0
votes
2answers
30 views

Two Routers - 1 Port Straight to First Router

At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I ...
0
votes
0answers
14 views

How do I open Google Hangouts ports on my home router?

I found this article to optimize Hangounts: https://support.google.com/a/answer/1279090?hl=en I'm supposed to open up a UDP port range for best results. I have a Linksys E3200 router which has a port ...
0
votes
1answer
50 views

Limited WAN speed through Linksys E4200 running DD-WRT

Today we have upgraded our internet connection from 90 Mbps to 180 Mbps, only to find out speedtest.net will not give a result higher than ~96 Mbps. If I connect directly to the modem, bypassing the ...
1
vote
0answers
28 views

Accessing a FTP Server

I am facing a baffling problem. For the past month I have used an FTP server, running Ubuntu Server 14.04 and it has worked flawlessly. During that time I was using an old Apple router from the early ...
2
votes
1answer
66 views

Configure DD-WRT router behind a Cisco cable modem

I have a Linksys WRT54GS router flashed with DD-WRT that I'm trying to get a connection on behind a Cisco DPC3010 cable modem. I can get a connection just fine when I plug my computer in directly ...
0
votes
0answers
10 views

confusion on QoS features on linksys

I own a linksys WAG120N router at home which connects a few computers to each other and to the Internet. I typically stay so close to it and using cat 5 between my laptop and the router. My sis ...
0
votes
1answer
27 views

How to recover my router

I was trying to create wireless mesh network on linksys wrt54gl and changed the subnet mask to 255.255.255.255 by mistake. Now I can't access my router. The reset is not working since I flashed the ...
0
votes
1answer
212 views

Configuring a Wired Access Point - Linksys WRT54G

For the last few weeks I have been trying to configure a wired access point. Eventually I want this to be wireless, but I thought best start with wired. Below are some details Hardware Broadband ...
1
vote
0answers
41 views

Router slowing down to a crawl

Recently I upgraded my 2Mbps ADSL connection to a 6Mbps ADSL2+. Ever since this has been happening: After a router reset, the connection from modem to router is at a speed of 6Mbps for around 15 ...
1
vote
1answer
87 views

Will the dd-wrt Big build run on my Linksys WRT54GL?

I have a Linksys WRT54GL access point acting as a NAT router, with the inside network being my house's wireless and the outside network being a point-to-point link to my DSL gateway. My ISP is Telmex ...
0
votes
1answer
248 views

Router using different ip address when modem is in bridged mode

I have a zyxel modem/router that is blocking my voip, and so I want to put it into bridge mode. When in bridge mode, I use my own router, and my voip works fine. We have 5 static ip addresses at our ...
0
votes
1answer
477 views

linksys e1000 and wrt120n setting up a wireless access point or repeater

I have a linksys e1000 as my primary router in my house, however my house appears to be to large to pull good signal from across the house and up the stairs. So I need to setup some time of access ...
0
votes
0answers
90 views

Router issue with Linksys EA2700

I have a linksys EA2700 router and I'm running into an issue where every night at around 10:00 PM usually, my router becomes extremely sluggish. During this time loading a page can take 2-3 minutes ...
0
votes
1answer
56 views

Linksys Ethernet switch holds five computers or not?

I have a Linksys Ethernet switch conected to the Internet. The switch works fine with two computers. My problem is when I try to connect another two computers, then nothing works. The switch has five ...
0
votes
1answer
231 views

Slow copying files from Linksys EA6700

Copying files to the external hard disk of the Linksys EA6700 WLAN router via LAN is about 3 MB/s, but copying it back via LAN is only 250 kb/s. One file, file size ~ 10 MB. It doesn't matter which of ...
1
vote
1answer
1k views

No DHCP Lease with a new SB6141 Modem and a Linksys Router

I'm trying to help a friend remotely with an internet connectivity problem. His internet went down this morning and the cable company had him switch to a Motorola Surfboard SB6141 modem from an older ...
2
votes
1answer
393 views

I set my router to only allow access through HTTPS, and now I can't access it. Can I fix this without resetting the router completely?

