The tag has no wiki summary.

learn more… | top users | synonyms

4
votes
6answers
21k views

DD-WRT serving additional DNS servers instead of just the router’s IP

I have a DD-WRT (using DD-WRT v24SP2-MULTI (03/21/11) std) router set up with DNSMasq to resolve certain domains to internal addresses and pass everything else thru. The router itself is configured to ...
0
votes
1answer
25 views

Locate Host Name on LAN (DNSMasq on DD-WRT)

I am running DNSMasq as both my DHCP and DNS server on my DD-WRT router. I had thought that DNSMasq was adding hosts that it registered in DHCP to the DNS server automatically, but I have a few ...
1
vote
1answer
23 views

Running ipv6 tunnel on windows 7 alongside local dns server

I am running an IPv6 tunnel via Hurricane Electric in Windows 7, which has been working fine for ages. My router does not support IPv6 at all natively. I am also experimenting with running a local ...
-1
votes
0answers
29 views

hostapd and dnsmasq do not provide DHCPOFFERS for non Android devices

I set up a hostapd on my linux laptop and I want my embedded linux tablet to connect to this AP. Therefore I use the following config for hostapd. ##### hostapd configuration file ...
0
votes
4answers
3k views

How to skip pushing the default gateway via DHCP in OpenWRT?

I have a router with OpenWRT that I want to resolve IP addressing with DHCP without setting a default gateway. I have added a DHCP-Option parameter with value 3,0.0.0.0 that is supposed to set the ...
0
votes
0answers
19 views

LAN access to home server using dnsmasq

I set up an OwnCloud server on a Raspberry Pi. To access it easily, I used a dynamic dns solution which points to my public IP. Every port is open and it works just fine when I access the server ...
0
votes
1answer
16 views

Restarting BIND service getting error

When I restart the BIND service getting this error from syslog named[4960]: /etc/bind/named.conf:15: couldn't add command channel 127.0.0.1#953: address in use Even when I execute nslookup ...
0
votes
1answer
303 views

dnsmasq not working without internet connection in OS X Yosemite

No0b here. I have been trying to setup a local environment for web development on OS X Yosemite using these approaches (http://passingcuriosity.com/2013/dnsmasq-dev-osx/ and ...
0
votes
0answers
36 views

Using local DNS server in offline mode

Using OS X Yosemite I have dnsmasq running locally and it works great while I'm connected to a wireless network. However, once I go to adhoc mode or offline mode, the OS refuses to use any DNS ...
0
votes
1answer
77 views

dnsmasq: DNS request timed out for machines in local network

I have a vagrant machine running on my mac with virtual hosts I want to make available to my local network. I installed dnsmasq via brew and have the following in its /usr/local/etc/dnsmasq.conf: ...
0
votes
0answers
52 views

Own DNS is very slow

I run my own DNS with Ubuntu 14.04 and dnsmasq on a VPS of my hosting provider. If I enter the DNS address in the network adapter on my windows machine, websites load very slow. It takes less than a ...
0
votes
1answer
324 views

Using dnsmasq to address machines by name and resolve external hostnames

I'm having some trouble with my dnsmasq setup. All I want it to do is resolve certain hostnames to certain ip addresses for any machine on my network. More specifically, I'm trying to enable all ...
0
votes
2answers
2k views

Using dnsmasq with NetworkManager

It was well known that NetworkManager does not play well with dnsmasq (ref: here). I've skimmed throught the lengthy discussion here but still not sure what the recommended way to deal with the ...
0
votes
1answer
24 views

Custom entry in hosts file not directing to correct IP

I have an entry in my local hosts file pointing to: $my-server-ip development.$client-domain.com When I ping development.$client-domain.com, I get $server-ip, but when I visit it in a browser, I do ...
0
votes
0answers
131 views

Windows 7 DHCP flooding server with requests

Am attempting to connect a Windows 7 laptop to a Debian server running dnsmasq. The Windows 7 machine doesn't seem to like the DHCP info it's getting as it re-requests it every ~10 seconds. The log ...
1
vote
2answers
1k views

In OS X, how can I prepend 127.0.0.1 to the list of DNS servers obtained through DHCP?

