1
vote
1answer
180 views

L2TP/IPSec stopped working after openssl upgrade

VPN connections from my MacBook / iOS devices to a Debian server having openswan / xl2tp were working just fine until I used apt-get to upgrade everything due to openssl heartbleed announcement. Now ...
0
votes
1answer
30 views

IPSec with or without L2TP?

I'm referring to this question. And to be clear: This is really not about the old PPTP vs L2TP debate. ;-) I successfully set up racoon as an IKE server without any L2TP implementation running and it ...
0
votes
0answers
50 views

IPSec Policy Is Blocking 127.0.0.1

I created an IPSec policy on Windows 8.1, it's purpose was to allow only traffic that goes via the VPN, everything else should be blocked (except LAN and 127.0.0.1). LAN is working fine, but 127.0.0.1 ...
0
votes
0answers
15 views

Can I run a VPN server with certificates only, and no password/pre-shared keys?

I've seen several writeups around discussing VPN server configuration. In all of them, there are 2 or 3 pre-shared keys / passwords used at various levels of the tunnel -- one for IPSec, one for ...
0
votes
0answers
27 views

Shrew VPN with Cyberoam security gateway

it is possible to establish a VPN tunnel with Shrew VPN to a security gateway Cyberoam ? (Ipsec / SSL) I can not establish the tunnel.
0
votes
0answers
93 views

How can I set an IPsec ID using the Windows 8 built-in VPN client?

I'm trying to connect to a VPN using the built in Windows 8 VPN client. The VPN uses L2TP/IPsec and a pre-shared key. I can see it's connecting to the VPN but not making it through authentication. I ...
0
votes
0answers
248 views

In Windows, Is there any way to connect to IKEv1 IPSec server, without using L2TP tunnel?

My server uses StrongSwan to host an IPSec server using IKEv1. Platforms such as Android, iOS, MacOS natively support IPSec connection without using external client application. Windows 7 and 8 seem ...
0
votes
1answer
51 views

Logging VPN Traffic (L2TP/IPSec on Ubuntu)

I'm running a small, private VPN server for me and 2-3 other people. For bandwidth monitoring, and to comply with any possible DMCA or other government (re: new Canadian law) requests, I want to have ...
0
votes
0answers
57 views

Logging VPN Access (L2TP/IPSec Ubuntu)

I'm running a small, private VPN server for me and 2-3 other people. For bandwidth monitoring, and to comply with any possible DMCA or other government (re: new Canadian law) requests, I want to have ...
0
votes
0answers
17 views

Assign user from outside the company to access without creating a profile?

I have set up a VPN using Win 2008 server and assigned group policy to the user who already been added to the Active Directory to access from outside the company specific services. What do I need to ...
0
votes
0answers
85 views

Slow SCP tranfers over IPv6 VPN IPSec which has IPv4 private subnets

I have 2 hosts connected with IPv6 VPN. I am using IPv4 internal addresses for machines connected internally and use subnets addressed for these in ipv4. When a host wants to scp a 1 Gig file pull ...
0
votes
1answer
168 views

How is it possible that I can't login to various websites when using a VPN at a public Wi-Fi? That same VPN is just fine when connected from home

This is a full IPSec tunnel provided by my university. I use this VPN at home and at public Wi-Fi caf├ęs. For some reason, I am not able to login to most websites while using the VPN at this specific ...
0
votes
1answer
200 views

VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

Firstly, is this possible? The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual server with one network card running windows ...
0
votes
1answer
717 views

Strongswan IPSEC VPN for Windows 7 road warrior config

Following the Strongswan wiki link for configuring Strongswan for Windows 7 clients: http://wiki.strongswan.org/projects/strongswan/wiki/Win7EapMultipleConfig I used the sample files as-is with no ...
0
votes
0answers
2k views

Openswan l2tp ipsec vpn on Ubuntu 13.04 for remote access (Android road warrior). Does not work

I followed the directions from here: http://samsclass.info/ipv6/proj/proj-L5-VPN-Server.html I used the same exact files as posted at that site. On my router, I have port-forwarded 500 UDP and 4500 ...
0
votes
0answers
230 views

