**DO NOT USE!** This tag is slated for deletion See this meta discussion: http://meta.superuser.com/q/8402/107240.

learn more… | top users | synonyms

2
votes
2answers
4k views

How to troubleshoot Linksys E4200 Remote Management

My Linksys E4200 is configured for Remote Management, but the router is not accepting the connections. Here's the configuration under Administration > Management > Remote Management Access: Remote ...
0
votes
1answer
151 views

Could this wireless set up cause this issue?

I have two routers hooked up to a DSL modem. The first is an older Linksys wired router(might be BEFSR41) and the other is a newer Cisco Valet M20. The valet was added on recently to enable WiFi ...
0
votes
2answers
3k views

Accessing Tomato router in bridging mode?

I've flashed my Linksys WRT54GL router with the Tomato 1.28 firmware. This has worked fine, and I set its IP address to 192.168.1.2. I already had a wireless router, but the reason I bought this ...
0
votes
1answer
99 views

gmail not opening on a linux pc after reflashing router from linksys to tomato 1.28

I have replaced the linksys firmware on my wrt54GL with tomato 1.28, and after that I am seeing some really weird behaviour. My windows workstation works just fine, but a linux (fedora 15 x64) laptop ...
0
votes
0answers
308 views

Kernel Panic, Fatal Trap 18, Pfsense WUSB54GC AP crash

I have an old system that I am converting to a pfsense router. I am trying to use a linksys/cisco WUSB54GC as the wireless device for the AP I can get it broadcasting(it uses the rum(4) drivers) but ...
3
votes
1answer
1k views

Configuring Tomato Web Usage log

I am running Linksys E2000 with TomatoUSB (on the 2nd floor) as a "switch" connected to my main router (d-link 655 with stock firmware on the 1st floor, wireless disabled). All my computers are wired ...
0
votes
1answer
1k views

Linksys firmware versions?

I have a Linksys WRT54G and wanted to see if there was any updated firmware available. According to the device, it's running 4.30.13 build 16, date Jul. 1, 2008. The Linksys support site says the ...
3
votes
3answers
10k views

Reset gargoyle router to default

I have a Linksys WRT54GL router with gargoyle installed. Unfortunately, I've forgotten my password so now I'm trying to reset it. I've already tried the 30/30/30 hard reset method, but it didn't ...
0
votes
0answers
823 views

How to monitor internet traffic on a Linksys E3000 router

I just got optical fiber installed in my place which gives me great download speeds. Now my ISP has a monthly download limit of 120GB, after that I gotta pay overages. Now my setup is like this: ...
1
vote
1answer
1k views

Automatically wake W7 PC for fileshares/remote desktop/etc without “magic packet”

I'd like to store all my media (photos/images/videos/music) on a shared network drive on my media PC (hooked up to the TV, it's not often used) for everyone in my home to use, however I'm edgy about ...
1
vote
0answers
191 views

N300 Capable wifi, with approriate router, why am I only getting 150kb/s on local transfers?

I have recently purchased the new Linksys E4200 which quotes Simultaneous Dual Band full N300 speeds. It should be amazing. Through wired connections, it is amazingly fast. I didn't shell out 300 ...
0
votes
0answers
1k views

Can't enable VPN on linux error: VPN connection failed

I have a sony vaio laptop, with ubuntu 11.04 and windows 7 on it. I have configured a VPN connection on ubuntu, in order to connect to my computer at work but it keeps not working, and I get the error ...
0
votes
1answer
305 views

How to change a modem's factory default settings

I have linksys modem (WAG354G) and I will put this modem to far away from home to another house. But I want to use this modem running all the time. In the place where modem will run in, there are ...
1
vote
1answer
4k views

Wifi network SSID not visible

I just bought a new Modem Router (Linksys WAG320N) and set it up using Cisco's included wizard. However, when trying to access my wifi network from my smartphone, I don't see it appear in the ...
3
votes
4answers
16k views

What would cause a router to become very hot?

