Refers to the 4th revision of the Internet Protocol, where addresses are usually displayed in the form: 192.0.2.235

learn more… | top users | synonyms

0
votes
1answer
29 views

Listen to localhost messages

Suppose a TCP/IP client application has connected to a certain port on a server. Both client and server are operating on localhost. Is it possible for another application (also on localhost) to ...
0
votes
1answer
65 views

multiple static IP address

I am trying to setup 2 external static IP address through a Arris Modem/router bridged to 2 router so I could split pc network and server network. How would I go about setting it up properly/ if it is ...
0
votes
1answer
272 views

Timeout on Specific IP Address

I'm thomas and I have a weird Problem with my Network/Internet Connection: It's one specific IP(85.10.200.167) I'm unable to connect to. The IP is public in the Internet and works well for many ...
0
votes
1answer
112 views

IPv4 interface number

I came across a question in Self Test Software for MS Exam 70-642 Which command adds route to destination server, with IP address 10.51.0.0 and subnet mask of 255.255.0.0. Next hop should be 10....
0
votes
1answer
47 views

Why doesn’t Windows Vista get an address from the DHCP server?

My Windows Vista PC does not get an IPv4 address from the DHCP server; viewing the network properties shows something (likely the DHCP request) being sent, but no packets being received. Manually ...
0
votes
2answers
630 views

Two IPv4 adapters in same PC on same network valid?

Is it valid to have two network adapters on the same PC have the same network portion in their IPv4 address? If not why is my DHCP server doing so and how should I setup my DHCP server to have it ...
0
votes
2answers
598 views

What does a network packet consists of?

I know basic networking but I am not very good at it. Now I am calculating how many packets will be lost if I use UDP over IPv4. I can assume that the protocol overhead for data sent via UDP over IPv4 ...
0
votes
2answers
300 views

How to find largest possible IPv4 network within specified range

Let's say, we are given a range of 192.168.101.64 - 192.168.102.128. What is the easiest way to find the largest possible IPv4 network within specified range, including network address, subnet mask ...
0
votes
2answers
59 views

Ways to differentiate between home and office private network

Let us consider there are two networks 1) home network and 2) office network. I have an application which will get the system IP and MAC Address of the installed machine while launching the ...
0
votes
1answer
323 views

Enable IP(v4) forwarding on Linux Mint

How do I enable IP forwarding on Linux Mint? When typing the following commands in the terminal as superuser I got the following output: DALEK zermacr0yd # sysctl net.ipv4.ip_forward net.ipv4....
0
votes
1answer
750 views

How to set up a IPv6 to IPv4 gateway for VPS [closed]

Condition IPv6 and IPv4 enabled VPS IPv6 and IPv4 enabled Client(Could be PC or Mac) Problem Client get restricted IPv4 connection whereas IPv6 connection is unlimited. Solution Client connects ...
0
votes
1answer
328 views

One public IP for dedicated server - a few VPS with the same IP?

I bought a dedicated server. To him I got a single public IPv4 address. On this dedicated server I installed the latest version of VMware ESXi hypervisor. With the help of the hypervisor, I plan to ...
0
votes
1answer
205 views

Connect to a ipv4 site with ipv6

Is there a way to connect to a ipv4 website using an ipv6 proxy? cause I have vps that only has ipv6 so I want to setup a proxy server using ipv6 only but want to connect to ipv4 websites
0
votes
1answer
71 views

ipv4 zeroconf dnssd ip adresses after reboot

If you have a network and some devices with valid ips configured by either ipv4 local link, apipa, dnssd or zeroconf if you do reboot one of them. Does the rebooted device get the same ip as before ...
0
votes
1answer
108 views

Accessing Apache sites on Macintosh (Snow Leopard) using internal IP address of machine

I am trying to access web sites on my Mac. If I use http://10.0.1.3/index.html then I get a web page with the following error on it: Forbidden You don't have permission to access /index.html on ...
0
votes
1answer
468 views

can not access dlink 604 set up interface

I used dlink-di604 enthernet board as router to share web access. My ISP provides the service base on Ethernet rathern than base on Ethernet pppoe mode. It is manually setup ipv4, subnet mask , DNS,...
0
votes
1answer
41 views

Why is my IPv6 Address showing instead of my IPv4?

