FreeBSD is a Unix-like operating system which has grown out of the original BSD (Berkeley System Development) of the early days of Unix.

learn more… | top users | synonyms

1
vote
1answer
104 views

ng_patch and VLAN priority

I have a VLAN interface in FreeBSD 9: vlan34: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=103<RXCSUM,TXCSUM,TSO4> ether xx:xx:xx:xx:xx ...
1
vote
1answer
230 views

httpd running but Apache not listening

How to debug a situation where httpd is running but netstat shows Apache is not listening? This is a server where I run two apaches (v2.2), one for my prod systems and one for dev, with separate IP ...
1
vote
1answer
816 views

FreeBSD portsnap fetch fails

This seems like a really straightforward problem, but I haven't had much luck looking around the internet so far. (A couple message boards are talking about it, but they don't offer any solutions.) ...
1
vote
1answer
229 views

How do I install NanoBSD on a flashdrive?

I would like to install NanoBSD on a flashdrive, I'm on a Linux Machine and don't have an extra machine around. I'm very used to Linux but I'd like to try out NanoBSD on a headless machine of mine. ...
1
vote
1answer
577 views

samba 3.6, group permissions from active directory, "

I'm doing zfs configuration testing, and I'm trying to join a server to our AD domain. So far as I can tell I have successfully joined the domain with SAMBA 3.6. I can query for users and groups. ...
1
vote
1answer
245 views

How can I build Google V8 on FreeBSD with clang?

I'm trying to build Google's V8 on FreeBSD 9.1 using clang and running into the following error: /usr/bin/ld: final link failed: Nonrepresentable section on output clang++: error: linker command ...
1
vote
1answer
370 views

freebsd-update patches custom /boot/kernel/kernel which breaks remote access

I am running freebsd-update from time to time on my FreeBSD 9.0 system. I have a custom kernel installed and running and, according to a tip from the FreeBSD documentation (Freebsd Update (section ...
1
vote
1answer
1k views

How to get CPU %user %system in FreeBSD without using top?

Is there any other FreeBSD command besides "top" which can be used to get the following values? CPU: % user, % nice, % system, % interrupt, % idle My problem to be specific is ...
1
vote
1answer
156 views

FreeBSD jail IMAP/MTA config recommendations

I've got access to my "own" FreeBSD jail. The jail has only basic, unconfigured system, but I have full access to FreeBSD ports, and (jail)root too. Now I need to setup my jail as IMAP/MTA. The ...
1
vote
1answer
2k views

Enable TRIM on FreeBSD 9 Install

I recently upgraded all of the parts in my FreeBSD 9 server. I purchased an SSD to run as a the root drive - I'd like to enable TRIM on it but the only documentation I can find on it is that it can ...
1
vote
1answer
498 views

FreeBSD 8.2 : Can't login x window session (gnome)

Environment: OS: FreeBSD 8.2 64 bit GNOME: I don't know how to check gnome's version in console. I install it from the latest port collection via internet. Issue: Each time I boot the OS, it ...
1
vote
1answer
482 views

FreeBSD 8.1 on MacBook 5,2

I've been trying to dual-boot FreeBSD 8.1 with Mac OS X on my MacBook (5,2), but am having trouble trying to get the live cd to boot. I reach the FreeBSD Boot Loader Screen with the options for boot, ...
1
vote
1answer
477 views

Installing FreeBSD/mfsBSD remotely? whats up with the config?

I have a ubuntu box which I currently cannot get to since its across the continent. I need to install FreeBSD on it and it hopeless to guide onsite people through this. I looked around and found ...
1
vote
1answer
2k views

Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is ...
1
vote
0answers
299 views

Kernel panics in FreeBSD 9.1 virtualbox

I'm regularly encountering a kernel panic on my FreeBSD 9 laptop. I have installed virtualbox host and trying to run CentOS as guest. When perform "yum repolist" guest crash's my freebsd host. Here ...
1
vote
0answers
244 views

Did I kill windows boot manager? I can't boot after installing FreeBSD

I installed freebsd with dual-booting. I specified an empty partition for freebsd auto-configuring. After it was installed, windows boot manager disappeared. What's going on? Should I recover it, or ...
1
vote
0answers
119 views

mod_security 2.6 + mod_fcgid not working

I have installed: Apache 2.2 + suexec (libxml2, etc.) Mod_security 2.6 Mod_fcgid I am using APACHE with newest hybrid EVENT MPM. I think it can be related to the problem. Here is the problem: ...
1
vote
0answers
360 views

Virtual Machine Got Frozen on start of installing FreeBSD, on CentOS6.3 KVM

Problem description: In the installation section, after I entered the virt-install command with proper arguments(shown below) to build the virtual hardware configuration, and connected to the vm ...
1
vote
0answers
319 views

