0
votes
0answers
20 views

Linux MD software raid stripe cache size

From what I can piece together the /sys/block/md0/md/stripe_cache_size is for raid5 and 6 set at a very low default value to avoid starving machines for memory. By increasing this value you can get a ...
0
votes
0answers
25 views

mdraid 512/4096 sector confusion

I created a new mdraid array on 3TB disks, connected via USB (because the internal SATA ports were used for the old array). $ fdisk -l /dev/sdb Note: sector size is 4096 (not 512) Disk /dev/sdb: ...
0
votes
0answers
37 views

mdadm raid 6 stuck on rebuilding

I have a raid 6 running consisting of 9 1TB drives. Some time in the last couple of days, one of them became faulty and the raid startet rebuilding. But apparently it is stuck ... This is the raid: ...
3
votes
0answers
56 views

mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. ...
0
votes
0answers
78 views

mdadm partiton not large enough to join array

I've used Linux on and off for the last many years, mainly as dual boot or as Virtual Machines, but when I decided to build a Dev Laptop I though I'd bite the bullet and put Linux on as the base OS. ...
0
votes
0answers
97 views

Hybrid Raid-1 HDD + SSD — Write Intent Bitmap

I am currently running a laptop with 1 HDD and 1SSD. I currently am using mdadm to put some partitions in a raid 1 configuration with --perfer-write set on the HDD. I have this working correctly ...
0
votes
1answer
319 views

Understanding /proc/mdstat [U_] VS [_U]

My server is set up with raid1. A few nights ago sda fell out completely and data was corrupted. I replaced the drive, cloned the partition table and added the respective arrays. While adding sda3 ...
1
vote
0answers
26 views

Is there a safe way to move a partition beneath a linux software RAID5 using mdadm?

Suppose, for example, that you have a RAID5 across multiple disks and you would like to retire the oldest of the disks and replace it with something from this decade. I know I can fail the partition ...
1
vote
1answer
27 views

Is there a way to show RAID details in a similar way to MDADM?

I find mdadm --detail <device> very useful when I need to know what is going on with the device (/proc/mdadm too). Example: /dev/md0: Version : 1.2 Creation Time : Mon Mar 4 ...
0
votes
1answer
44 views

mdadm large memory consumption

Hi i'm build mdadm RAID 6 (8 WD Red 3 Tb) on ubuntu 13.10x64 server with ext4 fs When i download torrent on the array, server RAM is filled for maximum cap (8 Gb) memory is free when i manualy enter ...
0
votes
1answer
96 views

mdadm --assemble fails when /dev/sd[abcde]1 reordered

I am having trouble assembling a small RAID5 due to a recurring reordering of /dev/sd[a-f] on boot (Debian7). md0 was initially using sd[abc]1, it contains a LUKS device, which in turn contains a ...
0
votes
0answers
626 views

Converting LVM/EXT4 to ZFS without losing data

I have a home media server with 2 x 3TB drives in it. Its currently set up using mdraid (1), LVM and EXT4. The setup was done using the ncurses Ubuntu Server installer. Goal Convert the setup to use ...
1
vote
0answers
185 views

XFS: Mount overrides sunit and swidth options

I have a 9TB XFS partition consisting of four 3TB disks in a RAID-5 array with a chunk size of 256KB, using MDADM. When I created the partition, the optimal stripe unit and width values (64 and 192 ...
1
vote
0answers
160 views

mdadm: faulty Array, how to get recover as much as possible?

I have a RAID5 with 4 Disks in my PC. All of them were healthy (and the RAID itself) until before. I tried to install windows 8.1 which automatically creates this "SystemReserved"-Partition. The ...
1
vote
1answer
24 views

Non Raid - Symbolic links

I have 3x 3TB drives and 2x 1TB drives. I want to use all drives without RAID, but to be shown as a single volume. So that if a drive fails only the information on that failed drive will be lost. ...
0
votes
0answers
68 views

Raid drives missing filesystem

I recently had to do some troubleshooting with a RAID 5 on Ubuntu Server (a software raid). I ended up removing everything and start from scratch with 2 new drives. So I took out 2 out of 4 drives, ...
0
votes
1answer
54 views

How do I prevent anacron from running certain scripts?

