IPv6 is the newest version of the Internet Protocol. It is designed to supersede IPv4 as it offers many more addresses.

learn more… | top users | synonyms

0
votes
2answers
605 views

IPv6 connection through IPv4 network without internet-connection

I'm working at a project at my university and now the following problem shows up: We got a Server [Server] with a private IPv6 network. Some sensors (temperature, humidity...) are connected through a ...
0
votes
1answer
89 views

Addressing computers via ipv6 on local network [duplicate]

I'm very confused about how to address a computer on my local network via ipv6. I am writing a server which is meant to support both ipv4 and ipv6. Now I have don an ifconfig and gotten my ipv4 local ...
2
votes
1answer
375 views

Can't get an IPV6 ip address with any 802.11g adaptor

I've recently been going dual stack with IPV4 and IPV6 where possible since my isp supports ipv6rd, as does my router - an Asus RT-N56U on firmware 3.0.0.4.374_979 (which is the latest at the time I ...
0
votes
1answer
426 views

Enable ipv6 in XP Mode on Windows 7 host?

Upgraded router to ipv6 capable router, ipv6 tunnel and enabled all home network to ipv6. Everything works perfectly except ipv6 in XP Mode. XP Mode is using Win7 host's wifi adapter directly. After ...
0
votes
0answers
275 views

Disable ipv6 in Opera? (windows)

How can i disable ipv6 in Opera? Windows version. Disabling ipv6 in Windows or using other browser are not acceptable options.
1
vote
1answer
311 views

Mac listening on port 80 for both IPv4 127.0.0.1 and IPv6 ::1 with SSH tunnel, but connection is not possible with IPv4?

I am connecting with openssh to a remote server, running a web server which I need to access as if from the server itself. Therefore I use ssh-tunneling, like this: sudo ssh -L 80:127.0.0.1:7065 ...
0
votes
0answers
137 views

Slow SCP tranfers over IPv6 VPN IPSec which has IPv4 private subnets

I have 2 hosts connected with IPv6 VPN. I am using IPv4 internal addresses for machines connected internally and use subnets addressed for these in ipv4. When a host wants to scp a 1 Gig file pull ...
0
votes
1answer
207 views

Setup IPv6 over IPv4 tunnel in VPN

Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B ...
2
votes
0answers
900 views

How to make FTP Server in Mavericks listen on IPv6 interfaces?

Althought native IPv6 connectivity is not yet possible with my ISP, I can access IPv6 websites via 6to4 tunnel. The Server App in Mac OS X Mavericks comes with FTP features. However it seems to accept ...
0
votes
1answer
190 views

I have IP conflicts and I can't host my server anymore [duplicate]

My father and I have the same IP address on my network. (I found this on cmyip.com) This makes it impossible for me to host servers (for instance minecraft or terraria) and I don't know the solution. ...
1
vote
1answer
486 views

radvd won't accept non-/64 subnets

I'm trying to set up radvd on a 6RD configuration (on Linux), where I have a /64 subnet, and I'm trying to use it on two distinct physical networks, so I'm trying to give each of them a /80 subnet. ...
2
votes
3answers
5k views

Dynamic DNS at freedns.afraid.org using a Fritz!Box

I am having some trouble setting up Dynamic DNS with my Fritz!Box 7360. I have set up the Dynamic DNS page with (this is translated from German, so might be worded a bit differently): [x] Use ...
1
vote
1answer
716 views

OpenVPN 4in6 or 4over6 tunnel

My ISP sucks. It gives me an IPv6 Address and an IPv4 one, but IPv4 is down 50% of the time (I can't access any IPv4 Services every 10 minutes)... As I already have an OpenVPN Server set up, I asked ...
0
votes
1answer
98 views

Unknown IP address is kept loggin into my email account

My Google account showed me that this IP address (2601:2:1080:6bf:596c:862:733b:9ccb) has logged into my email account multiple times. Is there anyway to track this IP address? This is not what a ...
2
votes
1answer
105 views

Getting Correct IPv6 Address from given prefix

On my windows xp machine, i have this information: IP Address: fcb1:cafe:1:9e33::2 Default Gateway: fcb1:cafe:1:9e33::1 It works fine, and i can ping the gateway. However now there is another ...
0
votes
2answers
99 views

How do I tell if my Macbook supports IPv6?

