IPv6 is the newest version of the Internet Protocol. It is designed to supersede IPv4 as it offers many more addresses.

learn more… | top users | synonyms

1
vote
1answer
138 views

VPN from IPv4 only to IPv6 only

I want to access my home network on the go, but it can only be reached via IPv6 from outside. The network(s) I want to reach it from usually only have IPv4. (How) Can I access the whole home network ...
1
vote
1answer
179 views

Why doesn't curl work using an IPv6 connection?

How come a: curl -v -6 http://badurl.com doesn't work but a: curl -v -6 --head http://badurl.com Perfectly works? MTU isn't the problem (?) since: root@server:~# ping6 -c 10 -s 2000 -M do ...
1
vote
1answer
321 views

Ping magically works on Windows 8

There's a remote machine named JUPITER, accessible through Win8 DirectAccess. Then just after IPCONFIG /FLUSHDNS, I observe the following: ping JUPITER works and pings to an IPV6 address. nslookup ...
1
vote
2answers
710 views

IPv6 tunnel from behind an ISP-level NAT

Previously, at a different location, I set up a Hurricane Electric IPv6 tunnel, which worked fine, allowed me to access IPv6 only sites and test the native IPv6 connections on my remote servers. ...
1
vote
1answer
1k views

How do I access IPV6 from IPV4?

I have been searching for a long time ipv4 to ipv6 proxy program but i nothing found... Currently i have IPv4 address however i would like to try IPv6 address. Is there a simple solution for IPV6 ...
1
vote
1answer
1k views

ifconfig ignores alias on IPv6

When I add an IPv4 address for the interface eth0:0 with ifconfig, it is created correctly: ifconfig eth0:0 add 192.168.10.10 This can be verified by ifconfig or "ip a". When I add an IPv6 address ...
1
vote
1answer
461 views

linux route command not working

I use route command to add new route in my routing table. But it my new root is not added. Also it doesn't show any error for my command. Here is the console #route add ::/0 via fe::2 route: ...
1
vote
1answer
727 views

Do all IPv4-compatible IPv6 devices have two IPv6 addresses?

Is it possible for an IPv4-compatible IPv6 device to have only one IPv6 address? For example, when device-A talks to an IPv4 device, device-A communicates using its IPv4 address 2.2.2.4. Later, when ...
1
vote
2answers
1k views

How to port-forward IPv6 in m0n0wall?

How do i port-forward IPv6 packets in m0n0wall? For example i want to forward traffic arriving on port 443 of my router to another IPv6 address: Interface: WAN Protocol: TCP External port range: ...
1
vote
1answer
404 views

What are the equivalent IPV6 versions of IPV4 special-use adresses?

I'm trying to make a private network with 5 computers bellow an external ADSL router with NAT, but internally I want to use IPV6. To do this I need to use private special-use IPV6 addresses, such as ...
1
vote
1answer
693 views

How to reach a Global Scope IPv6 host?

I have setup DNS64+NAT64 on a machine with 2 interfaces: eth0: public IPv4 address (connected to outside world) eth1: global scope IPv6 address: 2001::/64 I can successfully use ping6 google.com on ...
1
vote
1answer
6k views

Accessing non-port80 web server using IPv6

In a normal IPv4 network, I can go into any browser such as Firefox and browse a server on a IPv4 address not hosted on port 80: http://192.168.42.6:8080/ This accesses the server on port 8080 on ...
1
vote
1answer
26 views

Deplying IPv6 across multiple interfaces with one 6in4 tunnel

I've got a 6in4 tunnel from Hurricane Electric at home which gives me IPv6 connectivity one interface, br0. I'd like to offer IPv6 connectivity on a separate interface as well, br1. How do I enable ...
1
vote
1answer
23 views

IPv6 multicast address for all nodes on network

I've got a basic network with 3 nodes (VM's). One node publishes an event, the other nodes listen for it and print something when received. It used to work one-on-one (so node gives event to each ...
1
vote
1answer
34 views

Is it possible to setup a private IPv6 subnet and route to the Internet?

I am still trying to figure out how IPv6 works. But I had a question. I currently have an pfSense firewall attached my Comcast service and configured with to request a v4 and v6 WAN address from ...
1
vote
1answer
29 views

ipv6 route add issue while adding a particular nexthop address

// IPv6 route add issue in kernel for a particular subnet...(1000::)...why? // Adding ipv6 route : sudo /sbin/ip -6 route add 1005:1006:1007:1008::1/64 via 1001:1002:1003:1004::1 dev eth0 RTNETLINK ...
1
vote
2answers
94 views

Linux Networking: How to forward incoming IPv6 connections from the internet via a second IPv4 interface to other computers in a local network?

