1
vote
1answer
56 views

NAT in local IPv4 to extern IPv6

I have a cable router with an outgoing IPv6 address. In my lan I have IPv4 addresses. I want to access to my local server from internet. I am not familiar with IPv6, is there something like NAT? ...
-2
votes
1answer
70 views

Why are we still stuck on IPv4 when we are IPv6 ready? [closed]

With IPv4 finally just about out, why is it so hard to switch over to IPv6? My entire home network is IPv6 and the switch over was easy. Is it a hardware problem that keeps IPv6 from taking off? From ...
0
votes
0answers
196 views

Default Gateway IPv6 but IP set on IPv4

I have a client who has a network setup. I have a couple of devices which work on the network using socket communication which I want integrated onto their network. There is a PC which is to be made ...
0
votes
1answer
182 views

How to deal with Dual-Stack Lite and incoming connections

My ISP (german cable ISP Unitymedia) forced me to use DS-Lite / Dual Stack Lite because he ran out of IPv4 addresses. Common problems with that setup are: interrupted connections (i.e. in online ...
2
votes
1answer
99 views

IPv6 only LAN with NAT64 router for Internet

I want to disable IPv4 on my LAN and run only IPv6. I will use a NAT64 Juniper firewall to provide Internet access since I only have IPv4 Internet. Will this break applications? Will I be able to ...
0
votes
0answers
42 views

Use rtpproxy as a NAT on openIMSCore

I have some problems, I want to ask about rtpproxy and OpenIMSCore server. Actually I want to make IMS running like this: client IPv4 -- > OpenIMS <-- ipv6client. I want to use RTPProxy as NAT, so ...
1
vote
2answers
85 views

Can IPv6 traffic pass over an IPv4 network? [closed]

Consider the case where there are 2 computers using the IPV6 protocol that want to communicate with each other, and the packet(s) must pass through a network that uses the IPV4 protocol. Can the ...
1
vote
1answer
70 views

What is the difference between IPv4 and IPv6 in terms of binary?

I know this question is for entry level users. That I am. New to this world and finding it very interesting. I have done some research on IPv4 and how to convert IP addresses to binary and vice versa. ...
0
votes
1answer
576 views

Dynamic DNS for both IPv4 and IPv6 (using freedns.afraid.org or others)

I want to set up dynamic DNS on my Fritz!Box 7490, so that it is reachable both on IPv4 and IPv6. Note that I want to reach the Fritz!Box itself, and not a computer behind it. The scenario is that I ...
0
votes
0answers
27 views

Block IPv4 peers in deluged?

Is it possible to block all IPv4 peers and allow only IPv6 peers in deluged? Or can I modify torrent file to accept only IPv6 peers?
0
votes
0answers
845 views

No DNS requests in Windows 7, nslookup works, ping and tracert can't resolve

I was trying to bring my old desktop computer back from the dead and faced a problem I couldn't deal with. The main issue is what I've written in the title - nslookup works, ping and tracert give a ...
-2
votes
1answer
445 views

Comcast Speed test slower performance on the IPv4 test than on the IPv6 Test

I have two computers. On one I get the same performance result for both IPv4 and IPv6. On the other I get slower (about 50%) on IPv4 than on IPv6. Why? Is there a config to change it?
0
votes
2answers
411 views

IPv6 connection through IPv4 network without internet-connection

I'm working at a project at my university and now the following problem shows up: We got a Server [Server] with a private IPv6 network. Some sensors (temperature, humidity...) are connected through a ...
0
votes
1answer
73 views

Addressing computers via ipv6 on local network [duplicate]

I'm very confused about how to address a computer on my local network via ipv6. I am writing a server which is meant to support both ipv4 and ipv6. Now I have don an ifconfig and gotten my ipv4 local ...
0
votes
1answer
134 views

Setup IPv6 over IPv4 tunnel in VPN

Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B ...
0
votes
1answer
579 views

OpenVPN 4in6 or 4over6 tunnel

My ISP sucks. It gives me an IPv6 Address and an IPv4 one, but IPv4 is down 50% of the time (I can't access any IPv4 Services every 10 minutes)... As I already have an OpenVPN Server set up, I asked ...
0
votes
1answer
433 views

How to set up a IPv6 to IPv4 gateway for VPS [closed]

Condition IPv6 and IPv4 enabled VPS IPv6 and IPv4 enabled Client(Could be PC or Mac) Problem Client get restricted IPv4 connection whereas IPv6 connection is unlimited. Solution Client connects ...
1
vote
1answer
102 views

In tspc ipv6 tunnelling, does tunnel broker required for ipv4 to ipv4 communication?