I want to know whether my Macbook can handle IPv6. How do I find that out?
0
votes
1answer
486 views

How to set up a IPv6 to IPv4 gateway for VPS [closed]

Condition IPv6 and IPv4 enabled VPS IPv6 and IPv4 enabled Client(Could be PC or Mac) Problem Client get restricted IPv4 connection whereas IPv6 connection is unlimited. Solution Client connects ...
0
votes
0answers
36 views

Set an ipv6-specific MTU

I have a router which has ipv6 connectivity through a tunneling mechanism. The router announces a prefix in the LAN, and clients get native ipv6 connectivity on their point of view. The MTU of the LAN ...
-1
votes
1answer
228 views

Curl with ipv6 not working by default

I am trying to curl ipv6 adresses, but without success. If i try lets say: curl https://google.com I wait for a timeout and get network unreachable If i force ipv4, everything is fine. ...
2
votes
1answer
523 views

disable IPv6 autoconf (MAC-based) IPv6 address without disabling privacy addresses?

Is it possible to configure the Linux kernel to automatically get the RFC4941 temporary (privacy) IPv6 addresses without getting the RFC4862 public (MAC-based) IPv6 address? With the following sysctl ...
0
votes
1answer
401 views

I get an IPv6 address from my ISP but can't use any IPv6 services

When I enable DHCPv6 with Prefix Delegation on my router, it gets an IPv6 address from my ISP (TWC) in this block, and my PC will get one automatically as well. When I try an IPv6 test site it fails ...
5
votes
1answer
310 views

Use IPv6 temporary address only with remote peers

I think this question concerns the interaction between the configurable Default Address Selection algorithm defined by RFC-3484 and the temporary addresses defined by RFC-4941, though the solution may ...
2
votes
0answers
594 views

Window Server 2012 throttling incoming IPv6 network file sharing operations

Short version IPv4 download from server: fast IPv4 upload to server: fast IPv6 download from server: fast IPv6 upload to server: slow Full version I am copying files from a GBe desktop to a GBe ...
0
votes
1answer
2k views

How do I install the Microsoft 6to4 Adapter?

I'm unable to see the 6to4/Teredo adapter anywhere in my Windows 7 installation. In my Device Manager, the only network adapters are my wireless Realtek card, and "TAP-Win32 Adapter OAS" which is for ...
1
vote
1answer
544 views

Some sites extremely slow! How to determine if its IPv6? and disable it?

My internet is extremely slow on some sites, the famous ones. Google, Facebook, etc. But then, the very next minute, they are superfast. I got to know from somewhere that this is due to clogging and ...
1
vote
1answer
79 views

Is there any way to serve http from behind a typical home NAT/router (from inside a LAN)

I seem to remember reading that something in IPv6 could help with this. I thought I would ask here to see if per-to-peer http could be a possibility these days. I am familiar with hole-punching, but I ...
1
vote
1answer
180 views

What prevents my ISP from assigning me a dynamic IPv4 address and static IPv6 address(es)? [closed]

Till now I never heard of an Internet Service Provider anywhere on the world, that assigns static IPv6 addresses besides the one dynamic IPv4 address, to private customers. Is there a technical ...
1
vote
1answer
111 views

In tspc ipv6 tunnelling, does tunnel broker required for ipv4 to ipv4 communication?

I am new in embedded systems and trying to add support the ipv6 network availability in my new product but I have understood that, First of all, My system is connected to IPv4 ISP and I want to ...
1
vote
1answer
2k views

Cannot get an IPv6 address on Debian

I am using Debian 7 with the newest updates. I have a block of IPv6 adresses from my provider and, according to the provider the DHCP server is setup so that I should get an ip automatically (I even ...
0
votes
0answers
173 views

::1 vs 127.0.0.1 for iis local sites

I have a local site which is running at admin.mysite.com. I have set up the iis config to point to the correct folder. When i enter the following entry in my hosts folder 127.0.0.1 admin.mysite.com ...
0
votes
1answer
82 views

what does this ping listing mean — it does not have an IP address but some hex numbers

Something's screwy on our network at work, and I'm no longer able to reach a server where I'm developing a database application. I'm not the network admin, and he's out sick. When, from my ...
1
vote
1answer
301 views

Ping magically works on Windows 8

There's a remote machine named JUPITER, accessible through Win8 DirectAccess. Then just after IPCONFIG /FLUSHDNS, I observe the following: ping JUPITER works and pings to an IPV6 address. nslookup ...
2
votes
2answers
77 views

Ask for IPv6 address through IPv4

I am working on a project for discovering IPv6 host over the internet and I have a question. Is there any way that I can send a request to an IPv4 address and return me back their IPv6 address (if it ...
1
vote
1answer
508 views

what's IPv6 analogue for IPv4 `arp -an` and “arp who-has”?