I have a Linksys E2000 router, and went to move it today. Upon touch, it was incredibly hot, and this concerned me greatly. I restarted it, and it seems to only be creating a little bit of heat now. ...
1
vote
1answer
3k views

Motorola SBG6850 / Linksys WRT54G network problem

I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works ...
1
vote
1answer
1k views

Linksys WRT54GS QoS on wired and wireless

I am going to have two routers set up as described in part 2 here. My main router (connected to cable modem) is a Linksys WRT54GS running Linksys firmware. I want my 'private' network (anything ...
0
votes
1answer
3k views

Connecting Xbox 360 with TP-Link TL-WA500G access point connected to Linksys WRT54GL wireless router

I'm attempting to connect an Xbox 360 console to a Linksys WRT54GL router (wirelessly), using a TP-Link TL-WA500G wireless access point. I've had this working in the past, but I didn't make a note of ...
0
votes
1answer
106 views

Connect two Network segments -> Does not work

I have the following networks: 192.168.174.0 192.168.50.0 Now both network segments are created by a Cisco Linksys VPN Router. To both network segments we can connect through a static IP via VPN. ...
1
vote
1answer
997 views

Memory problem in linksys router with OpenWRT with heavy writing to log files

I have a WRT160NL linksys router with 32MB RAM and with OpwnWRT installed. I have an application running which does some heavy writing to log files to a usb connected flash drive. (basically 26MB a ...
2
votes
1answer
626 views

Xbox 360S setup fails as Media Extender for Windows 7 laptop using E2500 Linksys router

I have a Linksys E2500 router, an Xbox 360S, and a Toshiba Laptop with Windows 7. When I try to use the Xbox as a media extender for the laptop, it fails when I go through the router with the ...
4
votes
2answers
3k views

Use hostnames to connect to machines on LAN

I have just had my broadband upgraded to FTTC which means my router has had to change. Previously I was using a Thomson TG585v7 ADSL thingy provided by my ISP. One nice thing about that router was ...
7
votes
5answers
13k views

Cannot delete folders on a network drive from Windows 7

I have a really strange problem. I am using Windows 7 Professional with SP1 installed. I have a My Book 500GB external hard drive connected to the network via Linksys E3000. Now in Windows 7 I am ...
0
votes
2answers
7k views

Configure WiFi 802.11N access point (Linksys WAP610N)

I bought Linksys WiFi Access Point WAP610N. I had a great access point already..but it didn't support N so I decided to upgrade. Now I configured it somehow and set it to use 5Ghz frequence in ...
0
votes
3answers
3k views

Is there a way to tell which computer is hogging up the wireless bandwith?

I have a wireless router in my house and it's shared by five different computers and 2 iPhones. Lately I've noticed the speed drastically shoot down. Naturally, I though someone else was in the ...
0
votes
2answers
904 views

Do I need to replace my 802.11b router?

When tested on Speedtest.net or something like that, my download speed was less than one megabit per second over my family's secure Wi-Fi connection. The router is a Linksys 802.11b 2.4GHz router and ...
2
votes
1answer
2k views

Connect Linksys WRT54GC to other router via wireless

Is it possible to connect a Linksys WRT54GC router to another Linksys router via wireless? I have 2 routers, but don't have a long enough cable to connect them. They both have wireless, therefore my ...
2
votes
1answer
397 views

Problems with configuring WRT54GL

I have a Linksys's WRT54GL router and when I try to config it I always get the same error: "value is illegal!". The funny thing is that at beginning I have managed to input all the data and it ...
1
vote
0answers
989 views

Firmware flash on Linksys WRT54G v8 unsucessful, but not bricked, I don't think

I wanted to use my Linksys router as a wireless bridge/repeater so I decided I would change the firmware to DD-WRT. The first thing I did was downloaded vxworkskillerGv8-v3 and the DD-WRT firmware ...
1
vote
1answer
209 views

How to make a Linksys to make use of another DHCP to generate IPs

We have a network setup here with Windows Server 2003 machine as our AD, DHCP and domain server. Now I want to connect a Linksys to this network to enable wireless. But I dont want Linksys to act as ...
1
vote
2answers
886 views

Flash Linksys Router with TomatoVPN

Can anyone point me, or help me in the update of Linksys with TomatoVPN? I'm running Tomato firmware; however, when I visit http://tomatoVPN.keithmoyer.com/ I don't see where I can download the ...
1
vote
1answer
869 views

Router comparison

I'm not sure if this is the proper site for this, I wasn't sure which StackExchange site to use for a question of this nature. I am currently trying to compare the Linksys E3200 and the Linksys ...
5
votes
3answers
31k views

What is default password for linksys WRT54GL routers? How to modify it?