I am wanting to host a server, and I would like people to join through my IPv4 Address, but when I use ipconfig in the Command Prompt, I only get my IPv4 Address, and when I google "What is my IP" I ...
0
votes
0answers
54 views

10.0.0.1 is non-routable IP v4 address but it is routable over the Internet

Strange but this is happening to me I have checked on multiple machines but on the same network. IP v4 address - 10.0.0.1 is routable! see attached screenshot and suggest why this is happening. since ...
0
votes
0answers
27 views

VPN Connection: Draytek Vigor 2820 Cannot Initiate IPSEC Tunnel

I have been asked to setup a site-to-site IPSEC VPN Tunnel from a Vigor 2820 (at the client's premises) to a Cisco ASA 5505 (hosted at Rackspace). I have input all of the details that Rackspace had ...
0
votes
0answers
53 views

no internet connection windows server 2012 setting up remote desktop connection

I'd like to setup my Windows 2012 Server so I can Remote Desktop Connection from my client (Windows 10) with the static IP that I'm going to give to the server. (So not through a site). After having ...
0
votes
0answers
65 views

Ping: General Failure

I am facing a weird issue on my laptop that only Internet Explorer can access internet no other application, not even chrome, iTunes. When I try to ping any website I get an error. When I ...
0
votes
0answers
43 views

TTL in ping reply set to 128

I'm using the ping command to ping google.com, and can't understand why am I getting TTL of 128 in the response. ping www.google.com PING www.google.com (172.217.19.196) 56(84) bytes of data. 64 ...
0
votes
2answers
182 views

Unable to connect to one particular FTP server

I am unable to connect to a particular FTP server at Fasthosts over my usual ISP connection, using any of Filezilla, Notepad++ or WinSCP FTP clients on either my PC or my laptop. However, I CAN ...
0
votes
0answers
26 views

PPTP VPN issue, multiple platforms

Using PPTP VPN for multiple clients, I've seen an interesting issue on Mac OSX El Capitan, and Windows 7 and 8. For clients connecting from home using a subnet that is identical to the internal subnet ...
0
votes
0answers
11 views

GNU/Linux ping: Disable timestamps

I'm using ping utility, iputils-sss20101006. The -s 100 option causes the ICMPv4 packet to have an 8-byte timestamp and 92 bytes of random data. Therefore all Echo and Echo Reply packets include an 8-...
0
votes
0answers
81 views

IPv4 or IPv6 for local DNS server?

I am a bit inexperiencied with networks. I have set up and dns server in a virtual machine on Debian 8 using dnsmasq. To test if it was working, I gave it only one record: www.facebook.com with ...
0
votes
2answers
711 views

long delay during ssh login

When I connect to my Debian server via ssh, the ssh client tries to establish a IPv6 connection. This fails after a long timeout (~30sec), then falls back to IPv4, which then succeeds, and I'm ...
0
votes
1answer
540 views

Any way to create OpenSSL certificate request that would be valid for two IP addresses?

I have a private app running as a webserver on a machine on an isolated wifi router using 192.168.1.*/255.255.255.0, with no DNS capability & no upstream Internet; basically, only local wireless. ...
0
votes
1answer
554 views

PC sends repeated ARP requests to Default Gateway

CONTEXT: My machine, for whatever reason, is flooding the network with ARP requests. A downstream switch sees this as malicious and cuts my connection. I've narrowed it down to one of the dozen or ...
0
votes
0answers
398 views

Assign static IPv4 to specific MAC address

I am trying to assign same IPv4 to few devices every time they connect to wi-fi AP. I use Zyxel NWA3560-N. I think that there should be option to set static IP on every device and block assigning ...
0
votes
1answer
253 views

Access IPv6 home server remotely (also from IPv4 networks)

I have an ISP that uses IPv6 and I want to set up a home server running windows server 2012 essentials and access it remotely using the remote web access feature. is this feature capable of IPv6? and ...
0
votes
1answer
643 views

Access IPv6 server via IPv4 tunnel?

I am an installer for an ISP here in Alberta Canada. They recently launched LTE but are doing double NAT on IPv4 so accessing a server from the outside world isn't possible via IPv4. They do however ...
0
votes
0answers
506 views

Just upgraded to HughesNet Gen4. Have IPv6 access but not IPv4 access on my wired network.

