Tagged Questions

0
votes
0answers
41 views

Why can't I access internet via my router?

I have a Linksys E3000 router that I'm trying to set up. I've connected the cable from my ISP to the Internet port of the router, and accessed its GUI via the wireless connection (had no other cable). ...
1
vote
1answer
40 views

Wireless G vs N Network

Just wondering if anyone could tell me any tips about a router issue. I previously has a Linksys G network router and ended up having some issues with it as it was getting older. I went out and ...
0
votes
0answers
32 views

linksys 4200 router: slow, declining intra-lan transfer speeds (lan to lan)

I have a linksys 4200 router, connecting a network storage drive to my laptop. When I initially copy files, the intra-lan speed begins at a very healthy 2.8MB/s. But then degrades to ~400KB/s over ...
0
votes
1answer
43 views

WEP Passphrase mode on Linksys BEFW11S4

I have an old Linksys BEFW11S4 that I am using for LAN file transfers when I am on the road and my phone has a 3G connection. It has an option for WEP security, but it defaults to converting a ...
0
votes
0answers
42 views

Access router from ADSL modem

I have the following set-up: Linksys WAG320N modem-router connected to the internet via RJ11 Gateway IP for WAG320N is 10.0.1.1, subnet mask is 255.255.255.0 Static IPv4 address for my EA6500 router ...
0
votes
0answers
33 views

Trouble accessing remote sql server 2012 from home network

I am having trouble accessing a remote sql server 2012 instance that my web host has setup using the default port of 1433. I am able to connect fine if i connect my computer directly to my modem, but ...
0
votes
1answer
110 views

Send message to all computers connected on my Linksys router

Is there a way I can configure my router to be able to send message to all computers connected to it via WiFi. For instance i tried using msg * "Message" however it seems no one is getting any. I ...
0
votes
0answers
88 views

Linksys router webpage/control-panel inaccessible

I tried to access my WRT120N's webpage through the default 192.168.1.1 (LAN connection). Not being able to login (I'm unsure if I ever changed it from the default though), I did a hard reset on the ...
0
votes
1answer
54 views

Linksys Router Remote access to LAN network, Static Routes

I am trying to set up remote access to a controller on my LAN-side network from off-site. I can hit the remote access page of the router, but I am unable to hit any of my equipment on the LAN side ...
0
votes
1answer
54 views

Is there any reason to upgrade from a Linksys WRT54G from a security perspective?

I'm currently running a Linksys WRT54G with the latest firmware. I was recently thinking about newer routers and I realized that aside from new features (usb drives, media, etc) and faster speeds ...
1
vote
0answers
127 views

barebones features for a DD-WRT router acting as PPTP server

I have a little router (Linksys E900) only to act as a VPN server. I have a decent router behind it, handling radio anyway. So I am happy to relegate any other CPU-intensive stuff to the bigger ...
0
votes
0answers
90 views

unknown MAC address on the LAN DD-WRT router

I am using a linksys router with DD-WRT firmware with a WiBro internet connection, the ISP uses a hub with multiple user connected to it. The issue is that an unidentified MAC address seems to pop up ...
0
votes
0answers
79 views

Setup Lynksis G WiFi router to support 20mb connection

I have a Lynksis WIFI router and up until last week I had 1mb fiber optic connection. Today we switched to 20mb/20mb fiber optic connection. I noticed right away that internet connection speed did ...
-1
votes
1answer
53 views

How do I raise the ping of one of my ports on my Linksys Cisco WRT160N v2 Router?

I'm a real newbie when it comes to computers, internet, networking, etc. but I'm an avid gamer. And I play a game (on my PS3) which plays best at a higher pings (slower speeds) for some reason beyond ...
0
votes
1answer
253 views

Can't completely reset Linksys E1200

I purchased a Cisco Linksys E1200 router, and I opted out of the Cisco Connect software. Once I did that, I was able to set the WPA2 password. Now, when I go to log in to the administration area of ...
1
vote
1answer
112 views

Wireless Access Point stopped working unexpectedly

I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the ...
3
votes
1answer
850 views

Can only ssh when not using wifi

So I have 3 machines, a windows 7 desktop that is always wired to my router, osX laptop, and raspberry pi running debian linux. My router is a Linksys e1000 wireless N. My goal is to be able to ssh ...
0
votes
1answer
92 views

Setup Linksys 3200 remote access

I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I ...
1
vote
1answer
157 views

Why is this access point not functional on my home network?

