Once a company in its own right, Linksys is a brand of home and small office networking products by Cisco Systems.
0
votes
0answers
96 views
VoIP Call Forwarding errors, inbound / outbound calls fine
I've got a Siemens Gigaset C470IP phone system in my office, and it's connected to a Linksys X3000 router. When I'm not in, I would like to set up the phone to automatically forward all calls to my ...
0
votes
0answers
71 views
Advice on revising settings on old Linksys router to work with replacement D-Link DSL modem [closed]
replacing old Speedstream 5260 Modem with D-Link DSL-520B modem.
Both modems work when connected directly to Apple machines with NO router.
Original configuration of Linksys router + Speedstream ...
0
votes
2answers
1k views
at the end of my wits with Linksys RE1000
I have a Linksys E3200 main router and Linksys RE1000 range extender, which keeps dropping its connection to the router dozens of times a day. I have researched this on Google for quite a while and no ...
1
vote
1answer
260 views
Atheros AR9285 not working with Linksys RE1000
I have a Linksys E3200 extended with a Linksys RE1000 repeater to which an ASUS EEE PC with Atheros AR9285 is trying to connect to. If I connect the ASUS to the E3200 everything works fine. However if ...
4
votes
1answer
317 views
I am looking to expand my Wi-Fi range using two Linksys routers. How do I go about this?
Most of the computers in the house are used up to a maximum of five or six feet of the router. However, my iPad cannot get a good signal through a couple of walls.
Here's what I have:
Linksys ...
0
votes
1answer
166 views
Wireless internet not working with two devices simultaneously
I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).
I have been using this router for 3 months. I was able to use the internet on both devices simultaneously ...
1
vote
1answer
1k views
DD-WRT DNS lookup failure
I'm trying to configure a new router (a Linksys WRT160Nv3) with DD-WRT. It seems that no matter what the settings, DNS lookups fail. I can't ping anything outside my network (I get an unknown host ...
1
vote
2answers
2k views
Can't connect to Linksys E2000 router admin interface: Connection refused
I am trying to connect to our router on 192.168.1.1 (correct IP) directly plugged in via Ethernet cable.
Connection via Firefox simply gives the can't establish a connection to the server error.
...
0
votes
1answer
79 views
Consumer Switch MAX Throughput [closed]
So I am trying to find the specs on consumer switch I am thinking about buying but as it is consumer product...not a lot of info.
I am a Cisco Engineer which makes this all the more aggrevating...for ...
0
votes
1answer
85 views
How do I forward the SAME port to 2 Computers in router linksys E1000
I cloned my question from here
I use linksys router E1000. I have 2 server Ubuntu in 2 Computer, and I want to forward its over the internet at the same time (same port is 80).
How do I forward the ...
2
votes
4answers
11k views
How to find the static ip address of my router?
I bricked my Linksys WRT54GS router when trying to change the firmware on it from dd-wrt to open-wrt. In order to unbrick it, I need to be able to do an ftp transfer to it.
The problem is that it ...
2
votes
3answers
308 views
I have to restart my router every hour or so for wireless to work
So this has started to become a norm in the past week. I have several devices connected to my router and most of them do so wirelessly, but a couple uses the ethernet port. About every hour my ...
0
votes
0answers
144 views
I have a Linksys wrt54gl router and a USB GSM modem. combinend?
I have a Linksys wrt54gl router and a USB GSM modem. Both working 100%
The firmware on the router is OpenWrt White Russian - with X-Wrt Extentions 9
Kernel: Linux 2.4.30#1
This router has been laying ...
3
votes
2answers
162 views
Can we install 2 access points on the same network with different SSID?
I have a network over 2 floors. i had 1 access point on the top floor and need to put another on the bottom floor but with different SSID & password. can it be possible.. Please Help..
Thanks in ...
0
votes
0answers
87 views
Portforwarding - doesn't save ports
Ok like the title says, I'm trying to portforward a couple of ports in my Linksys router. This is for my playstation so it's a couple of ports but I looked everything up.
So bassicly I give in the ...
0
votes
1answer
89 views
Why does Windows constantly ping wireless network bridge?
I was looking at a Wireshark capture off my Windows XP box, and I noticed a rather curious behavior. Every 1-2 seconds, the machine sends a ping request to my Linksys WET610N wireless network bridge, ...
1
vote
1answer
137 views
local network speed on wrt54gl
I have a bit of a problem that needs some explanation or advice on how to improve if possible.