I have some kind of Debian server-gateway-zombie that has two network interfaces: eth0 and wlan0 (yeah, wlan0... I know.). eth0 is connected to a internet cable modem that assigns an IPv6 address to ...
1
vote
1answer
26 views

Choose different host part during IPv6 auto configuration

My Internet provider assigns dynamic IPv6 prefixes, which changes every few days. Is it possible to change the host part during auto configuration, e.g. using the prefix from the router ...
1
vote
1answer
66 views

IPV6 and MAC discovery

Is there a way to get the MAC and IPV6 Global link address for the network, just as ARP does with IPV4 in Ubuntu. I tried to retrieve IPV6(Link Local Address) using THC-IPV6 tool. But retrieving MAC ...
1
vote
1answer
386 views

radvd is not assigning prefix

I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. ...
1
vote
1answer
69 views

How is IPv6 stateless autoconfiguration supposed to be used?

I've been using IPv6 for many years now, but it wasn't until I switched ISP recently (and with that, from 6to4 to 6rd) that I found out that stateless autoconfiguration only works on /64 subnets. I ...
1
vote
1answer
62 views

Vanity IPv6 address with SLAAC

I would like to force the second half (the interface identifier) of my link-local and SLAAC-configured global addresses to not be derived from my MAC address or completely random (from privacy ...
1
vote
1answer
2k views

No IPv6 with Asus RT-N56U

Consider the following: My ISP have native IPv6. When I plug directly into ethernet port on my motherboard I have IPv6 connectivity, everything is configured automatically, and works fine. But when ...
1
vote
1answer
871 views

Internet Connection frequently dropping on Ethernet

My internet connection is frequently dropping on Wired Lan (Ethernet) but the wireless works fine without any problem. It's not an issue of Internet Speed as Internet works fine in Windows. ifconfig ...
1
vote
1answer
86 views

Use sixxs subnet on one machine

I've got a sixxs subnet with aiccu on my debian vps, and want to use the complete subnet at my vps. Currently only the 2001:4dd0:f000:000f::2 is usable. My config: (ip a) 3: sit0: <NOARP> mtu ...
1
vote
1answer
158 views

Dynamic DNS with Dual-Stack IPv4/IPv6

In the past, I have been providing services (i.e. HTTP, VPN, etc.) on my network via port forwarding. Each service has its own domain name (i.e. home.domain.name, deluge.domain.name, vpn.domain.name, ...
1
vote
1answer
477 views

NAT with IPv6 (Forced by ISP)

My ISP has recently decided that "high bandwidth clients" are now forced to use IPv6. While I can plug my laptop with Win7 directly into the modem and I have access, connecting routers or my ...
1
vote
1answer
745 views

OpenVPN 4in6 or 4over6 tunnel

My ISP sucks. It gives me an IPv6 Address and an IPv4 one, but IPv4 is down 50% of the time (I can't access any IPv4 Services every 10 minutes)... As I already have an OpenVPN Server set up, I asked ...
1
vote
1answer
189 views

What prevents my ISP from assigning me a dynamic IPv4 address and static IPv6 address(es)? [closed]

Till now I never heard of an Internet Service Provider anywhere on the world, that assigns static IPv6 addresses besides the one dynamic IPv4 address, to private customers. Is there a technical ...
1
vote
1answer
612 views

what's IPv6 analogue for IPv4 `arp -an` and “arp who-has”?

In IPv4 world, when you want to talk to another computer, you ask which MAC address claims a given IPv4 address, the arp who-has ... tell ... exchange as per tcpdump, and a cache of such mappings from ...
1
vote
1answer
324 views

Quality of service in IPV6 [closed]

IPv6 was developed to solve some of the problems of IPv4, such as QoS. We know in IPV4 based on TOS values, a packet would be placed in a prioritized outgoing queue,or take a route with appropriate ...
1
vote
1answer
366 views

Win 7 IPv6 default Routes

I am using a DHCPv6 server (Dnsmasq) to assign IPv6 address in my LAN. My configuration works, but I am unable to ping the DHCPv6 server. The route information on host machine does not contain a route ...
1
vote
2answers
4k views

Teredo won't enable on domain-joined Windows 7 system

I'm trying to enable Teredo on a Win7 SP1 x64 system, in order to provide Remote Assistance for a system outside the local network. The local system is joined to a 2008-level domain which I have full ...
1
vote
1answer
235 views

Why do I need a managed switch and which one should I buy?

