1
vote
0answers
24 views

How do I deploy IPv6 within a LAN using a Debian based router?

My ISP started using DHCPv6, which means with this /etc/network/interfaces... auto lo eth0 eth1 iface lo inet loopback allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask ...
0
votes
1answer
17 views

How to deal with Dual-Stack Lite and incoming connections

My ISP (german cable ISP Unitymedia) forced me to use DS-Lite / Dual Stack Lite because he ran out of IPv4 addresses. Common problems with that setup are: interrupted connections (i.e. in online ...
2
votes
1answer
25 views

IpV6 No network access

I'm Currently using Windows 8 on my laptop, and windows 7 on my computer. They used to be connected by the homegroup, which was brilliant, but now they can't find eachother anymore. I've tried to ...
0
votes
0answers
12 views

Quell ICMPv6 responses using Linux

On Linux, you can use: sysctl -w net.ipv4.icmp_echo_ignore_all = 1 to quell ICMP echo responses from the Linux networking stack. This is different from BLOCKING ICMP responses using ...
0
votes
0answers
52 views

Attemp to access WAMP server from other devices on network gives 403 forbidden

I set up a WAMP server on my main PC. I have files in the www directory, and can see the results via localhost. The problem is, I am not able to access the server via the server IP from even the ...
0
votes
2answers
58 views

Configuring and troubleshooting IPv6 routing on multi-interface Cisco router [closed]

I recently purchased a new Cisco router for my IPv6 network. I configured the correct IPv6 addresses on all the interfaces and enabled the interfaces on the network. I'm able to ping all of the ...
1
vote
1answer
46 views

What is the difference between IPv4 and IPv6 in terms of binary?

I know this question is for entry level users. That I am. New to this world and finding it very interesting. I have done some research on IPv4 and how to convert IP addresses to binary and vice versa. ...
0
votes
1answer
65 views

Unable to transmit stream through OpenVPN tunnel

We are trying to transmit a video-stream via netcat from a OpenVPN server to a client. The server is a Raspberry Pi with Pidora running on it. The client is a Notebook with Ubuntu 12.04 and has a ...
3
votes
1answer
171 views

How to use ipv6 with Vagrant and VirtualBox?

I have a Vagrant setup running Ubuntu in VirtualBox. I'm trying to create a public virtual network interface that I can access from the host. I have had no problem doing this with ipv4. Using ipv6 I ...
1
vote
1answer
30 views

How to transparently tunnel a port from IPv4 to a remote IPv6 device?

At home, I am connected with an IPv6 address and additionally, my provider provides a NAT-like setup through which I receive a public IPv4 address that I share with other customers (the reason being ...
0
votes
1answer
133 views

Why does Win7 SP7 64-bit try to resolve DNS agsint IPv6 DNS Servers?

Pretty vanilla, just installed Win 7, SP1, 64-bit. NO IPv6 ACCESS. The network status says IPv4: Internet. IPv6: No network access. Pick a domain that has DNS servers that have both IPv4 and IPv6 ...
1
vote
1answer
195 views

No IPv6 with Asus RT-N56U

Consider the following: My ISP have native IPv6. When I plug directly into ethernet port on my motherboard I have IPv6 connectivity, everything is configured automatically, and works fine. But when ...
0
votes
0answers
49 views

Get IPv6 to work

I'm trying to get IPv6 to work. My host provied me the following informations: IPv6 network: 2a03:4000:2:483::/64 IPv6 gateway: fe80::1 My /etc/network/interfaces looks like this: # The loopback ...
0
votes
0answers
31 views

Networking from a tun6to4 to pppX interfaces on debian

So my /etc/network/interfaces looks like auto eth0 iface eth0 inet static address 198.51.100.50 netmask 255.255.255.0 gateway 198.51.100.1 # VPN Subnet auto eth0:1 iface eth0:1 inet static ...
0
votes
0answers
108 views

Wireless, IPv6: no network, unidentified netword at random

I have been reading other threads and trying suggested steps but nothing seems to work for me. 50% of time the internet works fine, sometimes it slows down sometimes there is no connection at all. The ...
0
votes
2answers
101 views

How can I filter the output from a multicast ping6 to all nodes to get all reachable IPv6 Devices in one moment in time?

How can I filter the Output from a multicast ping to all nodes so that in the output file every IP appears only once? If a new device joins the network its written to a file with a joining ...
2
votes
1answer
95 views

Determine Default Gateway with Wired IPv6 address on Mac OSX

I am trying to create a dual network connection via Wireless and ethernet. The wifi connection runs my internet and the ethernet connection is connected to router which is connected to a NAS. I've had ...
3
votes
1answer
176 views

Why does my Windows have hundreds of temporary IPv6 addresses?