Remote GVIM with Xming hangs when lost and restored focus

I have a following setup: a Windows 7 laptop with Xming installed and FreeBSD with GVIM in VirtualBox. I set up everything (set DISPLAY env variable, opened ports, allowed Xming to accept connections ...
1
vote
0answers
300 views

hard disk partition for Arch Linux and FreeBSD

I want some advice on how to make the partition for Arch Linux and FreeBSD. I want the two systems to share a swap partition, but I don't know if it can work. And I also want a partition to share data ...
1
vote
0answers
424 views

Mouse back/forward buttons in FreeBSD under VMWare Workstation

VMWare Workstation 7.1.4 Host: Windows 7 (laptop with touchpad). Guest: FreeBSD 8.2-STABLE (yesterday's) vmmouse driver: 12.6.9_1 (from ports) The problem: xev doesn't see mouse back/forward ...
1
vote
0answers
222 views

Running emacs in GNU Screen overrides .emacs settings for [home] key binding in FreeBSD 8.2

If I use the following .emacs file, I am able to go to the beginning/end of the current line using the home/end keys as I would expect. (keyboard-translate ?\C-h ?\C-?) (add-to-list 'load-path ...
1
vote
0answers
414 views

Install4j, how can I fix “Exception in thread ”main“ java.lang.NoClassDefFoundError: com/install4j/runtime/launcher/Launcher”

I've just downloaded install4j version 5, as my previously working version 4 no longer works with my new JRE, but now I can't get it to do anything other than this: Exception in thread "main" ...
0
votes
0answers
23 views

Airport Extreme BCM43224 not recognised on FreeBSD

So I have recently installed FreeBSD 10.1 (now UEFI native!) on my Mid-2012 MacBook Pro. The install went fine, except for one problem: my wireless card wasn't recognised. I looked into bwi and bwn as ...
0
votes
0answers
80 views

How to fix timezone data in pfSense/freeBSD?

We have special situation with timezones here in Russia. Recently government had cancelled timesave shifting and it was no timeshifts for some time, but recently they decided to make one "last" ...
0
votes
0answers
22 views

CPU Utilisation Snapshot report

I want to write a script to monitor CPU Utilisation, and upon the utilisation going above a threshold, create a brief text report on the router. I'm trying to get the the bottom of why some of our ...
0
votes
0answers
18 views

unable to boot ahter instalation : freeBSD

I have ubuntu installed in my system. I just installed freeBSD 10.0 in to my system. Where /dev/sda1 is where my ubuntu is installed , and /dev/sda2 is where I install freeBSD. Installation of ...
0
votes
0answers
23 views

Limited Broadcast on FreeBSD 10

It seems to me that limited broadcast is broken on FreeBSD 10.0-STABLE. My setup: FreeBSD server (FreeBSD server.home.local 10.0-STABLE FreeBSD 10.0-STABLE #0 r264752: Tue Apr 22 22:09:47 CEST 2014 ...
0
votes
0answers
232 views

Squid ignores multi-WAN load balancing in pfSense

If squid3 package is installed and configured as transparent proxy, then load-balancing gateway group is ignored. I.e. if some ISP is down, then some web pages can't be opened and not routed to ...
0
votes
0answers
54 views

ssh port-forwarding and remote bind failure: ExitOnForwardFailure not working?

I have two FreeBSD 9 hosts and I want to maintain a tunnel to reach firewalled host R from a high port on cloud host C. ssh -y -i tunnel_id_rsa -o ConnectTimeout=60 -o ServerAliveInterval=20 -o ...
0
votes
0answers
85 views

FreeBSD em0 fallback to 100Mbit Fast Ethernet on HP/Compaq DC7700

I have a couple of HP DC7700CMT machines, each with its own integrated Intel 82566DM GbE LAN port, shown in dmesg as Intel PRO/1000 and using the em driver. I recently discovered that FreeBSD doesn't ...
0
votes
0answers
59 views

Dual-Boot Windows XP and Vista Without Windows Boot Manager?

I have been dual-booting FreeBSD (1st partition) and Windows XP (2nd partition) using Grub2 (configured in FreeBSD). I just installed Windows Vista on my hard drive's 3rd partition. To boot Vista I ...
0
votes
0answers
58 views

How to use omprog module of rsyslog on FreeBSD?

I am using FreeBSD 8.3 and have installed rsyslog server on it. and I want to use the omprog module of the rsyslog server. How to use omprog module? I have successfully tried it on Ubuntu but I ...
0
votes
0answers
86 views

Sendmail + Active directory

I've got a freebsd server which has sendmail, dovecot and openldap installed. Let's say it's called name.com I want to integrate it with Active Directory, so sendmail can look up users in AD and if ...
0
votes
0answers
150 views

Samba root preexec not running?

