS 6.3 boxes. I ...
1
vote
1answer
608 views

Two DNS servers, one Windows, one Linux

I've got an issue with my home network - I have a DDWRT router running as a gateway and primary DHCP/DNS Server on 192.168.1.1 and a Windows Server 2008 machine running as a domain controller and ...
2
votes
0answers
329 views

Using dnsmasq on OS X when not connected to the Internet

I'm routing dns requests through dnsmasq so that domains I'm using for local development point to 127.0.0.1. This works great when I'm connected to the Internet via Wi-Fi or ethernet, but I start to ...
4
votes
1answer
12k views

How can I set up a 'local' domain so that everyone on my local network can view a locally hosted site?

I want to set up MediaWiki on one of my home machines, and then have all requests made on the local network for 'wiki.home' or 'wiki.local' point to that box. I know that this can be done by editing ...
3
votes
5answers
18k views

DDWRT serving additional DNS servers instead of just the router's IP

I have a DD-WRT router set up with DNSMasq to resolve certain domains to internal addresses and pass everything else thru. The router itself is configured to use Google's public DNS servers to resolve ...
1
vote
0answers
677 views

IPv6 addresses in dnsmasq

As I need to use dnsmasq to route all requests on *.local to my local machine (and use there an IPv6 addresses), i set up the dnsmasq like this: /etc/dnsmasq.d/my-local.conf address=/local/::1 ...
1
vote
1answer
258 views

Request forwarding

I have a WRT54G router running with a sub-domain pointed to it, e.g.: sub.domain.com. Now I want to forward external requests (but also local) to computers which are connected to my router so if I ...
2
votes
2answers
3k views

dnsmasq without altering /etc/hosts file manually

I've trying to get dnsmasq working as a combined dns and dhcp server. It's infuriating so far... In short, the DNS works fine for anything added to /etc/hosts, and the dhcp works fine, but the dhcp is ...
0
votes
1answer
452 views

Is it possible to use dnsmasq to map example.local to IP:port?

I'm using a Linksys WRT54GL running the Victek Mod Tomato 1.25 firmware. It has support for dnsmasq. I also have a local server running on a certain IP and port. How can I map an internal domain name ...
5
votes
2answers
5k views

DD-WRT: DNSMasq expand-hosts not working

I have a Linksys router running DD-WRT (Firmware: DD-WRT v24-sp2 (09/08/09) mini). I have it successfully resolving the DNS names for my DHCP-assigned systems, but only when I fully-qualify those ...