My ISP enabled IPv6 for me a few weeks ago. Now I noticted that Windows (8.1) gets a lot of temporary IPv6 addresses. ipconfig has the following output (real addresses are obfuscated): Windows IP ...
1
vote
1answer
100 views

Internet Connection frequently dropping on Ethernet

My internet connection is frequently dropping on Wired Lan (Ethernet) but the wireless works fine without any problem. It's not an issue of Internet Speed as Internet works fine in Windows. ifconfig ...
1
vote
0answers
58 views

Windows 7 / PuTTY drop IPv6 TCP connections on brief outages

This is an IPv6-version of the following question: Why Windows 7 / PuTTY drop TCP connections even on very brief outages? After moving from IPv4 to IPv6, I've noticed that my IPv6 connections would ...
1
vote
0answers
42 views

Login to Hamachi using IPv6 times out

My cable modem uses IPv6 and so does my LAN. I want to connect my laptop to the hamachi service. However, the laptop tries to connect via IPv4 and this attempt fails. The network configuration of my ...
0
votes
0answers
460 views

No DNS requests in Windows 7, nslookup works, ping and tracert can't resolve

I was trying to bring my old desktop computer back from the dead and faced a problem I couldn't deal with. The main issue is what I've written in the title - nslookup works, ping and tracert give a ...
1
vote
1answer
48 views

Use sixxs subnet on one machine

I've got a sixxs subnet with aiccu on my debian vps, and want to use the complete subnet at my vps. Currently only the 2001:4dd0:f000:000f::2 is usable. My config: (ip a) 3: sit0: <NOARP> mtu ...
-1
votes
1answer
58 views

TOR and Unencrypted HTTP Traffic [closed]

If the NSA has pinpointed certain people using TOR, is there a way to encrypt unencrypted web traffic? I suppose this is kind of a dumb question that answers itself, as once it leaves the exit node, ...
0
votes
2answers
57 views

VDSL2 Modem in bridged mode using IPV6 in LAN

I have a VDSL2 IPv6 modem, it is bridged by default so usually sharing files between computers in LAN has happened with the same speed as my connection, which is 100/30 mbits. So basically all the ...
1
vote
1answer
60 views

Dynamic DNS with Dual-Stack IPv4/IPv6

In the past, I have been providing services (i.e. HTTP, VPN, etc.) on my network via port forwarding. Each service has its own domain name (i.e. home.domain.name, deluge.domain.name, vpn.domain.name, ...
3
votes
1answer
856 views

Disable IPv6 on Interface in Debian Wheezy?

I'm working on Debian Wheezy: $ uname -a Linux openstack1 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux I set up two networks for VirtualBox: # Public network vboxnet0 (10.1.0.0/16) ...
1
vote
1answer
62 views

VPN from IPv4 only to IPv6 only

I want to access my home network on the go, but it can only be reached via IPv6 from outside. The network(s) I want to reach it from usually only have IPv4. (How) Can I access the whole home network ...
0
votes
1answer
76 views

Resetting gone wrong

I have reset my linksys router, and now my internet is horribly slow. please check details from command prompt below and tell me what's wrong. Thanks. Microsoft Windows [Version 6.1.7601] ...
2
votes
1answer
142 views

NAT with IPv6 (Forced by ISP)

My ISP has recently decided that "high bandwidth clients" are now forced to use IPv6. While I can plug my laptop with Win7 directly into the modem and I have access, connecting routers or my ...
0
votes
1answer
97 views

How do I bind to a specific link local IPv6 address other than the default?

I'm not 100% sure I'm using the correct terminology in the title, so if someone knows better than I do please amend it. I'm trying to replicate a malicious script that I've seen in the wild for the ...
0
votes
1answer
56 views

Addressing computers via ipv6 on local network [duplicate]

I'm very confused about how to address a computer on my local network via ipv6. I am writing a server which is meant to support both ipv4 and ipv6. Now I have don an ifconfig and gotten my ipv4 local ...
0
votes
0answers
215 views

Can't access IPv6 on OS X 10.9 with IPv6 Pass-Throughout Router

Basic Information Router: Netgear R6300v2, connected to wired network(IPv6 supported) Client 1: MacBook Air 2013-mid(OS X 10.9), connected to router wirelessly Client 2: Synology NAS(DSM 4.3, linux ...
0
votes
0answers
23 views

SIT tunnel link errors

I've got a SIT tunnel set up on Linux since my ISP uses 6RD to provide IPv6 connectivity. When I check the tunnel interface with ifconfig, it says the following: 6rd Link encap:IPv6-in-IPv4 ...
2
votes
0answers
875 views

How to make FTP Server in Mavericks listen on IPv6 interfaces?