I have a Linksys WRT54G as my primary router, and it's hooked into the modem, and everything with that is groovy. Additionally, I have a NETGEAR WG602 which is meant to give internet to the upstairs ...
0
votes
0answers
96 views

VoIP Call Forwarding errors, inbound / outbound calls fine

I've got a Siemens Gigaset C470IP phone system in my office, and it's connected to a Linksys X3000 router. When I'm not in, I would like to set up the phone to automatically forward all calls to my ...
4
votes
1answer
311 views

I am looking to expand my Wi-Fi range using two Linksys routers. How do I go about this?

Most of the computers in the house are used up to a maximum of five or six feet of the router. However, my iPad cannot get a good signal through a couple of walls. Here's what I have: Linksys ...
0
votes
1answer
161 views

Wireless internet not working with two devices simultaneously

I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit). I have been using this router for 3 months. I was able to use the internet on both devices simultaneously ...
1
vote
2answers
2k views

Can't connect to Linksys E2000 router admin interface: Connection refused

I am trying to connect to our router on 192.168.1.1 (correct IP) directly plugged in via Ethernet cable. Connection via Firefox simply gives the can't establish a connection to the server error. ...
0
votes
1answer
85 views

How do I forward the SAME port to 2 Computers in router linksys E1000

I cloned my question from here I use linksys router E1000. I have 2 server Ubuntu in 2 Computer, and I want to forward its over the internet at the same time (same port is 80). How do I forward the ...
2
votes
3answers
302 views

I have to restart my router every hour or so for wireless to work

So this has started to become a norm in the past week. I have several devices connected to my router and most of them do so wirelessly, but a couple uses the ethernet port. About every hour my ...
0
votes
0answers
84 views

Portforwarding - doesn't save ports

Ok like the title says, I'm trying to portforward a couple of ports in my Linksys router. This is for my playstation so it's a couple of ports but I looked everything up. So bassicly I give in the ...
1
vote
1answer
135 views

local network speed on wrt54gl

I have a bit of a problem that needs some explanation or advice on how to improve if possible. My setup is the following: [Interwebz]==cable==[CABLE MODEM]==cat5==[WRT54GL]==2 PCs Linksys WRT54GL ...
0
votes
0answers
349 views

Linksys e3200 connectivity issue (most likely DHCP server configuration)

I have a Linksys E3200 router with a connectivity problem. The router doesn't allow the creation of connections for some reason. I can get the SSID of my wireless networks but when I try to connect ...
1
vote
3answers
625 views

Slow connection on WRT160N or WRT54G

I have a WRT160N V3. I'm getting 10Mbps from the wired connection and when I bypass it I get 18Mbps (what I pay for). The strange thing is that when I update the firmware or reset configurations it ...
0
votes
3answers
2k views

How to determine Linksys router's IP when it is in gateway mode?

I have a Linksys WRK54G router that has previously been configured for Gateway mode, but I would like to access the web interface to the gateway but cannot determine its IP address. How can I figure ...
0
votes
0answers
58 views

How to access the router log for given dates

How do you access and print the router log for given dates from a Cisco / Linksys wireless router? We need the October 1-2, 2011 log entries to fight an uploading allegation. Thanks.
2
votes
2answers
2k views

Accessing a router which isn't a DHCP server

I have a Linksys WRT54GL router with Tomato installed on it. My network configuration requires me to disable the DHCP server on the router. After disabling it, I do not know the IP of the router ...
0
votes
2answers
3k views

Installing TomatoUSB on a Linksys WRT54GL?

I don't know whether I'm missing something obvious here, but when I download the TomatoUSB 2.6 VPN build (from here), and try and install the included .trx file in the default Linksys router "Firmware ...
1
vote
0answers
345 views

Prevent Overloading of Router on Large File Transfer

Okay, so I had some router issues when trying to move a lot of stuff to my new FreeNAS server a few days ago. I'd like to find a way to prevent overloading my router in the future. Here's what I have: ...
1
vote
3answers
298 views

Overloaded Router, Can't Connect To Internet?

