0
votes
0answers
9 views

Command 'at' does not work in one Synology NAS, though it works perfectly on another

I have installed at command on 2 different NAS synology. On 1, it works perfectly, on the other I get the message: Villars1> echo "touch /tmp/tt" | at now next minute warning: commands will be ...
0
votes
0answers
19 views

Synology NAS resume rsync backup after connection loss

I am trying to do a backup from a synology NAS to an offsite NAS. I am using rsync through DSM5 as of now, but it doesn't give me the possibility to resume the backup if a connection loss occurs. This ...
0
votes
0answers
21 views

mount XFS filesystem in ubuntu with permissions

I want to remove data from a Netgear Stora drive that I can no longer access via the Stora itself. The drive appears to be fine, but the Stora is fighting with my router, and it's old and somewhat ...
0
votes
1answer
13 views

How to read a Linux HD from a NAS on a windows machine?

I have/had a Buffalo NAS drive, LS-WSX Series working fine until I decided to clean out the trash folder on the NAS. Since then I can not access the shared folders that I had set up. I have spoken ...
0
votes
0answers
36 views

How to add a user to DSM 5.x without initial password and force setting password at first login (ssh)

I want to add users to my Synology DS214 with DSM 5.0. I'd like to let the password be set by the user at the first login with ssh. How to do this? How can I enforce a certain complexity of the ...
0
votes
2answers
33 views

Partition Hard disk with start sector 1

I have a new Hard Disk which I want to use for NAS drive. The requirement is that the partition as seen in fdisk should be as below. Device Boot Start End Blocks Id System ...
1
vote
0answers
69 views

Mounting GoFlex NAS in Ubuntu fails with Permission denied from fstab only

I can mount a NAS from Ubuntu from the command line with: sudo mount -t cifs //192.168.0.110/GoFlex\ Home\ Public /media/goflex -o user=,pass= However, when I add the following line to /etc/fstab: ...
0
votes
5answers
391 views

SSH with no password (passwordless) on Synology DSM 5 as other (non-root) user

I'm trying to ssh into my Synology disk station without a password (public key authentication), but as non-root. When I try to ssh as root without password, it works. Following the exact same steps ...
0
votes
0answers
18 views

How can I to update the kernel in my network NAS from Conceptronic: CH3SNAS (same as D-Link DNS-323)?

I have installed Fun_Plug (up to v0.7) and using it for years in my CH3SNAS, following instructions from Uli's web site, but even when the site has new kernel modules for download, I have not been ...
0
votes
1answer
45 views

remove all mac `._` files on Linux NAS?

I'm trying to remove all the hidden mac spam files off my old NAS box (qnap ts209). I tried following Remove all Mac generated files '._' with bash but the find command on my NAS does not ...
1
vote
0answers
107 views

NTFS drive recognized by Linux, not by Windows

I have a 2TB NTFS formatted USB drive attached to a Raspberry Pi which I use as a NAS. I can access the drive through the Linux terminal and see all the files, and I can also access all the files from ...
0
votes
1answer
980 views

How to install IPKG on Synology DiskStation

Is there anybody out there who got the 'ipkg' package manager running on a Synology DS412+ with DSM 4.3, or someone who knows how to do so? I've tried to install by GUI, used the package from ...
4
votes
3answers
311 views

SAN vs NAS: How to explain the difference in layman's term?

I am from a software background so I am not really up to date with these storage technology. I am asked this question today and I don't feel like I am able to give a correct answer. Here is my ...
2
votes
1answer
123 views

Case (in)sensitivity issues on a NAS connected to from both Linux and Windows machines

Scenario I have a NAS (Synology DS1813+ based on DSM 4.3). It runs a version of linux, so the file system is (supposedly) case sensitive. I access the NAS with 2 computers. One of them runs Windows 7 ...
1
vote
2answers
112 views

Who is the best user to be the owner of shared files?

I installed Debian on a home computer which will be used as a NAS. The server will share a folder with computers using Ubuntu or Windows 7 (I use a dual-boot). Should I chown all the shared folder and ...
0
votes
0answers
46 views

Increase Smb quota caused by small root partition

I am trying to increase available disk space on my Netgear Stora device (NAS). I log in as a root. Uname -a: Linux axentraserver.<mylogin>.mystora.com 2.6.22.18-Netgear #16 Sun Jun 13 19:54:46 ...
1
vote
1answer
1k views

Why is USB stick discouraged as boot medium for openmediavault

I have read at http://wiki.openmediavault.org/index.php?title=Installation that USB sticks are not recommended as boot devices. I thought that such a systems are optimized to limit system disk ...
0
votes
2answers
278 views

Modem/router seems to block access to NAS box with static IP?