Althought native IPv6 connectivity is not yet possible with my ISP, I can access IPv6 websites via 6to4 tunnel. The Server App in Mac OS X Mavericks comes with FTP features. However it seems to accept ...
0
votes
1answer
108 views

I have IP conflicts and I can't host my server anymore [duplicate]

My father and I have the same IP address on my network. (I found this on cmyip.com) This makes it impossible for me to host servers (for instance minecraft or terraria) and I don't know the solution. ...
1
vote
2answers
2k views

Dynamic DNS at freedns.afraid.org using a Fritz!Box

I am having some trouble setting up Dynamic DNS with my Fritz!Box 7360. I have set up the Dynamic DNS page with (this is translated from German, so might be worded a bit differently): [x] Use ...
0
votes
0answers
50 views

My mac doesn't get an ipv6 address from my school's DHCP server automatically

My college does offer ipv6 service, and my mac has no trouble to use it before yesterday. While now I am unable to get an ipv6 address from the server, my roommates's computers work just fine. I have ...
2
votes
1answer
398 views

disable IPv6 autoconf (MAC-based) IPv6 address without disabling privacy addresses?

Is it possible to configure the Linux kernel to automatically get the RFC4941 temporary (privacy) IPv6 addresses without getting the RFC4862 public (MAC-based) IPv6 address? With the following sysctl ...
0
votes
1answer
239 views

I get an IPv6 address from my ISP but can't use any IPv6 services

When I enable DHCPv6 with Prefix Delegation on my router, it gets an IPv6 address from my ISP (TWC) in this block, and my PC will get one automatically as well. When I try an IPv6 test site it fails ...
5
votes
1answer
182 views

Use IPv6 temporary address only with remote peers

I think this question concerns the interaction between the configurable Default Address Selection algorithm defined by RFC-3484 and the temporary addresses defined by RFC-4941, though the solution may ...
0
votes
1answer
634 views

How do I install the Microsoft 6to4 Adapter?

I'm unable to see the 6to4/Teredo adapter anywhere in my Windows 7 installation. In my Device Manager, the only network adapters are my wireless Realtek card, and "TAP-Win32 Adapter OAS" which is for ...
0
votes
1answer
178 views

Some sites extremely slow! How to determine if its IPv6? and disable it?

My internet is extremely slow on some sites, the famous ones. Google, Facebook, etc. But then, the very next minute, they are superfast. I got to know from somewhere that this is due to clogging and ...
1
vote
1answer
81 views

In tspc ipv6 tunnelling, does tunnel broker required for ipv4 to ipv4 communication?

I am new in embedded systems and trying to add support the ipv6 network availability in my new product but I have understood that, First of all, My system is connected to IPv4 ISP and I want to ...
1
vote
1answer
993 views

Cannot get an IPv6 address on Debian

I am using Debian 7 with the newest updates. I have a block of IPv6 adresses from my provider and, according to the provider the DHCP server is setup so that I should get an ip automatically (I even ...
0
votes
1answer
73 views

what does this ping listing mean — it does not have an IP address but some hex numbers

Something's screwy on our network at work, and I'm no longer able to reach a server where I'm developing a database application. I'm not the network admin, and he's out sick. When, from my ...
1
vote
1answer
161 views

Ping magically works on Windows 8

There's a remote machine named JUPITER, accessible through Win8 DirectAccess. Then just after IPCONFIG /FLUSHDNS, I observe the following: ping JUPITER works and pings to an IPV6 address. nslookup ...
1
vote
1answer
213 views

what's IPv6 analogue for IPv4 `arp -an` and “arp who-has”?

In IPv4 world, when you want to talk to another computer, you ask which MAC address claims a given IPv4 address, the arp who-has ... tell ... exchange as per tcpdump, and a cache of such mappings from ...
1
vote
1answer
333 views

Not able IPv6-tunnel using miredo for Mac OS X

I have been trying to setup Miredo on OS X 10.7.5 using the Miredo Installer for OS X When Miredo starts after installation, the check box next to the "Teredo Tunnel" is still red and I am not able ...
-1
votes
1answer
129 views

How to use remote IPv6 over ssh? [closed]

I have a cheap VPS with 1 IPv4 and 5 IPv6. I want to use 1 of the unused IPv6 connections on my computer so I can start using IPv6 Does anyone have any ideas? I would prefer an all OpenSSH based ...