Questions specific to writing to DVDs

learn more… | top users | synonyms

84
votes
3answers
6k views

How are commercial DVD's burned? [closed]

I'm not talking about the DVD-R's here. When you buy retail software and DVD movies from the store for example, how is that DVD burned onto the original disc? What would I need if I want to burn those ...
26
votes
3answers
2k views

Appending to non re-writable DVD

Can you still burn/write additional files to a used non re-writable DVD? For example, after I burn a 900 MB .iso to a DVD, can I still write additional files to that same DVD in the future?
14
votes
5answers
37k views

Why is desktop.ini “Ready to Be Written to the Disc” of any CD or DVD inserted under Windows 7?

I have a netbook with an external CD/DVD burner running Windows 7 Starter. Whenever I put any CD or DVD (doesn't have to be blank) in the drive and navigate to its path in Windows Explorer, it ...
14
votes
1answer
4k views

Where is the serial number of the DVD/CD writer stored on the CD?

I was reading the Wikileaks FAQ (archived here), it says: Many CD and DVD writers will include the serial number of the DVD or CD writer onto the CD/DVDs they write. If the post is ...
10
votes
1answer
587 views

How to check if a blank DVD is damaged?

Today I burned a DVD, but when I insert it into my external DVD drive I am told that it is blank, but if I try to burn something else on it, it simply gets ejected. The DVD in question is a -R Dual ...
8
votes
5answers
2k views

How do I allocate/split folders optimally to fit on the minimum number of DVDs?

I need a wayto automatically allocate/split selected folders so that each class of folders take the closest value to 4.7 GB (a single layer DVD-R or DVD+R). While doing this, files must remain intact ...
5
votes
2answers
535 views

Does burning an ISO file on a non-rewritable DVD make the DVD read-only?

If I burn an ISO file on a non-rewritable DVD, does the DVD become read-only?
5
votes
2answers
6k views

Can my DVD burner write “Dual Layer” disks?

Is there a generic way to find out if a DVD burner can burn dual layer DVD’s without trying and potential waste a disk? Right now it’s this drive I’m wondering about but I'd like a solution that ...
5
votes
1answer
14k views

What does “Power Calibration Area Error” mean when I'm trying to write a DVD

I'm trying to write a Windows 7 DVD iso to a DVD+R, single layer, 4.7GB disk. The source ISO file size is about 2.3GB. The burner is a hp DVD RAM UJ897, while the media is a Sony D31 DVD+R. I tried ...
5
votes
3answers
5k views

Free software that will allow me to burn a .mov video directly to DVD [closed]

Is there an easy way for me to burn a .mov file to a video DVD without having to convert it? Either a free burning app that's capable or some kind of patch that will allow me to use Windows DVD Maker ...
4
votes
3answers
6k views

Is there any way to check the “history” of burned CDs on Win 7?

I was wondering if there is any way to check what files where burned to what CD/DVD from a Windows 7 computer? In other words, is there a log function which records what files where burned to disk? ...
4
votes
2answers
841 views

Can you detect the speed at which an optical disc was burned?

If you have some burned discs that don't work, you might want to find out at what speed they were burned to perhaps try and re-burn at a lower speed. So if you don't know the original burning speed, ...
4
votes
4answers
8k views

Is there a free program to emulate a DVD writer? [closed]

I have a Sony P-Series netbook (VGN-P11Z) with no optical drive. It has an option to burn recovery DVDs with an external DVD drive. I don't have an external DVD drive but would like these DVDs just ...
4
votes
1answer
665 views

Reproducing limited DVD copy protection

For those with experience in the file systems and intricacies of video DVDs I apologize for any ignorance on my part. I just encountered something that got me to thinking, as was hoping someone my be ...
3
votes
3answers
2k views

(How) can I split the Windows 8 Dev Preview + Dev Tools ISO in 2 DVD's?

I downloaded the W8DP with Developer tools, but it's 4.8 Gb, just to taunt me (as standard capacity DVD's are 4.7 Gb). Is it possible to split it on 2 CD's? Or if not, how would I install it? I ...
3
votes
2answers
112 views

Use the 'fresh' / unused area of a rewritable DVD?

When re-using a rewritable DVD, I want to use the unused area of the disc. So for example, when I burn a 1 GB Linux distro onto a rewritable DVD, and then burn other distro(s) onto the same DVD, it ...
3
votes
2answers
9k views

Why isnt the ISO I burned to a DVD bootable?