I bought a 2nd router and I want both routers to have direct WAN access to the modem. One of the 2 routers directs VOIP traffic to a telephone line port. This VOIP service is provided by the cable ...
1
vote
1answer
635 views

How to configure IPv6 routing from other computers to Teredo client in Linux

My computer (also router) uses Teredo to access and be visible on IPv6. How to assign neighbor IPv6 addresses to other computers for them to be able to be routed to Teredo using the router? What ...
1
vote
1answer
91 views

What protocols will/are ISPs use for IPv6 deployment?

Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) ...
1
vote
1answer
2k views

Why is IPv6 ping failing to access google.com?

I have found that ping google.com from my Windows 7 box has stopped working. Below is the output - note that the IPv4 ping works, and Yahoo works. Is my local router at fault here? ...
1
vote
1answer
1k views

IPv6 local address in hosts file

I have set up a local domain on my Apache server. Then I added the following line in my /etc/hosts file ::1 exampledomain.local After I trying to navigate to it, (I tried ...
1
vote
1answer
1k views

Failed to fetch security.debian.org on Windows host

I am using 64-bit Debian 6.0 (squeeze) from a Windows 7 64-bit VirtualBox host, but I'm unable to successfully ping security.debian.org from both the guest or the Windows host. E.g., from the ...
1
vote
1answer
5k views

Setting Remote Desktop to allows IPv6 connections

Setup: Basically I have 3 machines (2 virtual and 1 physical) that I would like to be able to RDP in to from outside my NAT (a router). The VMs are Windows 7 and Windows XP, both fully patched ...
1
vote
1answer
469 views

IPv6 on ASUS WL-520GU or other

It's coming this summer. IPv6!!! This DD-WRT tutorial is information overload for me. I can't tell if this would be supported on my ASUS WL-520GU, and I don't see a clear way to make it a secure ...
1
vote
2answers
10k views

How can I make localhost resolve to 127.0.0.1 instead of ::1?

When I ping localhost the address resolves to the ipv6 loopback of ::1 My MySQL and Apache installations expects the ipv4 address of 127.0.0.1 How can I configure my WindowsXP to resolve localhost ...
1
vote
1answer
492 views

enabled IPv6 but [::1] is not working

Windows XP with IE 7 http://localhost works. http://127.0.0.1 works. http://[machinename] works. http://[::1] does not work. A separate W2K3 machine works with all four addresses. I did the same ...
1
vote
2answers
216 views

issues switching to IPv6

Currently have a local LAN with one WindowsServer2003 machine and several XP machines. Everything works normal, users can share folders, etc. Decided to install the IPv6 protocol on all machines, ...
1
vote
1answer
92 views

Anyone use uncommon DSL providers? [closed]

I'm considering switching my DSL provider from verizon to another DSL provider that seems to offer multiple IP addresses to its customers (for not a huge amount of money). I'm also interested in ...
1
vote
2answers
660 views

netcat is blocked, telnet gets connection

I'm trying to install an svn server on my linux machine (ubuntu 9.04). I copied a line to start svnserve to the inetd.conf file and restarted inetd. But I'm not able to connect with an svn client to ...
1
vote
1answer
840 views

Fixed dhcp ipv6 lease with windows seven?

Here is my setup: my isp provides me with a /64 ipv6 adress (a real one, not through an ipv4 tunnel or whatever) in addition to my ipv4 my router provides the ip with dhcp over my home network. I ...
1
vote
1answer
1k views

IPv6 autoconfigure on Windows XP

I read this from Running IPv6: C:\>netsh netsh>interface ipv6 netsh interface ipv6>show addres Querying active state... Interface 6: Local Area Connection 3 Addr Type DAD State Valid Life ...
1
vote
0answers
80 views

Only Google, Facebook, Wikipedia and select other sites loading

I have a new Speedport 724v Type B router which reports that it is successfully connected to the internet. The problem is: only Google, Facebook, Wikipedia, and a select few other websites load. Most ...
1
vote
1answer
37 views

Different servers on the same port ipv4 / ipv6

Say I have two TCP servers A and B. A is an ipv4-only server listening on 127.0.0.1:10000. B is an ipv6-only server listening on ::1:10000. Can I start these on the same machine? That is, how are IP ...