I have a Linksys E1000 router that I access through http://192.168.1.1. I set it to only allow access through HTTPS, and now when I try to access it through the web interface at https://192.168.1.1 in ...
0
votes
0answers
418 views

Wireless range extender stops working

I have a Linksys WAP300N that is running in wireless range extender mode. I have a Thomson TG 798vn connected to the phone line using an adsl splitter. The Thomson has the wireless network turned on. ...
0
votes
1answer
514 views

Can't access set-up page for my access point

This is actually part of a bigger problem, but I thought I'd go step by step. I'm trying to update the firmware of my Linksys WAP54G access point. But I can't access the set-up page. I've followed all ...
1
vote
1answer
694 views

Should a wired router be noticeably slowing down an Internet connection?

I have a fairly old (maybe ~8 years) Linksys Etherfast BEFSR81 V3 10/100 wired 8-port router. Under my old cable internet plan, I would get about 15Mbps on any device using the router, which I figured ...
0
votes
0answers
78 views

Extending a Wireless Network with a WRT54GL

I have the following: Ethernet cable (Only one) Desktop Computer WRT54GL Router Wireless Internet (can't connect to it via Ethernet, only wirelessly) Laptop I want to connect my Laptop wirelessly ...
0
votes
1answer
98 views

Timeout on specific domain when using Linksys WRT54GL router

I cannot access http://download.blender.org from within my home network. I have Linksys router (WRT54GL) switching into 2 PCs with ethernet cable and also wireless enabled (which I use in my Android ...
0
votes
1answer
244 views

Router “ghost” connections

My Linksys WRT54GS2 V1 has begun to display ghost wired connections in the last weeks. As you can see from the images I have nothing connected except for the power cable. I have tried a hard reset ...
0
votes
1answer
241 views

Remote access Linksys WAG200G, not through WAN

I have a network based on a SpeedTouch 706 modem/router, provided by my ISP. It is not possible to turn off NAT or DHCP on this device. Since it lacks wireless functionality, I added a Linksys ...
4
votes
1answer
4k views

Does giving two bands in a simultaneous dual band wireless router the same SSID double the bandwidth for a wireless connection?

I am sharing my wifi with a Linksys E2500 router, which allows you to name each frequency (2.4 GHz, 5.0 GHz) of wireless network a different name. A user told me that if each band has a different ...
2
votes
1answer
2k views

How do I configure my wired router to get its internet connection from another computer?

I'm connected to the internet wirelessly (via xfinitywifi) on one laptop and I want to share that internet connection via a Linksys BEFSR41 wired router. So far, I've tried to connect the ethernet ...
1
vote
1answer
155 views

Why can't I access internet via my router?

I have a Linksys E3000 router that I'm trying to set up. I've connected the cable from my ISP to the Internet port of the router, and accessed its GUI via the wireless connection (had no other cable). ...
0
votes
0answers
154 views

Access router from ADSL modem

I have the following set-up: Linksys WAG320N modem-router connected to the internet via RJ11 Gateway IP for WAG320N is 10.0.1.1, subnet mask is 255.255.255.0 Static IPv4 address for my EA6500 router ...
0
votes
1answer
4k views

Send message to all computers connected on my Linksys router

Is there a way I can configure my router to be able to send message to all computers connected to it via WiFi. For instance i tried using msg * "Message" however it seems no one is getting any. I ...
0
votes
1answer
99 views

Is there any reason to upgrade from a Linksys WRT54G from a security perspective?

I'm currently running a Linksys WRT54G with the latest firmware. I was recently thinking about newer routers and I realized that aside from new features (usb drives, media, etc) and faster speeds ...
0
votes
1answer
82 views

Upgrading a router with multiple antennas

I own a fairly decent but now antiquated Linksys WRT54Gv6 that I wish to upgrade with newer antennas for something of a specialized purpose. I wish to be able to extend my existing wireless network ...
0
votes
1answer
3k views

Connecting ROKU to Vpn/Proxy while all other home computers connect normally

I was wondering if its possible to have one LAN IP access the web through a proxy while the rest are untouched. Since I am in Canada I would like to be able to use my Roku through a US proxy. Or is ...
0
votes
1answer
139 views

Setup Linksys 3200 remote access

I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I ...
0
votes
1answer
369 views

Wireless internet not working with two devices simultaneously

I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit). I have been using this router for 3 months. I was able to use the internet on both devices simultaneously ...
0
votes
1answer
113 views

Why does Windows constantly ping wireless network bridge?