My setup is the following:
[Interwebz]==cable==[CABLE MODEM]==cat5==[WRT54GL]==2 PCs
Linksys WRT54GL ...
0
votes
0answers
200 views
Convert WiFi range extender to AP
I have a Linksys RE1000 WiFi range extender that might become obsolete soon (being replaced with cables).
I was thinking, since it has an ethernet port and WiFi radio, could it be turned into an ...
1
vote
1answer
308 views
Accessing localhost:8080 through local network
I'm developing a Python WSGI website. I'm running a Paste development server on my Mac (OS X 10.7) on port 8080. I want to test the website on some other devices and OSs I have connected to the ...
-1
votes
1answer
149 views
Setting up a wireless network in dorm room [closed]
I recently got an internship and they put us in a dorm-like place. All the connections to the internet are hardwired through terminals in the wall. I have a linksys e1000 router and I want to set up a ...
0
votes
1answer
151 views
NAT on MAC-filtered network
My ISP (Hyperion S.A.) provides internet using a UTP cable with MAC filtering. I'm trying to set up a router so that I can connect multiple computers to the network. Most computers would connect ...
1
vote
0answers
233 views
Setting WiFi Client gateway, ip address, subnet etc on linksys router
I have a linksys wireless router which I use is a switch, not an internet router, inside an office in an office building. We have certain settings we have to setup for every client computer in order ...
0
votes
0answers
352 views
Linksys e3200 connectivity issue (most likely DHCP server configuration)
I have a Linksys E3200 router with a connectivity problem. The router doesn't allow the creation of connections for some reason. I can get the SSID of my wireless networks but when I try to connect ...
1
vote
1answer
2k views
Can I install Linksys WRT610N V1 firmware from a USB drive?
My Linksys WRT610N V1 has stopped working - the power light keeps flashing. The Cisco website says:
A blinking power LED on your Linksys access point means the firmware
is corrupted or is not ...
1
vote
0answers
2k views
WRT54GL Tomato Router in Client wireless mode to an iPhone Personal Hotspot
I am trying to connect a router with Tomato firmware to an iPhone 4. The goal is to connect to the Personal Hotspot in Client Wireless mode.
This should allow wired and wireless users to connect to ...
1
vote
3answers
631 views
Slow connection on WRT160N or WRT54G
I have a WRT160N V3. I'm getting 10Mbps from the wired connection and when I bypass it I get 18Mbps (what I pay for). The strange thing is that when I update the firmware or reset configurations it ...
0
votes
1answer
559 views
Wi-fi connection times out in a strange way
I have a Linksys Wireless-N Home ADSL2+ router to which I connect my MacBook Pro. The thing is that the connection behaves strangely. Let me explain: from time to time, the internet connection times ...
0
votes
3answers
2k views
How to determine Linksys router's IP when it is in gateway mode?
I have a Linksys WRK54G router that has previously been configured for Gateway mode, but I would like to access the web interface to the gateway but cannot determine its IP address.
How can I figure ...
1
vote
2answers
556 views
Need to open port 5000 on a linksys router to access heroku
I am trying to make this command work:
telnet s1.runtime.heroku.com 5000
When I run it, I get the following error:
Trying 107.20.246.116...
telnet: Unable to connect to remote host: No route to ...
2
votes
0answers
648 views
How to setup “all traffic” VPN on Linksys WRT54GL (DD-WRT) through Thomson ADSL Router
[Apols if I get terminology wrong...n00b to this!]
I have a (pretty unconfigurable) ISP provided Thomson ADSL router - ISP runs PPPoE. I added to this a Linksys WRT54GL router which I want to keep ...
1
vote
1answer
1k views
Router slowing my connection?
I have a Linksys WRT54G and I pay for a 12Mbps connection. I've been testing my connection using speedtest.net for many days and always get 8Mbps.
I called the support and they told me to bypass the ...
0
votes
0answers
58 views
How to access the router log for given dates
How do you access and print the router log for given dates from a Cisco / Linksys wireless router? We need the October 1-2, 2011 log entries to fight an uploading allegation. Thanks.
0
votes
2answers
8k views
How do I revert back to official Linksys firmware from dd-wrt on WRT56G2 v1?
I've been having trouble with dd-wrt on my Linksys WRT56G2 v1 router and want to go back to the stock Linksys firmware for it. The router has only 2MB of flash memory, and so I'm running the 'micro' ...
