0
votes
0answers
21 views

firewall detecting outgoing connections of weird hostnames

Recently, I am monitoring every outgoing connection with the help of my firewall. Sometimes when I want to connect to the Internet I receive alerts that some strange looking hostname is going to have ...
0
votes
3answers
33 views

Is the any way other then ping to detect internet connection?

I have a rails server (Linux). I can open the site with machine A. Using machine B I just can use ssh port to connect it, but it cannot open the site and the rails server cannot detect the http ...
0
votes
0answers
8 views

Block all outgoing ports from iptables.

I have a windows xp machine running specific application which can be access by single port (27500). there is nothing else i want to access on this machine. If i block all outgoing ports from this ...
0
votes
0answers
17 views

Connect to VM to VPN through another VPN

My current setup is: My work desktop connects to our corporate VPN. I have a VM (Linux Mint) in VirtualBox that I am attempting to connect to another VPN (Private Internet Access). The VM in ...
0
votes
1answer
32 views

Portforwarding fails

I know how to portforward and I did it on at least 5 different routers at different places. But at home, it does NOT work. I can't figure out why. I tried different routers, even routers that I ...
0
votes
1answer
25 views

Can I backup and restore firewall settings on win 8.1?

Can I backup and restore the firewall whitelist on windows 8.1, independently of any other system settings??
1
vote
1answer
14 views

Open ports in Ubuntu 13.10 server

Im setting up a realtime gameserver fps-game, and then i need to configure ports. Just to mention, i will setup multiple servers for this game on the same ip address, which means i must open multiple ...
0
votes
1answer
46 views

Comodo Firewall blocks Cisco Anyconnect VPN

I am running Comodo Internet Security Firewall (6.3) and trying to connect to work using Cisco AnyConnect VPN client. I can make the connection but can't do anything else, not even ping by IP ...
0
votes
0answers
29 views

How to correctly configure iptables on a laptop?

I have run these commands (tried switching the order too) because I want to set up a firewall on my laptop so that nobody can connect to it (except of course in response to a connection I've made): ...
1
vote
1answer
43 views

FTP not accessible outside of LAN

Ok so I really need some help with this, I have XAMPP installed and am hosting a webiste with it for my friends and i to work on. I am able to see the site just fine and also i am able to get to ...
0
votes
0answers
21 views

Why can I not block certain applications on Windows 7 Firewall?

The situation is this. I open firewall.cpl in the start menu and I'm trying to block a specific application from accessing the Internet (one which wasn't present on the list, I might add--so I added ...
0
votes
1answer
66 views

Can a people DDOS a block Port?

The title says it all, I've search around the net but no avail. From what I understand, DDoS is a distributed denial of service attack, where multiple people sent a huge request at a same time which ...
0
votes
0answers
13 views

Programming the firewall on a Siemens router

I have a Siemens ADSL SL2-141 router. From the web interface, I can program the firewall (e.g. block/unblock IP addresses). I want to do the same programmatically via telnet. But, when I ask for ...
0
votes
1answer
46 views

Opening a port on CentOS server not working externally?

I am trying to to setup a Ghost blog instance on port 80 of my CentOS 6 virtual server. There are no pre-installed web servers occupying port 80. If I run Ghost in production mode as a background ...
1
vote
1answer
47 views

No Internet Connection on using Buffalo WHR-G300N

I have used the Buffalo WHR-G300N over 2 years while I will use it for connecting all of my devices to Internet @ home. However, two days ago, I have the issue that the router suddenly disconnected ...
0
votes
1answer
33 views

Redirect ports with iptables

I need to do redirect port 443 on all interfaces to 8080 on one interface using iptables on a box with 2 NICs. I also need to block pretty much anything else on those interfaces. Here is my iptables ...
0
votes
3answers
34 views

outgoing ssh fails from only one machine on lan to outside network

I have multiple servers in my LAN (which I'll refer to as Box1), and they are all able to make outgoing SSH connections, except one that stopped recently, which I'll refer to as Box2 (actually, I'm ...
0
votes
1answer
30 views

Questionable NTP Traffic at Firewall?