I am new in embedded systems and trying to add support the ipv6 network availability in my new product but I have understood that, First of all, My system is connected to IPv4 ISP and I want to ...
4
votes
1answer
158 views

Get IPv6 address of an IPv4 machine?

Given two machines on a local network, both connected via IPv4 and IPv6, can machine A get the IPv6 of machine B if it has machine B's IPv4 address? I presume the ARP cache should be able to provide ...
-2
votes
2answers
110 views

How to Get the size of IPv6 header? [closed]

I know there is IHL field in IPV4 which is Internet Header Length.Since an IPv4 header may contain a variable number of options, this field specifies the size of the header. But there is no IHL or ...
1
vote
1answer
2k views

6to4 vs ISATAP vs Teredo Adapters

I understand that all three adapters mentioned in the title are related to transitioning IPv4 to IPv6. ISATAP: Transmits IPv6 packets between dual-stack nodes on top of an IPv4 network. Teredo: IPv6 ...
0
votes
4answers
9k views

How can I figure out what IPv6 to use if I want to set a static IP for my computer?

I recently installed Windows Server 2012 on my desktop. I changed my connection settings to hardcode my internal IP address as 192.168.0.99 (IPv4). Windows Server 2012 warned me that I should also set ...
5
votes
1answer
210 views

Is there a way to test alternate IPv4 routes?

i am using Hurricane Electric's Tunnel Broker service to get IPv6 connectivity. TunnelBroker lets you have access to the IPv6 Internet by using a standard IPv6 tunneling protocol. You send IPv6 ...
0
votes
1answer
139 views

Connect to a ipv4 site with ipv6

Is there a way to connect to a ipv4 website using an ipv6 proxy? cause I have vps that only has ipv6 so I want to setup a proxy server using ipv6 only but want to connect to ipv4 websites
4
votes
1answer
207 views

How to block a program from using IPv4?

I have a program that can communicate over IPv4 (TCP and UDP) and over IPv6 (TCP and UDP). I want to block the program from being able to use IPv4. I tried the Windows Firewall: Except it blocks ...
1
vote
1answer
940 views

How do I access IPV6 from IPV4?

I have been searching for a long time ipv4 to ipv6 proxy program but i nothing found... Currently i have IPv4 address however i would like to try IPv6 address. Is there a simple solution for IPV6 ...
6
votes
3answers
1k views

4in6 tunneling (via OpenVPN?)

I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection ...
2
votes
1answer
368 views

Prefer IPv6 over IPv4 in Windows Server 2003

I am running Windows server 2003 and my Firefox browser keeps using IPv4 instead of IPv6. Well at least http://ipv6-test.com/ says that my browser uses IPv4. How can I force it to prefer IPv6 over ...
3
votes
1answer
261 views

Can I prioritize IPv6 traffic over IPv4 traffic on Linux?

Is there a way I can give traffic over IPv6 a higher priority than traffic over IPv4? Purpose is 2-fold: Promote IPv6, and be able to connect even when my server is swamped by IPv4 users.
9
votes
1answer
19k views

How to force Java to use IPv4 instead IPv6?

My Java browser plug-in is no longer working. When I open a page that has a Java element, Java cannot connect to the server. After investigation, I found that Java was trying to use IPv6, while my ...
5
votes
1answer
1k views

IPv4, IPv6 and IPTables

I have just recently learned that even if I block all traffic to my webserver using iptables it is still vulnerable to external attacks via IPv6. In my understanding, this renders iptables-only ...
13
votes
8answers
74k views

Why do I get “General Failure” when pinging host name on a Win 7 node on the network?

This is a very peculiar problem with a station on our network. The client pc is running Windows 7 Pro. What makes this problem interesting is that this client is the only node on the network that ...
7
votes
4answers
2k views

Does disabling IPv6 decrease my surface area of attack and increase performance?

I have colleague that is on this whole kick of disabling IPv6 while leaving IPv4 on each new machine that comes in before deploying in our environment. He takes his personal anecdotal evidence and ...
0
votes
3answers
402 views

Since IPv6 has larger addresses than IPv4, how will that affect performance?