I downloaded an ISO of Windows 7 Home Premium 64 bit From Digital River to try to restore a laptop. I downloaded the ISO and burned it to a Memorex DVD and tried to boot the laptop from it using the ...
3
votes
3answers
5k views

How can I create my own copy-protected DVDs?

I'm giving out a collection of PDFs to some people on DVD, so I'd like to burn them so that they can't make copies (or at least not too easily). Are there any applications or guides that will help me ...
3
votes
1answer
330 views

How to prevent DVD-R/W “endless reads” with AoA DVD Copy?

I have a Windows 7 Ultimate machine with a DVD-R/W installed. It been working quite reliably – except for now. I'm in the process of copying a series of DVDs using a program called "AoA DVD Copy" ...
3
votes
5answers
9k views

How can I burn many movies to a video DVD?

I once bought a DVD containing four 90-minute-long movies. Now I'm trying to write such a DVD, but don't know how to do it. I tried to use DVD-Flick, but it says the disc is 98% used for a single ...
3
votes
0answers
546 views

Check if CD/DVD is Finalized

Is there a simple way to check if re-writable media has been finalized? So far the only recommendations I can find suggest that I attempt to start another write session using the disc and if it fails ...
3
votes
0answers
322 views

How to use DVD+RW (UDF) both in windows and linux?

I have dvd+rw disk. I would like to create UDF file system on it to use with windows 7 (and newer) and gentoo both. How must I prepare media and what commands should use to mount it in linux? What I ...
3
votes
1answer
1k views

How do I close DVDs when burning on Windows 7?

When I burn DVDs using Explorer on Windows 7, there is no option of closing the DVD. This results in some MBs of free space after the DVD has been written (multisession). How do I close the DVD on ...
2
votes
4answers
3k views

DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder?

Is it more reliable, faster, longer lasting to burn to CD/DVD a zip (or a few large zips) of files rather than the files as a folder? Just thinking if 1000s of small files would not be as efficiently ...
2
votes
3answers
204 views

Burning DVDs to disk - what audio codec should I pick?

I finally got around to burning all the DVDs to files, so that I can get rid of all the plastic media once and for all. Most DVDs have several audio codecs available (2 channel stereo or 5.1 Dolby). ...
2
votes
1answer
2k views

What is the largest file I can write to a DVD?

I am creating an archive of a large file set using the 7-Zip command line tool, and I am going to write the archive to DVDs (2 sets, to be safe). Assuming exactly one file (a part of a 7-Zip archive) ...
2
votes
3answers
1k views

How does one split a set of files across a set of DVDs?

I have a set of files which total about 12 GB, which I would like to burn to a few DVDs. I could manually try to "bucket" things, but it would be nice if there was a piece of software which could put ...
2
votes
4answers
734 views

DVD authoring software that makes menus automatically (using filenames in menus)?

I often grab handfuls of .mpg or .avi movies and burn them to playable DVDs. I like having DVD menus, but I don't really need them to say anything beyond what's in the filename. Right now I'm using ...
2
votes
1answer
49 views

Is it possible to rewrite CD-R, DVD-R, Bluray-R discs with a modified firmware?

I know there were no such hacks observed. But if we consider case of corporate attack (firmware virus created by ROM device producing corporation itself) on privacy of a person. Would it be possible ...
2
votes
1answer
74 views

What is the difference between making a dd of a DVD and ripping software [closed]

I don't understand something. If I want to copy a DVD why not just dd the drive and be done with it? Why would anyone ever want to use ripping software if they can just do a simple dd?
2
votes
3answers
2k views

Installing SATA dvd burner on machine with no spare SATA ports/connectors

I have the following motherboard Tyan Thunder K8WE S2895A2NRF ...
2
votes
5answers
20k views

Burn DVD when I have vob files only

have some .vob files ( entire VIDEO_TS folder of a DVD but not any other file or folder like AUDIO_TS.. etc) and I want to burn a disc compatible with a DVD player. How can I do this? No dvd burner ...
2
votes
3answers
2k views

Hardware error while burning DVD

I have Windows 7 and a Sony Vaio VPCSA but I never could write a DVD. I can write a CD but when I try to write a DVD with Nero it just fails with a hardware error. I bought new blank DVD+R and still ...
2
votes
1answer
282 views

If a DVD burning gets canceled halfway through, can it still be burned later?