2
votes
2answers
2k views
Accessing a router which isn't a DHCP server
I have a Linksys WRT54GL router with Tomato installed on it.
My network configuration requires me to disable the DHCP server on the router. After disabling it, I do not know the IP of the router ...
0
votes
1answer
3k views
How to get latest firmware for Linksys Router WRT54G v2
I'd like to get the latest firmware for my Linksys WRT54G v2 router, but the linksys page offers no download firmware for this version.
http://homesupport.cisco.com/en-us/support/routers/WRT54G
Can ...
0
votes
2answers
3k views
Installing TomatoUSB on a Linksys WRT54GL?
I don't know whether I'm missing something obvious here, but when I download the TomatoUSB 2.6 VPN build (from here), and try and install the included .trx file in the default Linksys router "Firmware ...
1
vote
0answers
358 views
Prevent Overloading of Router on Large File Transfer
Okay, so I had some router issues when trying to move a lot of stuff to my new FreeNAS server a few days ago. I'd like to find a way to prevent overloading my router in the future. Here's what I have:
...
1
vote
3answers
311 views
Overloaded Router, Can't Connect To Internet?
I was transferring about 30gb of files to my home server and streaming some music from soundcloud. I've never tried putting so much bandwidth through my router at once before, and basically everything ...
0
votes
0answers
338 views
Is there a way to clear the cache for router?
I'm not sure where to ask this kind of question now but I'm really getting frustauted because it's Sunday and the provider off for today.
I'm using LinkSys WRP400 and the problem I had is that I ...
0
votes
1answer
285 views
Linksys WRT54GC wireless connection doesn't work
I Have a Linksys WRT54GC router which I use as a switch. Recently I have been able to connect to the wireless connection, but I can't access the router or the internet. Computers that are using it as ...
0
votes
1answer
2k views
Need advice on setting up a wireless bridge, both having wireless PCs, without using a repeater?
I wish to setup a wireless bridge between two routers, both of which will have wireless clients; however, I want to do this without using a repeater. I would prefer not to have the bandwidth halved.
...
1
vote
3answers
1k views
Connection problems via Wifi (multiple devices)
I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)...
1) Using my laptop ...
1
vote
3answers
482 views
Unable to connect to computer name other than for file sharing
I have a computer on my network at home called "shuttle" running Win XP Pro. I can connect to this machine's file shares by visiting \\shuttle and it works fine.
However, the machine also has a web ...
0
votes
1answer
3k views
How do I access the Linksys E2000 wireless router setup page
I'm trying to access & configure my wireless router's options.
The wireless router is a Linksys E2000 and the default gateway's IP address is 192.168.33.1
I've gotten into the router setup by ...
0
votes
1answer
2k views
How to set a 5 char (40 bit) ASCII password for WEP on a Linksys v8 device
I have a Linksys FW v8, and I want to use wireless password "12345" for WEP.
I cant set it up, I just can specify a 64 or 128 bit, I want 40 bit, 5 char long.
Is it possible?
0
votes
1answer
126 views
Att dsl modem changing my router's dns?
I have a DSL modem provided to me by ATT yahoo DSL. Its a weston brand connected to a linksys router with 4 ethernet ports and wireless.
I have the linksys router set to a specified DNS 192.168.0.21 ...
2
votes
1answer
542 views
Use Linksys WRT54G to get internet from Cisco E3000 (wifi) to Xbox (ethernet)?
Hoping someone can point me in the right direction...
I have a Cisco E3000 which is the main router for the house (WAN).
I want to use a WRT54G v8.2 to get Internet (from WiFi of the e3000) to my ...
12
votes
4answers
13k views
How do I configure my Linksys routers to resist the WPS brute-force vulnerability?
US-CERT recently released Vulnerability Note VU#723755.
http://www.kb.cert.org/vuls/id/723755
In short, this describes how modern wireless routers can have their PSKs discovered within just a matter ...
2
votes
2answers
2k views
How to troubleshoot Linksys E4200 Remote Management
My Linksys E4200 is configured for Remote Management, but the router is not accepting the connections. Here's the configuration under Administration > Management > Remote Management Access:
Remote ...
0
votes
1answer
125 views
Could this wireless set up cause this issue?
I have two routers hooked up to a DSL modem. The first is an older Linksys wired router(might be BEFSR41) and the other is a newer Cisco Valet M20. The valet was added on recently to enable WiFi ...