I have an NSLU2 ("slug") network-attached storage box, running nslu2-linux, which was working well until I replaced some hardware in my home network. My current setup is very simple: I have a single ...
0
votes
1answer
197 views

Copying symbolic links and filenames with special characters to NAS

I have a new Western Digital My Book Live NAS. I am trying to copy files from an old drive to the NAS. I'm using Ubuntu 12.04 and I've mounted the drive by browsing the network in Nautilus and ...
1
vote
2answers
419 views

How to access my NAS via Samba without a username/password?

In Windows I can access my NAS via Windows Explorer with something like: //MyNAS/Path/To/Files This does not require a username or password. In fact, I've never configured my NAS to have a username ...
0
votes
0answers
213 views

How can I add a centralised CA SSL certificate repository to a QNAP NAS Linux build?

I would like to install a centralised CA SSL certificate repository to my QNAP NAS Linux build (TS-209II Pro, firmware version 3.3.2 build 0918T). Currently all HTTPS requests fail, as the CAs can ...
0
votes
1answer
242 views

FreeNAS/ZFS/Raid-Z slightly different disks

I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks ...
0
votes
0answers
118 views

Patching error on Synology Diskstation

I've applied the following patch to sw.c from rtl80211cu to add the IDs from TL-WN8200ND to the Synology Diskstation source and compiled the kernel module. After insmod rtlwifi, rtl8192c-common and ...
0
votes
1answer
113 views

Automatically create folder to mount remote folder

I'm using the CrashPlan client to backup my computer data to a local NAS. Unfortunately I can't directly put a remote folder in CrashPlan, I have to mount it in a local folder. But sometimes it can ...
-1
votes
4answers
329 views

how much does “chown -R” affects disk IO performance? how can I test it?

I'm running a Cent OS server with a NAS storage. I have heard "rm" command makes overall disk IO slow. So, I gave up doing rm -R. I will do rm one by one with a shell script. --EDIT--> rm and sleep ...
0
votes
0answers
85 views

How do I achieve software raid 4 array with different size disks with the largest disk being the parity?

For the last year I've been using a piece of software named unRAID built on top of slackware to host my NAS. I feel like I want to move on and evolve and build my own NAS setup on top of another ...
1
vote
2answers
185 views

Unable to install debian on Lacie ss4000e Kernel Panic

I am trying to load Debian Linux on my Lacie ss4000e I have been trying to follow this tutorial http://d-i.alioth.debian.org/manual/en.armel/ch05s01.html#boot-firmware-ss4000e I have tried to load it ...
3
votes
1answer
847 views

How do I remove a possible hard-link directory to root?

I know hard links to directories aren't supposed to be possible but it I have something odd on my NAS that looks very much like one. This folder originally came from a linux machine and appears to ...
0
votes
0answers
614 views

Backup data From Synology NAS to Windows using Synology TimeBackup

I want to backup my data From Synology NAS to Windows using Synology Time Backup, although it says Time Backup can only be used Synology NAS server as backup destination. But I tried some other way ...
0
votes
0answers
116 views

MySQL unstable switches between available and “Can't connect to local MySQL server through socket '/tmp/mysql.sock'” in matter of seconds

Using libmysql - 5.1.49 on a Synology NAS (v4.2) MySQL is very unstable, it switches from being available where I can login trough phpMyAdmin to unreachable where I get the error message "Can't ...
1
vote
1answer
423 views

Use Qemu & chroot to reset password on mounted external disk

I have a NAS based on Linux, but the root password is kept secret by the manufacturer. Now to reset the password I am trying to mount the disk to my local linux computer. All of the files are present ...
0
votes
1answer
202 views

Can't connect from outside of my LAN

I am running a Debian Squeeze linux server on my Dlink DNS-320 NAS. I signed up for a DNS service, so I could access it from anywhere. I installed lighttpd, and created a very simple page to test. To ...
4
votes
1answer
73 views

Virtual Filesystem that hides file location and moves items around

I have a media box and a NAS. At the moment I would like to have most of the videos that I would like to watch on the media box. [For performance reasons] All of the other videos I would like to ...
2
votes
1answer
83 views

In concept, are there any working setups for locally mounting several cloud services for free, encrypted storage?