Is it still usable? This is a DVD+R if it matters.
2
votes
1answer
6k views

How to get an external DVD drive to work?

I've bought an external DVD reader (Samsung, USB Slim Portable Optical Drive). But, it couldn't read CDs/DVDs on my PC. When I tried in another PC, it's okay. What's wrong with my PC? The OS is ...
2
votes
2answers
1k views

If I burn a dvd with files on mac, is it going to be readable on another systems?

I don't want to burn a DVD with files that is only going to be read by newer Windows versions, and not by a Linux box. Can I trust on Mac's bultin DVD recorder in Finder in creating fully compatible ...
2
votes
3answers
16k views

How can I speed up dvd burning/encoding in windows dvd maker?

I'm using windows DVD maker to burn a DVD so it can be played on my DVD player. However, its taking a very long time in the encoding phase (over an hour). Is there any way to speed it up? Edit ...
2
votes
1answer
103 views

Create a DVD from a .wmv keeping quality

I'm trying to create a DVD from a .wmv file. It is very important to keep the current .wmv's quality when the DVD is created. I'm sure ffmpeg --as almighty as it is-- can do the job. Right know I'm ...
2
votes
1answer
1k views

IDE to SATA convertor Motherboard Issue

I bought new motherboard Intel DH67GD which has not IDE interface to attach the DVD writer. It has 2 SATA with 6Gb/s, 3 SATA with 3Gb/s and 1 e-SATA with 3GB/s. Mmobo specs link. How can I connect my ...
2
votes
1answer
1k views

Difference between white and silver printable CD/DVD by Verbatim

Are the silver ones exclusively for thermal printing and the white ones for inkjet printing ? Or is there a silver type for inkjet as well ? Do you have photos of both type after printing ? I've never ...
2
votes
1answer
499 views

Free commandline CD/DVD burner for Windows working without installation [closed]

I'm looking for a freeware CD/DVD, command-line burner for Windows without installation requirement. Found CommandBurner, but unfortunately it needs to be installed. Is there any portable alternative? ...
2
votes
3answers
4k views

LG GH22NS50 Super Multi DVD Writer doesn't read DVD-R dvd's

I have my old data on backups now these are atleast 2-3 years old and we used to use DVD-R disks then, I burn using Nero and always verify my disks after burning. Now I have a new LG GH22NS50 Super ...
2
votes
2answers
271 views

How to burn DVD/Blu-Ray disk with copy protection

I've created video studying material for my students and would like to know if it's possible to burn my disks with basic copy protection. I realize that it will be possible to copy them anyway if one ...
2
votes
3answers
3k views

growisofs warnings when writing to Blu-ray Dual Layer discs

I'm archiving my media collection onto BD-R Dual Layer discs but keep getting the following IO errors at the end of the writing process (usually > 95% complete) : :-[ WRITE@LBA=168e800h failed with ...
2
votes
2answers
1k views

What's the point of CD drive offsets?

Why are there different offsets for CD Drives, what's does the read and write offsets mean? How can I know the offset for my CD/DVD writer?
2
votes
1answer
49 views

Writing content of two CDs into a DVD

I have a movie, which is split in twice, because the source was 2 cd's. This movie has also subtitles(2 str files), which are synchronised. I wish to put this movie, on a dvd and I don't know which ...
2
votes
1answer
2k views

Need to recover data from a poorly burnt 8.5GB dual-layer DVD - Cannot copy half the data from the disc

Synopsis: I had a series of backup CDs that I had burnt some time ago. In order to consolidate the many discs I copied them all to my hard drive in separate folders, compressed them into .RARs (at ...
2
votes
1answer
491 views

Software for burning multiple dvds when 1 dvd is not big enough

Consider the scenario where one has 10Gb of pictures they want to backup to DVD. Obviously, this will not fit on one DVD. However, 3 DVDs would do the trick just fine. Is there software that will ...
2
votes
0answers
963 views

Increase USB time-out for Windows 8?

PREFACE: Sony's web site states clearly that the DRX-840U is a plug-and-play device that Windows should recognize and because of this, there are no downloadable drivers available for the drive. I ...
2
votes
3answers
616 views

How to create a virtual video CD/DVD

Let's say I have a video file in AVI or MPEG format. I want to make a video CD (or DVD) for that video file (not data CD/DVD). But I don't want to burn a real CD -- I want to make a virtual video CD, ...