I was looking at a Wireshark capture off my Windows XP box, and I noticed a rather curious behavior. Every 1-2 seconds, the machine sends a ping request to my Linksys WET610N wireless network bridge, ...
0
votes
1answer
202 views

NAT on MAC-filtered network

My ISP (Hyperion S.A.) provides internet using a UTP cable with MAC filtering. I'm trying to set up a router so that I can connect multiple computers to the network. Most computers would connect ...
1
vote
0answers
308 views

Setting WiFi Client gateway, ip address, subnet etc on linksys router

I have a linksys wireless router which I use is a switch, not an internet router, inside an office in an office building. We have certain settings we have to setup for every client computer in order ...
0
votes
0answers
472 views

Is there a way to clear the cache for router?

I'm not sure where to ask this kind of question now but I'm really getting frustauted because it's Sunday and the provider off for today. I'm using LinkSys WRP400 and the problem I had is that I ...
0
votes
1answer
360 views

Linksys WRT54GC wireless connection doesn't work

I Have a Linksys WRT54GC router which I use as a switch. Recently I have been able to connect to the wireless connection, but I can't access the router or the internet. Computers that are using it as ...
0
votes
0answers
598 views

How to monitor internet traffic on a Linksys E3000 router

I just got optical fiber installed in my place which gives me great download speeds. Now my ISP has a monthly download limit of 120GB, after that I gotta pay overages. Now my setup is like this: ...
1
vote
0answers
152 views

N300 Capable wifi, with approriate router, why am I only getting 150kb/s on local transfers?

I have recently purchased the new Linksys E4200 which quotes Simultaneous Dual Band full N300 speeds. It should be amazing. Through wired connections, it is amazingly fast. I didn't shell out 300 ...
0
votes
1answer
102 views

Connect two Network segments -> Does not work

I have the following networks: 192.168.174.0 192.168.50.0 Now both network segments are created by a Cisco Linksys VPN Router. To both network segments we can connect through a static IP via VPN. ...
4
votes
2answers
2k views

Use hostnames to connect to machines on LAN

I have just had my broadband upgraded to FTTC which means my router has had to change. Previously I was using a Thomson TG585v7 ADSL thingy provided by my ISP. One nice thing about that router was ...
1
vote
2answers
389 views

Connect to 2 Networks simultaneously?

I have here 2 wireless networks with a linksys wrtg54 access points. Each network has its own dsl line. Is it possible to connect to the networks simultaneously? I want to be able to access all the ...
2
votes
3answers
348 views

Very strange networking problem in all computers in my house

I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications, and yesterday they had a major outage. I know it was them because I called them up ...
1
vote
3answers
2k views

Why does my ADSL disconnect sometimes?

I have a Linksys wireless ADSL modem. Sometimes I find that my Internet access is lost, so I'm forced to either: Turn off the wireless application on my laptop and back on again Turn off the modem, ...
4
votes
5answers
2k views

Viewing the bandwidth usage of a wireless device connected to my router

I just want to figure out which wireless client is sucking my bandwidth (it's slowing down my Starcraft games :-/). I have a Linksys WRT54G router (Linux version). For firmware, I'm currently using ...
0
votes
1answer
549 views

Windows 7 network identification is slow with linksys switch

I have a small network with a Linksys SRW224P switch, some windows 7 client machines and a Netgear FVX538 Prosafe VPN Firewall. Now when i plug in a network cable into one of the windows 7 machine it ...
0
votes
2answers
1k views

How to replace old Linksys router with a new Linksys router and configure the new one?

I'm not a network admin but i've a basic understanding in networks. We are using a lease line for internet in our office and we are using Linksys router to route it to Vonage (VoIP) and Netgear. Our ...
0
votes
1answer
725 views

setting up a private network using linksys router

Scenario: A database server running SQL Server 2005 Express and SQL Server Management Studio 2005 Express Edition, and a web server running IIS 5.0 using Windows XP Professional. There are also two ...