The reason I started thinking about this was that I remember back when Gmail started offering several gigabytes of space, software came out that "mounted" your Gmail inbox as a drive in Windows (this ...
0
votes
1answer
54 views

How to set up a network share to be always accesible while roaming?

At home I have a Raspberry Pi which I use as a NAS and torrentbox. I would like to set up a network share on it that I can access from outside my LAN so that I can stream music and video when I'm at ...
1
vote
1answer
3k views

Install custom software on Iomega PX4-300D NAS (Debian OS)

I am trying to put additional software on my Networked Attached Storage (NAS) The NAS appears to be running Debian. Anyway, apt-get is already on the machine. I just needed to add the correct ...
-1
votes
1answer
102 views

Software RAID1 with two hard drives

I'm currently building an NAS. I have 2 3TB hard disks. Is it possible to software RAID these two if they hold the operating system? Or do I need a separate OS disk? If yes, could I just use an USB ...
0
votes
2answers
104 views

Linux machine to be converted to NAS [closed]

We have a (pretty old) Linux machine running crunchbang linux (64 bit). The machine was used for some time just as a storage space, files were managed mainly via SCP and SSH. But due to the increased ...
1
vote
1answer
365 views

Fixing broken SSH on NAS server

I am very new to the Unix/Linux world, and at my workplace, I was trying to set up my user to be able to SSH into the NAS server (our NAS is made by netgear). I had never worked with this particular ...
0
votes
1answer
308 views

Sabnzbd Installed on Linux NAS

I installed SABnzbd on a linux formatted NAS. Now the directory it downloads to is mapped differently on the NAS itself, because the path that SABnzbd knows about starts in it's own folder. If this ...
2
votes
2answers
2k views

Wget save cookies not working

I've been trying to login in the pyload through the web api, but wget is not saving the cookies and I don't understand why. I'm using the following command: wget --delete-after ...
0
votes
2answers
2k views

Can't mount filesystem on HD that came from WD NAS

I have a WD NAS drive, I need to recover some deleted files, so I've taken the drive out and plugged it into an Ubuntu machine to get direct access to the filesystem... When I check the drive in ...
0
votes
1answer
49 views

Western Digital NAS User File Locations

I took the hard drive out of a Wetern Digital NAS and plugged it into my linux machine and mounted it, but I can't figure out where the user files are stored. Any idea?
2
votes
2answers
3k views

How to change user ID on a QNAP NAS?

I've got a QNAP TS-110 which I access via NFS from my Ubuntu system. I guess that NFS on a typical home network does not use any user authentication. I've read in various places and I found that it ...
2
votes
2answers
3k views

QNAP NAS 509 (LINUX) - how to unmout busy volume and find physical disk?

On my NAS QNAP TS 509 I do have a technical issue. I need to run e2fsck. This works fine for me on md0 (see below), but how can I unmount the busy devices md9 and sda4 in order to do the same. ...
0
votes
2answers
841 views

How to delete files on a completely full NAS disk

A partition of my NAS is full: XX.XX.XX.XX:/nas-XXXX/backup 701G 701G 0 100% /home/nasBackup I can't delete a file. I get an error: disk quota exceeded I tried this: cp /dev/null ...
0
votes
2answers
6k views

What to do with Synology open source DSM 4.0 Tool Chains?

The synology NAS station's management software DSM 4.0 has an open source copy in source forge: http://sourceforge.net/projects/dsgpl/ I am thinking to setup my own NAS station with PC. How may I ...
0
votes
1answer
614 views

Setup HP MicroServer as Homeserver for NAS and other stuff

I've got a brand new HP Proliant Microserver N40L here, which I want to use mainly as a NAS system (because it has four hard drive bays) but since it also is a full-featured homeserver with enough RAM ...
3
votes
1answer
6k views

Recovering DATA from HDD pulled from failed NAS

I pulled out a HDD from the My Book Live (Western Digital) NAS because it doesn't connect anymore. Product info: http://www.wdc.com/en/products/products.aspx?id=280 I am trying to recover data from ...
1
vote
0answers
711 views

Build a Linux Firewall/Router/NAS/WAP [closed]

I want to build a linux based Firewall/Router/WAP from a PC that I have. Here is what I want. Act as a firewall where I can deny all incoming traffic except what I want Allow me to run servers with ...