I was transferring about 30gb of files to my home server and streaming some music from soundcloud. I've never tried putting so much bandwidth through my router at once before, and basically everything ...
0
votes
0answers
314 views

Is there a way to clear the cache for router?

I'm not sure where to ask this kind of question now but I'm really getting frustauted because it's Sunday and the provider off for today. I'm using LinkSys WRP400 and the problem I had is that I ...
0
votes
1answer
284 views

Linksys WRT54GC wireless connection doesn't work

I Have a Linksys WRT54GC router which I use as a switch. Recently I have been able to connect to the wireless connection, but I can't access the router or the internet. Computers that are using it as ...
1
vote
3answers
478 views

Unable to connect to computer name other than for file sharing

I have a computer on my network at home called "shuttle" running Win XP Pro. I can connect to this machine's file shares by visiting \\shuttle and it works fine. However, the machine also has a web ...
0
votes
1answer
3k views

How do I access the Linksys E2000 wireless router setup page

I'm trying to access & configure my wireless router's options. The wireless router is a Linksys E2000 and the default gateway's IP address is 192.168.33.1 I've gotten into the router setup by ...
0
votes
1answer
123 views

Att dsl modem changing my router's dns?

I have a DSL modem provided to me by ATT yahoo DSL. Its a weston brand connected to a linksys router with 4 ethernet ports and wireless. I have the linksys router set to a specified DNS 192.168.0.21 ...
0
votes
1answer
124 views

Could this wireless set up cause this issue?

I have two routers hooked up to a DSL modem. The first is an older Linksys wired router(might be BEFSR41) and the other is a newer Cisco Valet M20. The valet was added on recently to enable WiFi ...
0
votes
2answers
1k views

Accessing Tomato router in bridging mode?

I've flashed my Linksys WRT54GL router with the Tomato 1.28 firmware. This has worked fine, and I set its IP address to 192.168.1.2. I already had a wireless router, but the reason I bought this ...
2
votes
0answers
453 views

Configuring Tomato Web Usage log

I am running Linksys E2000 with TomatoUSB (on the 2nd floor) as a "switch" connected to my main router (d-link 655 with stock firmware on the 1st floor, wireless disabled). All my computers are wired ...
2
votes
3answers
3k views

Reset gargoyle router to default

I have a Linksys WRT54GL router with gargoyle installed. Unfortunately, I've forgotten my password so now I'm trying to reset it. I've already tried the 30/30/30 hard reset method, but it didn't ...
0
votes
0answers
379 views

How to monitor internet traffic on a Linksys E3000 router

I just got optical fiber installed in my place which gives me great download speeds. Now my ISP has a monthly download limit of 120GB, after that I gotta pay overages. Now my setup is like this: ...
3
votes
3answers
2k views

What would cause a router to become very hot?

I have a Linksys E2000 router, and went to move it today. Upon touch, it was incredibly hot, and this concerned me greatly. I restarted it, and it seems to only be creating a little bit of heat now. ...
0
votes
3answers
1k views

Is there a way to tell which computer is hogging up the wireless bandwith?

I have a wireless router in my house and it's shared by five different computers and 2 iPhones. Lately I've noticed the speed drastically shoot down. Naturally, I though someone else was in the ...
1
vote
3answers
1k views

Can I run a router with a lower voltage power adapter?

The power adapter for my Linksys WRT54GL v1.1 router died - its output was 10V, 1000mA. I've tried using a replacement adapter (7.5V, 1000mA) and so far it works. Is this situation stable, or should ...
0
votes
2answers
1k views

using a linksys wireless-g router with verizon dsl modem

I am currently using: Westell 6100 verizon dsl modem Linksys wireless-g router I can't get the router to connect to the internet with wired or wireless connection when linked to the modem; but ...
2
votes
1answer
2k views

Running a LinkSys WRT400N router with 3rd party firmware

Does anyone have any experience with the LinkSys WRT400N router and installing 3rd party firmware on it? Is there a more stable choice between DD-WRT and Tomato? Any benefits one way or the other? ...

1 2 3