What is default password for this user? Is there a way to modify default password so it does not reset when it is rebooted?
2
votes
3answers
2k views

LinkSys wireless router failing DHCP

I have a home network that has an ActionTec Router/DSL Modem plugged into the phone line, with my desktop computer plugged into it. I also have a LinkSys WRT54G2 Wireless-G Broadband Router plugged ...
1
vote
2answers
2k views

Can't browse the internet while downloading 2 or more torrents or connecting to VPN

When I am downloading 2 or more torrents through my torrent client (Transmission on Ubuntu 11.04), I can no longer access the internet. This happens even if I throttle the download and upload speeds ...
2
votes
1answer
968 views

Enabling IPv6 support on a Linksys WRT400N router

I chatted with a Linksys support person and they said that the WRT400N doesn't have any facility for enabling IPv6. If I were to use an alternate firmware on the router, would IPv6 become available ...
1
vote
3answers
3k views

Can I run a router with a lower voltage power adapter?

The power adapter for my Linksys WRT54GL v1.1 router died - its output was 10V, 1000mA. I've tried using a replacement adapter (7.5V, 1000mA) and so far it works. Is this situation stable, or should ...
1
vote
2answers
2k views

using a linksys wireless-g router with verizon dsl modem

I am currently using: Westell 6100 verizon dsl modem Linksys wireless-g router I can't get the router to connect to the internet with wired or wireless connection when linked to the modem; but ...
2
votes
2answers
3k views

How to connect to an IPSec VPN through a LinkSys WRT54GL?

I am having trouble connecting to a L2TP IPSec VPN when I use my wireless router. I have a LinkSys WRT54GL v1.1 wireless router with the most current version of tomato (1.28). I have no issues ...
2
votes
1answer
3k views

Running a LinkSys WRT400N router with 3rd party firmware

Does anyone have any experience with the LinkSys WRT400N router and installing 3rd party firmware on it? Is there a more stable choice between DD-WRT and Tomato? Any benefits one way or the other? ...
0
votes
1answer
582 views

Second router on LAN is connected to other router via PPTP, but one network can't talk to the other

My ISP/Model router is set to 192.168.0.1 My DD-WRT is set to 192.168.0.80. A Linksys WRT300 that was flashed with a DD-WRT.BIN specifically for it (not the generic one). It uses the PPTP ...
1
vote
2answers
404 views

Connect to 2 Networks simultaneously?

I have here 2 wireless networks with a linksys wrtg54 access points. Each network has its own dsl line. Is it possible to connect to the networks simultaneously? I want to be able to access all the ...
2
votes
2answers
2k views

New Lenovo Thinkpad Edge '15 has Worse Wi-Fi Reception Than 2 year old Macbook

Wasn't sure where to put this, so I put it here. I've had the same Router for all my wireless life. The Linksys WRT54GS. Man, It's great, I love it and I'm fine with 802.11g, believe me. I've had a ...
4
votes
2answers
6k views

External ping fails on Linksys router

When I try to ping my server from somewhere other than my local network, if finds the host, but returns as a lost packet. Screenshot from http://tools.pingdom.com: http://cl.ly/1I1c3K0z3Y1I2c3x3R3Z ...
0
votes
1answer
283 views

Maximum number of VPN Tunnels on Linksys BEFSX41?

The subject line is pretty much it. Is there a maximum number of VPN tunnels I can set up into a single Linksys BEFSX41? Right now we have one, but need a second for sure, and possibly more in the ...
0
votes
1answer
2k views

How to fix wi-fi ping hops?

My home network is built using Wi-fi. I ping my home router (192.168.1.1) from PC and receive nice ping time < 1ms. But every 2 minutes ping time gets high ~2000ms and then goes normal again ...
1
vote
0answers
536 views

Can't access my router's web interace

I recently tried to update the firmware of the linksys wrt54g2 v1.5 router and haven't been able to access the web interface of the router since. I can still access the internet and was able to change ...
1
vote
2answers
9k views

WRT610N v2 with DD-WRT: How do I configure wireless for dual channel (N 300MHz)?

I bought a Linksys router WRT610N v2 and I installed DD-WRT build 14896 preSP2 on it. I bought a Linksys Dual Bank Wireless N adapter for my laptop. I have no idea how to configure the router for ...
1
vote
1answer
9k views

Factory reset on a DDWRT hacked router

I installed DDWRT on a linksys router and changed the default ip for the admin login. I'm trying to get back into the router but forgot what ip I changed it to. What would happen if I were to try to ...
1
vote
0answers
182 views

VPN Login on Home Router

I connect to the internet via a Linksys Wireless N Router. I then VPN into my corporate network using the windows XP VPN client. The connection works fine, except after I disconnect, I need to reboot ...