I am trying to use dnsmasq to resolve certain known domains using its configuration, but let the rest of the requests go through to the normal DNS server assigned by DHCP. I cannot get this to work. ...
0
votes
0answers
27 views

dd-wrt internal dns resolves directly for a few hosts, with a “.” for a few hosts

I have a dd-wrt router, and a bunch of static leases. The machines themselves all acquire IP through DHCP. When I do a "nslookup host1" or "nslookup host2" the correct IP address is displayed. All ...
0
votes
0answers
29 views

Maximum clients with USB hotspot

I already asked this in "Unix & Linux" StackExchange forum, and they suggested me to ask the question here instead. So, here i am! I made a small access point using Hostapd, Dnsmasq and Debian ...
1
vote
1answer
822 views

How do I configure DNSMasq on DD-WRT when using Active Directory?

I have a server running Windows Server 2012R2. It is a domain controller. I have a router running DD-WRT version DD-WRT v24SP2-EU-US (08/19/10) std (SVN revision 14998). The router is configured with ...
1
vote
1answer
66 views

Block (nullroute?) an IPv6 hostname using /etc/hosts

I'm trying to prevent my web browser from communicating with certain hosts (mostly ads and tracking). I have a list of such hosts in my /etc/hosts file. For IPv4 I can do: 255.255.255.255 ...
0
votes
0answers
46 views

How to configure dnsmasq to work with vmware fusion?

I am trying to set a local development environment in which every .loc domain will default to my ubuntu vm running with vmware fusion. Currently I have to add every domain in my /etc/host like ...
0
votes
2answers
382 views

dnsmasq not working to point .local addresses to 127.0.0.1

I'd like to get .local addresses (such as test.local) to point to 127.0.0.1 but it isn't working. I'm on latest Ubuntu. In /etc/NetworkManager/NetworkManager.conf I commented out dns=dnsmasq then did ...
0
votes
1answer
76 views

dd-wrt translates DNS queries sent from LAN from public IP to private IP – how to stop this?

I recently got a router that has dd-wrt firmware installed into it. I'm running a HTTP server behind that router, and as it has a NAT, I have set the appropriate port forwardings. I also have a ...
0
votes
1answer
3k views

DD-WRT: dnsmasq headaches with static hosts

I am using dd-wrt (r23503, for the record) on my new Asus RT-AC56U router. Unfortunately, dnsmasq configuration is giving me nothing but headaches. Here's what I want: DNS queries from the ...
0
votes
0answers
63 views

hostapd virtual wlan interface no ip from dnsmasq

I have installed hostapd and also dnsmasq to ppovide dhcp only. On the virtual interfaces i do see the ssid and all. So hostapd seems to work fine( although i am not sure). When i try to connect to ...
0
votes
1answer
36 views

dnsmasq circular loop error

I know I am missing a configuration somewhere, but I just can't find it. I have two routers, A is upstream of B, both running dnsmasq. A has domain A.com B has domain B.A.com A has in dnsmasq.conf ...
0
votes
1answer
808 views

Cannot access internet and local DNS server using OpenVPN on DD-WRT router

I tried to setup Dnsmasq and OpenVPN server on my DD-WRT router. My goal is to connect to my dd-wrt (v24-sp2 (03/25/13) mega) router via openvpn and: use my local resources, address to them using ...
0
votes
2answers
219 views

router dhcp config for pxe boot

I want to set up pxe/tftp server in my network. I already have a dhcp server on my isp router wich has dhcp option 60 and dhcp option 240. I nee to know if can i set it up in order to lease pxe info ...
0
votes
1answer
152 views

dnsmasq - Redirect URL request to guest VM

I am running Linux Apache on my local Parallels VM as a guest, my goal is: redirect an URL request (http://test.dev) from host (OS X) to Linux Guest. I had a local dnsmasq setup with MAMP (which ...
0
votes
1answer
116 views

Computer on home network resolves host name to different IP addresses

I have a computer on my home network that is also accessible from the internet through a dyndns host name. When I am at home, I need the xxx.dyndns.org host name for my machine to resolve to an IP on ...
1
vote
0answers
121 views

how to pick addresses and DNSMasq server for PPTP VPN client (in DD-WRT)?

I must be confused about terminology for addresses my remote network uses, but I could not get my DD-WRT (build 20548) connect to the PPTP server. At least I could not even verify that I am connected ...
0
votes
0answers
72 views

/etc/ethers is not being read by dnsmasq

I recently configured dnsmasq on Raspbian, and everything was working perfectly except that /etc/ethers wasn't being read (yes, I did uncomment read-ethers and remember to restart dnsmasq) - the ...
1
vote
0answers
56 views

dnsmasq doesn't get udp queries

I'm trying to setup dnsmasq on debian box to serve in my local network. dnsmasq seems to work. It listens on 53 port UDP and TCP. It answers queries (nslookup or dig) locally, but when I try to query ...
4
votes
1answer
17k views

How can I set up a 'local' domain so that everyone on my local network can view a locally hosted site?