In IPv4 world, when you want to talk to another computer, you ask which MAC address claims a given IPv4 address, the arp who-has ... tell ... exchange as per tcpdump, and a cache of such mappings from ...
0
votes
1answer
366 views

How to make a OpenVPN tunnel between home and server network with IPv6 support

I'm build a OpenVPN tunnel between my home network and my server. Here's my current scenario: Server (IPv4: 198.x.x.5) IPv6: 2001:xxx:xxx:xxx::abcd) <-----------> My ISP (CGN) ...
1
vote
1answer
547 views

Not able IPv6-tunnel using miredo for Mac OS X

I have been trying to setup Miredo on OS X 10.7.5 using the Miredo Installer for OS X When Miredo starts after installation, the check box next to the "Teredo Tunnel" is still red and I am not able ...
-1
votes
1answer
163 views

How to use remote IPv6 over ssh? [closed]

I have a cheap VPS with 1 IPv4 and 5 IPv6. I want to use 1 of the unused IPv6 connections on my computer so I can start using IPv6 Does anyone have any ideas? I would prefer an all OpenSSH based ...
1
vote
0answers
38 views

No Internet Access for Metro Apps [duplicate]

I have a Laptop running Windows8 that is connected to the Internet via LAN. Because I do not have a WiFi router at the moment, I am sharing Internet over a hostednetwork (ICS enabled for the LAN ...
4
votes
1answer
179 views

Get IPv6 address of an IPv4 machine?

Given two machines on a local network, both connected via IPv4 and IPv6, can machine A get the IPv6 of machine B if it has machine B's IPv4 address? I presume the ARP cache should be able to provide ...
2
votes
2answers
2k views

How to get both IPv4 and IPv6 dynamic address

Running dhclient gets me an IPv4 address. Running dhclient -6 gets me an IPv6 address. And the man page says you can't combine v4 and v6. So how to get both v4 and v6 addresses at the same time?
2
votes
0answers
145 views

Forward IPsec tunnel from IPv4 endpoint to IPv6 endpoint

I have a new ISP and only have a Dual Stack - lite connection now. That means I can't access my router via IPv4 anymore, since the external IPv4 address is private. I have native IPv6 connectivity. ...
0
votes
2answers
2k views

TCPDUMP: are these args consistent or meaningless together?

I'm using tcpdump on routing software, and trying to check whether the presence of ip/ip6 protocol with an ip6/ip host (i.e., the other IP family), or else specifying a mix of IPv4 and IPv6 IPs as ...
2
votes
2answers
2k views

Routing IPv6 traffic through Debian pptpd into Hurricane Electric's IPv6 tunnel

I have set up a tunnel using Hurricane Electric's services on a Debian machine. It seems to work alright; I can ping6 ipv6.google.com and open it in links. I've also set up a PPTP daemon on the ...
1
vote
1answer
305 views

Quality of service in IPV6 [closed]

IPv6 was developed to solve some of the problems of IPv4, such as QoS. We know in IPV4 based on TOS values, a packet would be placed in a prioritized outgoing queue,or take a route with appropriate ...
-2
votes
2answers
125 views

How to Get the size of IPv6 header? [closed]

I know there is IHL field in IPV4 which is Internet Header Length.Since an IPv4 header may contain a variable number of options, this field specifies the size of the header. But there is no IHL or ...
0
votes
1answer
191 views

netsvc (dnscache,wecsvc,tapisvc,nlasvc,cryptsvc) sending stream to address 808:808::3821:ae83:100:20

i have win 8 installed on my computer, using pppoe connection with ipv6 disabled. but when i check on "resmon" i saw there is netsvc sending stream to 808:808::3821:ae83:100:20 address. i try to ...
0
votes
1answer
406 views

Why is UDP traceroute not working for IPv6?

I have just gotten dual stack support on my CMTS and enabled IPv6 on my router. I have debian installed on my PC, and I am noticing the default traceroute (uses UDP on linux) is only making it to my ...
2
votes
1answer
3k views

wireshark: how to capture traffic between guest and host OS?

I'm trying to set up a lab to demonstrate ipv6 attack and detection mechanism on my Macbook. This is my set up with virtualbox: Host OS: OS X 10.8.2 IPv6 automatically, wireless connection Geust OS: ...
0
votes
1answer
157 views

IPv6-connected FreeBSD server is not available via LAN

My Setup I have a FreeBSD server with the following output of uname -a: FreeBSD glacier 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 ...
0
votes
1answer
544 views

How to set up Teredo tunnel and share it?

How do I enable Teredo tunneling to the default Microsoft server mentioned in the Wikipedia article (teredo.ipv6.microsoft.com)? Google did not find any documentation, reliable or otherwise, to do ...