Recover L2TP/IPSec Preshared key

I want to recover my L2TP/IPSec Password, which is somewhere stored in my Computer, but I do not know where it is saved. I use this to connect to my VPN connecion, I tried lots of password Recovery ...
0
votes
0answers
526 views

Mikrotik IPSec VPN routing

I seem to be clueless at the routing with VPN. I am trying to setup an IPSec VPN tunnel so as to secure communication between my private LAN and a destination host. Any device within my private LAN ...
-1
votes
1answer
533 views

Is my VPN tunnel connected? Is my traffic going via the VPN tunnel? How do i verify this?

From RHEL i have to connect VPN server and reach that target PC1. Till now it was possible to make the VPN interconnect but 10.0.0.108 cant ping 10.109.0.200. Variables: ME WAN IP: 8.8.8.8 (Amazon ...
0
votes
0answers
41 views

Configuring VPN in a router which supports IPSec

I want to create a VPN for my own use. I see that my D-Link router supports IPSec. Is it possible to configure a private VPN if IPSec is supported? How to setup a private VPN in a router and use it in ...
2
votes
1answer
1k views

Find the IPsec ID and Secret id for my vpn connection

Hi i'm using ubuntu and new to cisco vpn anyconnect client. I have installed it successfully and establish the connection by giving the user name and password. But it is showing the timeout error. So ...
0
votes
0answers
107 views

Configure L2TP IPSec on Mac using command line

I have a bunch of IPSec VPN servers I'd like to add on several mac clients ... is there a one-line I can execute from the console, or a simple way to do this in an automated fashion to save time? ...
2
votes
0answers
98 views

Forward IPsec tunnel from IPv4 endpoint to IPv6 endpoint

I have a new ISP and only have a Dual Stack - lite connection now. That means I can't access my router via IPv4 anymore, since the external IPv4 address is private. I have native IPv6 connectivity. ...
0
votes
0answers
37 views

Nat IP to another

Is it possible for me to NAT one IP to another, I'm connecting in site-to-site VPN via windows2003 machine it have different IP say 172.19.0.1 and I'm required to present my IP as 192.168.x.x on the ...
3
votes
1answer
169 views

VPN for Home to watch TV on the go

My ISP offers TV on tablets, phones, etc. where I have to use an app, but I still have to have that traffic flow through my modem. What would be the best solution to setting up a VPN for probably just ...
0
votes
0answers
154 views

How to make cisco VPN client work on win 7?

I've managed to setup a IKEv2 VPN(EAP-MSCHAP v2) for my win 7 64bit, everything works all right and the connection is made through native VPN setups in win 7. But right now I want to make it work for ...
2
votes
1answer
1k views

Finally get my win 7 connected to strongSwan VPN, but there's no Internet

I believe I've followed all the instructions, and my win 7 did get connected, but there's no Internet. Background: Server OS: ubuntu 12.04 on linode xen VPS strongSwan Version: 4.6.4 ...
0
votes
1answer
498 views

How to set up NAT in windows server 2008 r2 for IPSec tunnel use

I am having troubles setting up the whole IPSec tunnel thing. What i have: 1. Router that only has a VPN/IPsec passthrough functionality (IP 192.168.0.1) 2. Windows Server 2008 R2 which has group ...
0
votes
2answers
1k views

Can't connect to pc using Remote Desktop over VPN with Domain user account only

Craziest thing. I can't seem to login to my pc at work using my domain credentials. I am using Remote Desktop with a Cisco VPN and have tried both Mac and Win 7 remote machines. It appears that I can ...
2
votes
0answers
1k views

How do I configure DD-WRT to forward IPSec traffic to an internal server to support a road warrior configuration?