I am running RHEL5 and software RAID (mdadm). Currently I allow the 99-raid-check weekly cron script to run at the normal time (early Sunday morning). However, if the system is off during that time it ...
1
vote
1answer
269 views

XFS in-memory corruption after hibernate

I am constantly getting the below errors with XFS filesystem present on software raid-1 which was then converted to 3-disk raid-5. Errors happen exclusively after hibernate, normally either ...
1
vote
1answer
448 views

Assembling an mdadm array with “possibly out of date” disks

I've recently moved house and have had some power problems after switching on my file server that's using a mdadm RAID5 set up. The file system I'm using is ext4. It seems that at some point two (of ...
1
vote
2answers
306 views

/dev partition missing, so mdadm broken. How to get Linux to see partition?

Upgraded a Linux box and changed out the root drives. There was a RAID-5 array of three SATA drives that I moved over (not root). Reinstalled the OS but was CentOS 6.4 before and after. # mdadm ...
1
vote
0answers
163 views

Create a mdadm raid mirror of an existing lvm

Hello I'm trying to figure out how I can create a pretty strange mdadm mirror of my lvm. I have 4 disks, (sda,b,c,d). Each disk has 2 partitions: 1Gb - physical volume 500mb - Swap My system lvm ...
5
votes
1answer
118 views

Is it safe to “use” to disk if extended smart check is in progress?

As simple as the title suggests. /dev/sda is a unit from /dev/md127 - RAID1 drive. I'm currently running a test - started a smartctl -t long /dev/sda. Afterwards, I started to copy files over ...
1
vote
0answers
39 views

erased md0, md1 and can't recreate them

I previously had a working RAID 1 array. I think as a result of running grub-install /dev/sdb and grub-install /dev/sdc I somehow wiped my computer of md0 and md1. I need to set them up again. When ...
3
votes
1answer
624 views

mdmda raid 1 - spare drive after SATA cable change

Yesterday my hoster changed a SATA cable of one of my hdds, when my server came back up again cat /proc/mdstat showed this Personalities : [raid1] md124 : active raid1 sda1[0] 4193268 blocks ...
1
vote
1answer
212 views

Documentation for mdadm bad block support

I've read a bit about that mdadm (and the kernel) now have bad block support but I am having a hard time finding any useful documentation on this subject. Is the bad block list for disk X duplicated ...
0
votes
2answers
68 views

Writing to a specific drive with software RAID4 on Linux

Edited to reflect conclusions from comments: I want to construct a software RAID-like array with 2 storage devices plus one parity device, where the parity device maintains the XOR of the two other ...
1
vote
0answers
93 views

How to add extra sata drives to desktop server

I have an ubuntu 12.04 machine with a raid using mdadm. The motherboard has 8 sata ports which are all being used, and I would like to add more hard drives to it. What's the easiest/best way to add a ...
1
vote
2answers
5k views

How to remove Linux software RAID MD device?

I'm trying to install openSUSE 12.3 on the new server. It is this machine. There are 2 HDDs connected to the SAS controller. What I want to achieve is a NON-RAID configuration where 1.HDD is used for ...
1
vote
0answers
235 views

blkid not returning the correct UUID/label for drive

I have 7 drives in my server (running Debian Wheezy as dom0 for a Xen hypervisor): An 80GB system drive, 3 x 2TB drives, a 1TB drive and 2x 500GB drives. The 2TB drives are all part of an mdadm RAID ...
0
votes
1answer
1k views

mdadm disk partition type : Linux RAID Autodetect mandatory or 83 Linux ok?

Main question : Q1: i would like to know when using mdadm, the "Linux RAID Autodetect" type is mandatory for my disk, or a "83 linux" type is ok ? Sub question : Q1_1 : What are the differences ? ...
3
votes
1answer
1k views

Need to find which drives are mirrored within RAID-10 array

I have a home media server running on openSUSE 12.2. I'm using eight 2TB drives in a RAID-10 configuration. I deliberately bought two different types of drives: four Seagate Barracuda Green and four ...
1
vote
0answers
244 views

Broken mdadm RAID after hard drive firmware update

I updated the firmware on the two hard drives in my raid array, and now the raid array does not seem to work. I'm running Kubuntu 12.10. Here is the output of some things I tried: sudo mdadm ...
2
votes
1answer
622 views

Mounting a raid1 device - no suitable drives found

I'm having some problems with my disks; long story.. but right now I'm trying to mount a device that was part of a 2-disk raid1. For that, I tried to assemble it into a new array, but... % mdadm -Av ...
0
votes
2answers
818 views

In mdadm's /proc/mdstat, what does [U_U] mean?