I can't seem to find the solution to this anywhere. I have a FreeBSD 10.0-RELEASE-p6 system running Samba 4.1.9. I'm trying to set up a [home] share where each user will be mapped to a zfs dataset ...
0
votes
0answers
53 views

Idle timeout Bourne-style shell

Is there any way to timeout idle users in Bourne-style shell (/bin/sh). man sh does not talk about it. http://www.freebsd.org/cgi/man.cgi?sh TIMEOUT or TMOUT shell env variables in /etc/profile ...
0
votes
0answers
213 views

how to access freeBSD samba from windows 8

I am trying to connect freebsd samba from windows 8. but, the windows say error for authentication. the freebsd runs samba41. sobelow is my smb4.conf. [global] workgroup = WORKGROUP server string = ...
0
votes
0answers
118 views

Entire ESXi 5.1 server locks up since yesterday

Since yesterday I suddenly stumbled upon a very absurd problem. My setup is an ESXi 5.1 home server with two VMs: a Debian (for mail, printing, webhosting, telephony, and more) and a ZFSGuru (FreeBSD ...
0
votes
0answers
113 views

freenas fuse-s3fs kldload “operation not permitted”

I am trying to install fusefs-s3fs on a pluginjail in freenas when i try to start fusefs i get the following error about not being able to load kldload can some help with this please.. $: ...
0
votes
0answers
109 views

FreeBSD 10.0 upgrade network interface not working

FreeBSD noob here. I have upgraded from FreeBSD 9.1-p11 to 10.0-RELEASE and am having problems with the network interface during boot. It seems that something goes wrong with loading the driver or ...
0
votes
0answers
31 views

Freebsd pkg init by script

On just installed Freebsd need to initialize pkg by hands. Otherwise pkg system not allowed. How to init pkg automatically by script? Maybe need install someone port? Or something else?
0
votes
0answers
131 views

VirtualBox VM “pauses” indefinitely when mounting ntfs rawvmdk as read-write

I've ran into several interesting issues when mounting an NTFS partition in FreeBSD and Linux. My server is running Windows 7 Ultimate and VirtualBox ver. 4.3.6. There is a reason why it's running ...
0
votes
0answers
104 views

Simplest FreeBSD SSH (-w) VPN setup for RoadWarrior

I'm looking for the simplest FreeBSD specific example of configuring an OpenSSH VPN (using -w) that will route all traffic not destined for the clients local network over the VPN. An example scenario ...
0
votes
0answers
214 views

Convert disk with FreeBSD disklabel to MBR or GPT?

I've got a disk that was once partitioned using only a FreeBSD disklabel. The MBR is all 0. The BSD partitions (as dumped by gdisk under Linux) are: BSD partitions: 1 16 ...
0
votes
0answers
127 views

Samba on FreeBSD 8 and Window 8

My objective is shared files form FreeBSD8. I have installed Samba36 using ports on FreeBSD in order to automate installations. I have edited the /usr/local/etc/smb.conf and /etc/rc.conf files with ...
0
votes
0answers
486 views

Avahi quits working after a few minutes on FreeBSD/FreeNAS

As I mentioned in another post, I've set up a portsjail on FreeNAS 9.1.1 (FreeBSD 9.x) with CUPS and avahi. I'm trying to set up AirPrint support. I've gotten to the point that a Mac can see the avahi ...
0
votes
0answers
336 views

CUPS Auto-Discovery Not Working on FreeBSD/FreeNAS

I've set up CUPS within a portsjail on my FreeNAS 9.1.1 (FreeBSD 9.x) system. In the jail, I have installed the ports for cupsd, avahi, mdns and hplip. Unlike when I setup CUPS on a Linux system, when ...
0
votes
0answers
32 views

Is there a way to expose ports when the three default firewalls were disabled

I think I disabled the three firewalls that come with FreeBSD (just for experimentation purposes). I checked the modules that load with the kernel (using "kldstat"). The only modules that load are: ...
0
votes
0answers
127 views

Use of TCP-MD5 option

For a research application we need to use the TCP-MD5 option (RFC 2385). After some research we have finally found that only a few GNU/Linux distributions support the option out of the box. We ...
0
votes
0answers
603 views

FreeBSD file group write permissions

I have created a dummy file just to test out group permissions. touch /path/test.txt chown user1:txtwriter /path/test.txt chmod 664 /path/test.txt && ls -la returns: -rw-rw-r-- 1 user1 ...