I use dd-wrt as my home router setup and that's been working fine. Now I wanted to figure out a way to be able to use my iPad to set up a IPSec tunnel to my home network while I'm on the road. PPTP ...
2
votes
1answer
332 views

Is it possible to set up IPSec on a linux virtual machine host to connect to an Azure virtual network

We run some virtual machines in an onsite Ubuntu based server with guests being a mixture of Windows Server and Ubuntu. We're also setting up some Windows Azure virtual machines and ideally would like ...
1
vote
0answers
82 views

Netgear NAT over LAN TO LAN

I have the following question: I need to connect through a vpn IPsec lan 2 lan tunnel with a partner but they want that I connect through a specific ip subnet which is not mine. Here's the situation: ...
1
vote
0answers
420 views

Shrew Soft VPN Client - Negotiation timout

I am having an issue running Shrew Soft VPN Client on Windows 7 Pro x64. While trying to resolve this issue I have disabled miniport adapters like a lot of websites say to do however this hasn't ...
1
vote
1answer
861 views

Cisco ASA5505 site-to-site VPN doesn't establish tunnel to remote peer

The remote peer can start the tunnel successfully when accessing my local network like pinging a local host, however, the tunnel cannot be automatically started from the local side. The log shows no ...
0
votes
1answer
1k views

Openswan L2TP/IPsec VPN for iPhone fails during connection

I spent the morning trying to configure an L2TP/IPsec VPN using Openswan and xl2tpd on a Debian Squeeze server for use by a mix of iOS and Mac clients. I am trying to set it up using pre-shared keys ...
0
votes
2answers
108 views

IPsec counter mode - are there implementations?

Counter mode encryption is potentially more robust against lost packets. It is used in SRTP. I assume that if I use counter mode, a lost packet causes a lost UDP packet or TCP retransmission instead ...
1
vote
1answer
541 views

Can IPSec (or any other VPN tunnel) hide your IP address while browsing?

Is there a VPN/tunnelling method which you can use to browse the web, but will also prevent somebody from seeing your IP address if they were sniffing the network? I wasn't sure if the IP address ...
0
votes
3answers
329 views

Something regarding internet browsing using an IPSec VPN?

Something is causing me a real headache: If my workplace offered a wireless internet connection, at the workplace, using VPN (assume it's IPSec for now). If I were to connect, I presume on the other ...
6
votes
2answers
2k views

How to auto save a Cisco VPN connection password on Mac OS X?

I have set up a Cisco IPSec VPN connection instead of using the Cisco client on Mac OS X. I like it fairly well, it just sits in the tray next to the clock and allows me to easily connect and ...
1
vote
1answer
210 views

VPN back to home network for secure IP traffic?

I'd like to set up a VPN running somewhere on my home network that would enable me to securely tunnel all Internet traffic through it from an untrusted network. That way, I could browse sensitive ...
0
votes
2answers
627 views

Macbook Pro unable to use the internet while connected to IPSec VPN

Short Question Is there something I am missing when setting up a Cisco IPSec VPN connection that redirects all traffic over the VPN? Background When I am connected to the VPN, I can browse our ...
2
votes
2answers
2k views

How to connect to an IPSec VPN through a LinkSys WRT54GL?

I am having trouble connecting to a L2TP IPSec VPN when I use my wireless router. I have a LinkSys WRT54GL v1.1 wireless router with the most current version of tomato (1.28). I have no issues ...
0
votes
1answer
3k views

setup L2TP on Ubuntu 10.10

I'm following this guide to setup a VPS on my Ubuntu VPS: http://riobard.com/blog/2010-04-30-l2tp-over-ipsec-ubuntu/ My config files are setup as in that guide, openswan version is 2.6.26 I think.. ...
1
vote
4answers
13k views

Connecting to a Checkpoint VPN-1 from Snow Leopard?

Checkpoint SecureClient doesn't work with Snow Leopard, so I've been looking for some other options. VPN Tracker appears to work, but lacks username/password (XAUTH RSA) authentication support (PSK ...
2
votes
3answers
1k views

Windows 7 RTM IPSec VPN

I'm running Windows 7 Ultimate RTM 64Bit and need an IPSec VPN client, I've tried Shrew VPN but that caused a BSOD. I've noticed there is a VPN option in the start menu but I'm not sure if it is ...