We just upgraded to HughesNet Gen 4. Now our wired network only works partially. We can access wireless (which runs through our wired switch). The Wired network says IPv4: No Internet Access. IPv6: ...
0
votes
0answers
176 views

windows 7 prefer ipv4 over ipv6

I have ATT Uverse for my internet. A few months ago we had problems and they installed a new router. All of a sudden google and facebook are using ipv6 and are getting horrible performance, they ...
0
votes
0answers
147 views

directed subnet broadcasts with openwrt

I've got a wireless router with openwrt 14.07 that acts as a router (not a bridge) between the local ethernet subnet (eg. 192.168.1.0/24) and a wireless network (eg. 192.168.2.0/24). I would like to ...
0
votes
1answer
109 views

Ipv4 properties tab greyed out

I am facing this problem of IPv4 and IPv6 properties tabs greyed out and not able to change the settings of the same. I have tried many solutions given online such as netsh commands and antivirus and ...
0
votes
0answers
177 views

Nslookup works but ping fails

I've recently ran into this weird problem where the domain names fail to resolve from DNS. When I try to ping google.com, I get ping request could not find host google.com, but nslookup returns the ...
0
votes
0answers
286 views

Disabling IPv6 DNS resolution on client only to a specific domain

I have a Windows 8.1 machine, from which I want to connect to my company's extranet. However, I can't connect to it from my domain-joined laptop when it's at home, though I can from a work, or a non-...
0
votes
0answers
260 views

Make socat listen on both IPv4 and IPv6 stacks

Switched providers the other day, they only assign DSlite-connections. I'm fine, I thought. Thing is - I want to access some of my stuff from outside of my network, which should be of much less a ...
0
votes
1answer
66 views

Using DNS to forward to a specific local address and port?

Im running a server on a local address, a raspberry pi at x.x.x.111:64738. I own a domain, mydomain.nu. I want to create a subdomain (the hosting provides a cPanel interface) and forward it to my ...
0
votes
3answers
276 views

No internet when cable is connected directly to pc

I have a router with static settings in it, my computer is connected to that router, I want to remove that router and connect my PC directly to the internet, I went to the ipv4 settings in network and ...
0
votes
0answers
303 views

Default Gateway address for multiple VPN users/clients

We need some help with a VPN setup for a school project. What we want to do: We would like to have approx. 10 different VPN uses that can connect to our Windows Server 2012 R2 which is setup as a ...
0
votes
1answer
344 views

Windows 7 Home Premium cannot connect to internet via wireless or ethernet connections

I have an HP laptop and I cannot connect to the internet even though it says "Internet Access". When I try I get "Cannot access page", then the browser closes and searches for a solution that results ...
0
votes
1answer
45 views

Disable autoconfiguration of new network interface on Linux desktop

I am running Ubuntu Linux (desktop) and whenever I insert an external network card to my computer, it automatically creates a new interface (that is okay) but also instantly giving the interface an IP ...
0
votes
0answers
2k views

CentOS 7 can't get IPv4 address from DHCP server

I have classroom full of computer running CentOS 7 and only one computer can't get IPv4 address from DHCP server during boot, because NIC is not yet up, when dhcp client tries to get IPv4 address from ...
0
votes
0answers
58 views

windows 7 has ipv6 connectivity but not v4

My wife's windows 7 laptop had network connection problem out of the blue yesterday. It can access google sites like youtube, but nothing else. When I troubleshoot, I found that it has IPV6 ...
0
votes
1answer
2k views

Cant ping to computer but reverse ping can

So Computer 1 can ping to computer 2 but reverse it can't Setup : router A (192.168.0.xxx) 255.255.255.0 > Router B (192.168.1.xxx) 255.255.255.0 So computer1 on Router B can ping to computer2 on ...
0
votes
0answers
87 views

Dilemma about how my wireless devices obtain IP address

Currently in my network there are 7 wireless outdoor equipment and 1 switch . This switch act as backbone switch for my network as internet supply from ISP is connected to this switch. Through this ...
0
votes
0answers
3k views

Default Gateway IPv6 but IP set on IPv4

I have a client who has a network setup. I have a couple of devices which work on the network using socket communication which I want integrated onto their network. There is a PC which is to be made ...
0
votes
0answers
33 views

Win8.1 machines have trouble browsing each other occasionally

I've got two Win8.1 machines. One is a desktop connected to the (dd-wrt) router through an ethernet cable, the other is a laptop that connects over wifi. Both can ping each other just fine through ...