0
votes
0answers
23 views

I can only connect to IPv6 websites

my problem is, that I can only connect to servers and their websites supporting IPv6 (such as google.com or facebook.com). On other sites, a ping request times out. Additional information: 1. My ...
0
votes
1answer
150 views

Understanding my router IPv6

I got my new Internet contract today. This is the first time I use this router and deal with IPv6. I want to host a local website on a home server. I went to the configuration page of the router and I ...
-2
votes
2answers
52 views

My router has only IPv6 and I need to host websites

I have never dealt with IPv6. Today I got my internet installed from an internet company and they brought the router. When I accessed the router to see its public ip address, I found that there is ...
-3
votes
2answers
38 views

Switching to IPv6 - Do I need a router?

In the future, since every IP (IPv6 adress) is going to be global, we don't need to use NAT. So basically, why do I need a router on an IPv6-only global network? Why not just replace my router with a ...
6
votes
1answer
400 views

Why would my router have different MAC addresses for IP and IPv6 transactions?

Today I was using tcpdump and I noticed my computer was having IPv6 traffic with a particular MAC address that I could not match with an IP using nmap or arping. After looking at the tcpdump logs a ...
1
vote
1answer
198 views

How do I deploy IPv6 within a LAN using a Debian based router and prefix delegation?

My ISP started using DHCPv6, which means with this /etc/network/interfaces... auto lo eth0 eth1 iface lo inet loopback allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask ...
1
vote
1answer
41 views

How can my program make IPv6 connections?

I see in Resource Monitor that my torrent client uTorrent makes many connections to addresses in IPv6 range. How can it be? My router is D-Link DIR-615 and has no any setting about IPv6. How can any ...
0
votes
0answers
266 views

Attemp to access WAMP server from other devices on network gives 403 forbidden

I set up a WAMP server on my main PC. I have files in the www directory, and can see the results via localhost. The problem is, I am not able to access the server via the server IP from even the ...
0
votes
2answers
72 views

How to “extend” IPv6 stateless autoconfiguration domain to my other network without bridging?

My router's uplink is network that uses has a /64 IPv6 space and uses stateless autoconfiguration. I want the same stateless autoconfiguration to be available on the second router's interface. The ...
1
vote
1answer
811 views

No IPv6 with Asus RT-N56U

Consider the following: My ISP have native IPv6. When I plug directly into ethernet port on my motherboard I have IPv6 connectivity, everything is configured automatically, and works fine. But when ...
0
votes
3answers
81 views

VDSL2 Modem in bridged mode using IPV6 in LAN

I have a VDSL2 IPv6 modem, it is bridged by default so usually sharing files between computers in LAN has happened with the same speed as my connection, which is 100/30 mbits. So basically all the ...
2
votes
1answer
237 views

NAT with IPv6 (Forced by ISP)

My ISP has recently decided that "high bandwidth clients" are now forced to use IPv6. While I can plug my laptop with Win7 directly into the modem and I have access, connecting routers or my ...
0
votes
0answers
233 views

Can't access IPv6 on OS X 10.9 with IPv6 Pass-Throughout Router

Basic Information Router: Netgear R6300v2, connected to wired network(IPv6 supported) Client 1: MacBook Air 2013-mid(OS X 10.9), connected to router wirelessly Client 2: Synology NAS(DSM 4.3, linux ...
0
votes
1answer
321 views

Why is UDP traceroute not working for IPv6?

I have just gotten dual stack support on my CMTS and enabled IPv6 on my router. I have debian installed on my PC, and I am noticing the default traceroute (uses UDP on linux) is only making it to my ...
0
votes
1answer
123 views

IPv6-connected FreeBSD server is not available via LAN

My Setup I have a FreeBSD server with the following output of uname -a: FreeBSD glacier 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 ...
1
vote
2answers
349 views

Cisco - client can ping but router not

I configured a HE.net IPv6 Tunnel on my router which has two WAN ports. The strange thing is that all clients are able to ping IPv6 hosts on Internet, but my router cannot ping anyone. Here's the ...
3
votes
2answers
1k views

Why is Windows 7 announcing itself as an IPv6 router?

I have a 6in4 ipv6 connection from a linux box to a broker. I use gogoc to establish the connection to the broker, and radvd to advertise the route to clients on the network. All this appears to ...
1
vote
4answers
205 views

Are there any home ISPs that offer external IPs for all devices on the network? (No NAT)

NAT is a a real pain, and the large address space in IPv6 doesn't need it. Are there any ISPs that offer actual home routing, giving each computer a global IP address, rather than a local one? This ...
2
votes
2answers
349 views

Privacy, VPN and routers

Ever since this ACTA push-up the things are starting to heat up around torrents and privacy. I am using Tribler now, but this is not secure enough for me. Not enough privacy. I've been using in the ...
4
votes
3answers
2k views

How do I know if a router can handle multiple static IPs?

How do I know if a router can handle multiple static IPs? Is there a protocol or something I should look out for? Also - how important is it that my router can support IPv6?
3
votes
2answers
2k views

Should I get a router with ipv6 support?

I'm in the process of getting a new gigabit router so I can transfer files faster to and from my Lacie Network Space. I found Asus RT-N56U Wireless N Dual Band Gigabit Router. Its performance is ...
2
votes
2answers
1k views

Dual Stack Routers for home use? [closed]

I'm in the market for a new network appliance router that either has the following features, or can be modded to have the following features: Dual Stack (ipv4, ipv6) On-Board Configurable DNS Server ...
10
votes
2answers
6k views

How do I know if my router supports IPv6?

$ ping6 :: PING ::(::) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.046 ms 64 bytes from ::1: icmp_seq=2 ttl=64 time=0.053 ms 64 bytes from ::1: icmp_seq=3 ttl=64 time=0.058 ms ^C --- :: ...
0
votes
2answers
573 views

Ipv6 routers for home and smb

Keep reading stories about how ipv4 is just about out of addresses and how we need to start moving to ipv6 What kind of hardware is out there and what features desirable for SMB and or home use?
1
vote
3answers
2k views

Can I use IPv6 in Windows 7 if my ISP support it but not my router?

I would like to use IPv6 on my desktop computer, it has Windows 7. My ISP has support for IPv6, since if I connects directly to the adsl-modem IPv6 works fine. But my home router doesn't support IPv6 ...
0
votes
3answers
778 views

IPv4 to IPv6 wireless LAN router

Does anyone know where I can find a home wireless router that does IPv4 to IPv6 address translation?
5
votes
4answers
3k views

Is it possible to use IPv6 in LAN with router only supporting IPv4?

My router (Belkin N1 Vision) seem to only support IPv4. The problem is that i'm trying to get Windows 7 Homegroup going and it requires IPv6. I'm trying to connect home computer which is connected to ...
17
votes
3answers
9k views

Which home router support IPv6?

Which routers suitable for small/home networks support IPv6 as described in the Microsoft document IPv6 Support in Home Routers? Edit: to answer some comments wondering about the reasons of wanting ...
8
votes
4answers
11k views

Are there any wireless IPv6-ready home routers? [closed]

Checked the router we have at home (D-Link DIR-655) and doesn't seem like it supports IPv6. Got curious; Are there any? It would have to support bridging to IPv4 on the outside though, since the ISP ...