IPv4 are 32 bit addresses, while IPv6 are 128 bit. It's 4 times larger, sure on a small scale maybe not a big difference, but on a world wide scale will it make a difference? Are their any messures ...
7
votes
2answers
5k views

How do client applications know to use IPv4 or IPv6?

How do servers/computers/users/applications know to request a resource over the Internet with an IPv6 address vs. and IPv4 address?
-1
votes
1answer
251 views

I can not see ipv4 and http, I can just see ipv6 and SSDP [closed]

I have a real huge problem, when I am connected through the wireless of my university, I can just see adresses like this : 1823731 14856.287768 fe80::74b6:2d79:4343:41e1 ff02::c SSDP ...
1
vote
1answer
323 views

What are the equivalent IPV6 versions of IPV4 special-use adresses?

I'm trying to make a private network with 5 computers bellow an external ADSL router with NAT, but internally I want to use IPV6. To do this I need to use private special-use IPV6 addresses, such as ...
1
vote
1answer
670 views

Can't access my shared folder by ipv4, only ipv6 and name

How to make possible to access to shared folder on win7 machine by ipv4? as my linux machine needs it. The problem is in fact that i can't access by ipv4 to this folder even from this win7 computer, ...
1
vote
2answers
947 views

Can't ping Linux IPv6 address from Windows XP

I gave an IPv6 address to my SUSE Linux machine on a VirtualBox VM with ifconfig eth0 inet6 add ... I can't ping that address from Windows XP (vice versa) The address of the Linux machine is efbb::26 ...
1
vote
2answers
9k views

How can I make localhost resolve to 127.0.0.1 instead of ::1?

When I ping localhost the address resolves to the ipv6 loopback of ::1 My MySQL and Apache installations expects the ipv4 address of 127.0.0.1 How can I configure my WindowsXP to resolve localhost ...
1
vote
3answers
1k views

Should I use a static IP address? If so what kind?

Last night I managed to get my local PC running as a server using port 80 and my IP address. After restarting my machine it stopped working. I was told I need to make a static IP address. My ...
3
votes
4answers
3k views

How do I properly access Google through IPV6?

I'm trying to access Google through IPv6. However, it seems to want to send me back to IPv4! I did a DNS lookup on IPv6.google.com at http://centralops.net/co/ and found their IP, then tried this... ...
2
votes
1answer
445 views

Using router public IP to access another (located in WAN) router behind NAT

I have following setup: at home I have a router up and running with public ipv4 ip at my country house I have ipv4 cam and router which is behind NAT - no public ip (public ip is too expensive) both ...
0
votes
0answers
343 views

Windows 7 64bit, great signal strength IPv4 & IPv6 can't connect

For some reason I can't connect to the internet with my wireless card (internal) on my PC, I am connected just fine on my laptop. It says my signal strength is good but both my IPv4 and IPv6 can't ...
5
votes
1answer
3k views

IPv6 Tunnel via Own Linux (IPv6-connected) Server

Unfortunately, there's a lot of IPv6 tunnel brokers, and their documentation often clutters the search results for how to setup your own IPv6 tunnel. I have a Linux server with IPv6 connectivity. I ...
1
vote
2answers
379 views

Should I get a gigabit router with or without ipv6 support? [closed]

I'm in the process of getting a gigabit router so i can transfer files faster to and from my Lacie Network Space. I found a gigabit Router. Its performance is really good, however it doesnt support ...
3
votes
2answers
2k views

Should I get a router with ipv6 support?

I'm in the process of getting a new gigabit router so I can transfer files faster to and from my Lacie Network Space. I found Asus RT-N56U Wireless N Dual Band Gigabit Router. Its performance is ...
2
votes
4answers
6k views

Ping myself, works with ipv6 not ipv4 in Windows 7

I've tried to solve the following problem with no luck and I need some proffesional help. The following is possible: Ping all computers (that I tried) in the domain without problem. Ping myself ...
9
votes
5answers
2k views

Does NAT provide security?

I'm following discussions about the IPv4->IPv6 transition, and IPv6 doesn't seem to like NAT at all. I've always thought that NAT was helpful in v4 for some security, I know it doesn't really hide ...
2
votes
2answers
83 views

Wireless Internet is “Unidentified”?

My laptop wireless refuses to connect with my wireless adapter. It says signals all good and ip address is cool, but my ipv4 ad ipv6 connectivity is "no netwok access". What do i do with that?