I want to set up MediaWiki on one of my home machines, and then have all requests made on the local network for 'wiki.home' or 'wiki.local' point to that box. I know that this can be done by editing ...
0
votes
0answers
46 views

DNSmasq and VPN

I have a question is it possible to use DNSmasq only for local hosts? My situation is: I have a private server and I use DNSmasq to change public to local IP on LAN, In my work we have multiple ...
0
votes
0answers
56 views

Ask dnsmasq the hostname used to find to an IP address

I know I can find a DNS name from an IP address by using a reverse translation DNS query. But that just gives me a DNS name for that IP. Instead, I'd like to find the DNS name that was used to find ...
-1
votes
1answer
54 views

configure my router to translate “example.com” to a website's IP

Is possible to confingure my router to translate certain domain names ex:"example.com" to a specified website's IP ex:"173.194.32.23" ??? I have a Sitecom Modem Router N300, and there are a lot of ...
1
vote
1answer
345 views

Domain Resolving To Wrong IP Using DNSMASQ

I have two VMs, one with my application which talks to the other vm running asterisk (and centos). The config for the application server needs to point to the asterisk box. To avoid having to change ...
2
votes
1answer
390 views

reverse usb tethering in strict dns environment

In the environment, all DNS query is blocked by firewall. And wifi or 3G is not allowed I want to let a rooted Android(192.168.42.2) accessing internet by plug usb on PC(192.168.42.1 for usb0 ...
2
votes
2answers
2k views

Why is Chromium bypassing /etc/hosts and dnsmasq?

I'm using hostsblock together with dnsmasq on Arch Linux to block some websites, one of them is facebook.com and www.facebook.com. I know everything is working properly because a simple ping to ...
0
votes
0answers
1k views

Dnsmasq running on raspberry pi will serve non-local DNS to ethernet but not wireless hosts

I have a Linksys WRV200 wireless router. I have just added a raspberry pi, connected via ethernet, working as a DCHP server and caching DNS server. Dnsmasq also serves local domain names. Dnsmasq ...
5
votes
3answers
3k views

How to use dnsmasq with DHCP-assigned DNS servers?

TL;DR version: How do I configure dnsmasq to fall back to the DNS servers pointed to by the DHCP server on my LAN, to enable switching wireless networks? On my developer laptop I've recently started ...
0
votes
1answer
134 views

how to use use local nameservers with public domain?

I am testing a dynamic configuration of a nameserver on my local machine. I have a public domain (example.com) that I was trying to point its NS records to my private DNS but my registar does not ...
0
votes
0answers
254 views

dnsmasq returns 127.0.0.1 for lookup itself

This is a follow up to the question, Ping to dnsmasq's host resolvesto 127.0.0.1, because that answer doesn't work for me. It should work -- I found another one having the same answer: ...
0
votes
1answer
368 views

Home Router (DD-WRT) and using DMASQ for a host via dynamically assigned via DHCP

I have a home Home Router (DD-WRT) and I want to be able to look up machines via hostname. However, I would like to do this with machines where the IP Address id dynamically given via DHCP. Example ...
0
votes
1answer
273 views

OSX running dnsmasq not always handling default dns queries

I'm a developer on OSX, I've always used .local for local sites im developing, Since ML I've been running DNSmasq to workaround the service query order so I can continue to use /etc/hosts to define my ...
0
votes
1answer
632 views

dnsmasq fails to start on boot Ubuntu 13.10

dnsmasq fails to start on boot of Ubuntu 13.10, showing the error in the syslog: dnsmasq failed to create listening socket for 192.168.0.10: Cannot assign requested address When I start it ...
0
votes
1answer
235 views

Restrict static IPs (Only DHCP) on Debian Squeeze

How can i restrict access to the Internet for users with static IPs? Can i disable free dhcp leasing? I'm running Debian Squeeze with dnsmasq as dhcp server. All users has their own ip, mapped to ...
1
vote
3answers
2k views

Setting up DNS server inside network

OK so here's a little problem I have: I'm trying to set up my Raspberry Pi as a DNS server (for filtering and caching). The Raspberry Pi is in my network, and has a DHCP IP from the router. The DNS ...
0
votes
1answer
234 views

DNS server returns valid IP, but browser can't find server?

OK so I have my Raspberry Pi running a DNS server (dnsmasq), and I have my router set up to use it as the DNS server for the whole network. This was working perfectly until a few hours ago when I ...