I checked my firewall logs and noticed odd traffic patterns for NTP or UDP/123 (shown below). I don't understand the round robin'ing that's occurring from my hosts. And I don't understand why its ...
0
votes
0answers
52 views

Amazonaws blocked by modem?

since some time i have the following problem: I can't download a .exe file (in my case the "Minecraft.exe" file) from s3.amazonaws. It does not work on 2 laptops, which are connected with a Vodafone ...
0
votes
1answer
27 views

Reach ssh server behind a router on embedded system using established socket connection

I have developed an embedded application running linux to do remote I/O control. The application open a socket connection to my server to communicate, periodically, the state of the I/O and getting ...
0
votes
1answer
78 views

Asterisk server firewall script allows 2-way audio from incoming calls, but not on outgoing?

I'm running an Asterisk PBX on a virtual machine directly connected to the Internet and I really want to prevent script kiddies, l33t h4x0rz and actual hackers access to my server. The basic way I ...
0
votes
4answers
53 views

Would a switch be covered by a router's firewall

So... Hopefully; this is the right place for this question. I need more Ethernet ports on my home network. Sadly, we already have an old router connected to the main router and we still need more ...
0
votes
2answers
39 views

How can I get Windows 7 firewall from being stuck in public network?

A few weeks ago, my Windows 7 Firewall switched itself from a private network to a public network. I noticed the problem when I was trying to stream a movie from my computer to my TV (as I did dozens ...
0
votes
1answer
118 views

Block All Traffic and Allow from Defined IP only in IPTABLES

I want to create a gateway firewall for my network . I want to block all the internal traffic on gateway and allow it from two computers only . On gateway --> eth0 is network card in gateway PC ...
0
votes
0answers
15 views

How do I configure Windows Firewall to disallow inbound connections only at work, but still treat work and home as private networks otherwise?

I have a Windows 8.1 laptop that I use at home and at the office. When connected to my router at home, I want all the features associated with Windows Firewall's notion of a "private network"--that ...
0
votes
4answers
142 views

Remote into Linux workstation behind a firewall using NoMachine or other remote desktop service

My question is very similar to this question: Remote into Linux workstation behind a firewall My work has firewall and ssh server. The ssh server is listening to the default port 22. Normally I ...
2
votes
0answers
169 views

Why does NTP require bi-directional firewall access to UDP port 123?

From What are the iptables rules to permit ntp?: iptables -A INPUT -p udp --dport 123 -j ACCEPT iptables -A OUTPUT -p udp --sport 123 -j ACCEPT Also, from the NTP website: ... ntpd requires ...
0
votes
1answer
157 views

Cablemodem (SBG6580) firewall denying some outbound traffic? Why? Not configured

I finally got around to turning the syslog on for my cablemodem (Motorola Surfboard SBG6580) and I'm seeing about the expected amount of inbound attackage being blocked... 2014-05-30 21:59:02 ...
0
votes
3answers
39 views

How can I connect to a VPN with a restrictive network?

I have recently relocated and the network I have been provided blocks every outgoing TCP port except for 80 (http) 443 (https) 465 (smtps?) 587 (submission) 993 ...
1
vote
1answer
159 views

VPN and getting router/firwall configuration correct

For the life of me can not get my VPN working using PPTP or L2TP or anything. My subnet is set to 192.168.13.1 to avoid conflicts. I have tried to reach my desktop/server from my laptop/client using ...
0
votes
1answer
54 views

Bypassing proxy for loopback/locahost

I am developing a web application where in I am running a webserver at localhost:3000 and my app is deployed on the same. Access to this URL through a web browser works fine because there is an ...
0
votes
1answer
83 views

iptables --append FORWARD required for routing between NIC alias IPs?

I have an ubuntu box with a single NIC. In order to bind a number of services (like apache, dnsmasq, etc), I have bound them to different alias's (e.g. eth0:0, etc), some of which are on completely ...
0
votes
0answers
29 views

How should I configure my Tor-dedicated firewall for optimum security?

I'm setting up a Tor-based isolating proxy using the 'Anonymizing Middlebox' iptables rules specified here: https://trac.torproject.org/projects/tor/wiki/doc/TransparentProxy i.e. iptables -t nat -A ...
0
votes
1answer
93 views

How do I fix these iptables?