I just set up a raid 5 array for my media server. I set got 2 new disks, and set up an array with one missing drive, to copy the data from the old single drive to the new array, and later I will add ...
2
votes
0answers
403 views

Cloning Ubuntu mdadm RAID1

I would like to clone a pair of RAID1 drives created with mdadm. I've tried Clonezilla, but there's no native support for mdadm, so it resorts to using dd which is incredibly slow. I've looked for ...
1
vote
1answer
370 views

Linux raid10 on btrfs

I've read that BTRFS requires at least 4 disks (https://btrfs.wiki.kernel.org/index.php/Using_Btrfs_with_Multiple_Devices). Indeed, Linux mdadm raid10 requires only 2 disks ...
1
vote
1answer
194 views

how to boot without assemblying raid arrays (or assembling them correctly)

I had one debian 6 system with two harddisks on raid1 set up via mdadm. built on simple partitions (/dev/sdb3, /dev/sdc3). at least on the old system, everything is tied up via UUIDs. then i inserted ...
1
vote
0answers
54 views

Software RAID 1 resync's on SATA cable switch?

I made a mistake when I opened up my desktop removed a 2 disk RAID 1 and reconnected them, but with the SATA cables switched, such that sda became sdb and viceversa. On boot, the RAID array started ...
0
votes
0answers
219 views

Post raid5 setup reboot shows single hard drive failure on ubuntu 12.10?

I just set up raid 5 on linux using three HDDs as per a guide. It all went fine until when I rebooted I got the following text: http://i.stack.imgur.com/Zsfjk.jpg. Does this mean one of my HDDs has ...
0
votes
1answer
547 views

Linux system cannot find RAID 10 md device after reboot of the system

I ran these commands: $ sudo mdadm --verbose --create /dev/md0 --level=10 --chunk=256 --raid-devices=4 /dev/sdh1 /dev/sdh2 /dev/sdh3 /dev/sdh4 $ echo 'DEVICE /dev/sdh1 /dev/sdh2 /dev/sdh3 /dev/sdh4' ...
0
votes
1answer
99 views

How to create physical and logical volumes on system reboot

My system is set up so that I take four devices, create a RAID 10 array out of them, create a physical volume, a volume group, and then three logical volumes, and lastly I create filesystems out of ...
3
votes
0answers
1k views

Does TRIM avoid the performance impact of mdadm RAID 1 on SSD?

It has already been mentioned in other questions that Red Hat recommends against using mdadm RAID 1 on SSD. Red Hat also warns that software RAID levels 1, 4, 5, and 6 are not recommended for use ...
0
votes
0answers
48 views

Do a Re-Build During a Re-Shape?

On my Linux software RAID 6 array, I'm currently mid-reshape and 2 drives have been marked as failed. I've swapped them out and added new ones to the array, which are currently marked as spares. The ...
0
votes
1answer
80 views

Linux RAID Re-Shape Stopped

For the past 8 hours my mdadm re-shape process has been stuck. The output is: Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdo[11] ...
0
votes
1answer
142 views

Disable writing RAID degraded mode

I have a RAID5 with 5 disks on my machine and suspect the motherboard chipset to fail at some points and make my raid going in degraded mode. Last time it happened I noticed it on the failure of the ...
1
vote
0answers
248 views

At what point does RAID 0 stop being fast and just become dangerous? [closed]

I have an interesting RAID setup across 2 harddrives on my home computer. I have /tmp and a mount point(/home/machines) for virtual machines (along with a few other mount points). These partitions I ...
3
votes
2answers
128 views

Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity ...
1
vote
2answers
337 views

Migrate mdadm raid array from 32bit to 64bit debian squeeze

I have a raid5 array running on Debian Squeeze 32bit (x86) and I plan to upgrade to Debian Squeeze 64bit (amd64). To keep my raid5 array and ext4 filesystem I simply keep a copy of my mdadm.conf ...
0
votes
1answer
974 views

How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo ...
6
votes
2answers
3k views

mdadm RAID Fast Setup with Empty Drives?

I am recreating some RAID5 disks as RAID6 with mdadm. There is no data on the drives that I care about. Setting up RAID takes a while to setup the shape - I accept that when there there is data that ...