I am trying to setup my networks firewall, and am having trouble because i keep getting kicked out of SSH because of mistakes. Here's what I currently have: # Custom Rules iptables -F iptables -X ...
1
vote
1answer
180 views

Game Client's Listening Server Unable To Establish A Successful TCP Connection (Updated)

Scenario, A Risk of Rain On a game called "Risk of Rain" (RoR), I am hosting my own listening server. However to my demise, it seems that nobody can successfully join my server. I have done the basic ...
0
votes
2answers
35 views

Why are these iptable rules keeping me from browsing the internet? (allowing 80,443,53)

This is for my home machine. Here are the rules: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 ...
0
votes
1answer
163 views

Possible to find out what's using javaw.exe to connect outside the network?

Is there any way to find out who/what is running something through java/javaw.exe, in order to determine if the outbound network connection is safe or rogue? I use a third-party firewall (Windows ...
0
votes
0answers
50 views

OpenVPN Server & Two Gateways

I have a network setup as follows: The firewall allows incoming connections for the VPN server on OpenVPN ports and all outgoing connections from the NAT. It is stateful, even for UDP "connections" ...
0
votes
1answer
56 views

SSH into host on the same network behind a firewall that blocks SSH

I'm trying to SSH into my Raspberry Pi, which is on the same wireless network as my SSH client. My firewall blocks SSH connections. I changed the sshd listening port in my Raspberry Pi to 80 like ...
1
vote
1answer
427 views

iptables blocking all traffic even with ports opened

Simple as I can put it: I can't access my servers with iptables enabled, with default rules. Need to disable iptables to get access. Trying to find the cause. Only difference in setup type is layer3 ...
1
vote
0answers
109 views

Conntrack/NAT's port mapping for a specific port breaks whenever that port's service is shutdown for too long. How can I fix this?

Linux Gentoo 3.13.6-hardened-r3 #1 SMP Sat Apr 12 09:17:25 EDT 2014 x86_64 Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux hardened with grsecurity and selinux with a strict policy in ...
1
vote
0answers
162 views

Is it possible to route all traffic on VirtualBox host adapters to guest?

I am upgrading Ubuntu 8.04 on a dedicated router/firewall/NAT/SMTP/SSH server with a current Linux (Debian Wheezy). I am using VirtualBox (4.2) with Ubuntu 8.04 as host and the new Debian build as ...
0
votes
1answer
82 views

How to block all applications from accessing a connection in Windows 7 firewall?

I consider myself quite tech-savy but this one gives me real pain. I've connected to VPN through PPTP and I'm attempting to set up firewall rules to block any application from using it. Essentially, ...
0
votes
0answers
206 views

configure iptables to block all(as much as possible) bittorrent traffic

good day all This is my current iptables setup Generated by iptables-save v1.4.7 on Wed Apr 9 13:50:31 2014 *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [0:0] :LOGDROP - ...
1
vote
1answer
53 views

Blocking an IP in Windows Firewall

I am attempting to block a connection to a games' masterserver (see this for more information, including why I am trying to do so), but however redirecting the DNS has not worked, so I am trying to ...
0
votes
1answer
96 views

How to configure sonicwall to allow systems from internet to access dlink ip camera?

I am trying to configure sonicwall to allow access for the ip camera from internet. The camera somehow sends out ARP packets which are being dropped at the firewall. When used packetmonitor to see ...
0
votes
1answer
149 views

What might these connection attemps mean?

Yesterday I opened a port on the router, forwarded to LAN IP 192.168.1.201 and blocked the ADSL company password to access the router. There is no other open port on the router. This log is from the ...
0
votes
1answer
82 views

Block a Subdomain in Windows Firewall

Gamespy is ceasing its Master Server support for many games at the end of May, including Crysis 1, Wars, and 2. I have worked with Crysis 1 and Crysis Wars for a very long time, and now the entire ...
1
vote
0answers
33 views

Juniper Firewall setup

I bought an old Juniper 5GT firewall simply to do some port filtering. I have set the device up in a DMZ zone of my home network, there is a server behind it and it has been assigned an IP by the ...
0
votes
1answer
94 views

IPtables preventing outgoing packets

I am trying to setup firewall rules on a RHEL webserver, so that my webserver can serve up web pages and at the same time download remote files using curl/wget. Problem I am experiencing is I can only ...