Questions tagged [modem]
A device for sending a digital signal down an analog line
991
questions
0
votes
2
answers
2k
views
Why do we use Modem and Router together or Router and Switch together?
I know that modem provides internet access owing to modulation-demodulation. Router provides connection between networks as a gateway.(e.g. between LAN and ISP) Switch provides a local area network(...
1
vote
2
answers
926
views
Connecting to PCIe 3G modem as Serial device through COM port in Windows 8.1 on Dell E7440
I have Windows 8.1 with a Dell 3g card 5570, which is actually a Sierra Wireless MC8805 HSPA+ mini PCIe modem. It works great in windows.
Now I need to be able to access it as a serial device through ...
0
votes
0
answers
852
views
Using adsl router as modem only?
I have 2 network points(in two different location) that are RJ11 type and I need to use them and connect them to a switch(RJ45 of course) and make networking,
and the switch is near to one of the ...
0
votes
1
answer
39
views
Two modems two seperate lines to equal one speed [duplicate]
I have two modems and two different phone/ internet lines coming into my home. Each line has 6mbps. Can I connect these two modems into one PC to combine the speed to 12 Mbps? Or is there a way to ...
0
votes
1
answer
5k
views
Can I use a DSL Modem with built-in wireless router with a cable modem? [duplicate]
I recently moved from DSL to Cable. I have a 'dumb' cable modem, but a 'smart' DSL modem (two actually). What I would like to do is to connect the cable modem to one of the lan ports of the DSL modem (...
0
votes
1
answer
207
views
Router speed not even close
My laptop which has an Intel Centrino Advanced-N 6235 downloads at about 27Mbps. My router is a Belkin N150 (Model F9K1001v3). And I have a Motorola Surfboard SB6141, which supports up to 300Mbps. ...
2
votes
1
answer
1k
views
How to connect my modem router to multiple cat 5 sockets
I have just moved my business to a small office, which has 10 cat 5 sockets. The modem/router is connected to one socket. How do I connect the other sockets to the one that has the modem/ router ...
6
votes
2
answers
10k
views
Is a DSL splitter required, if only a Modem is attached to the line?
Annex B is the current standard for digital subscriber line (DSL) in Germany. A DSL-splitter is an analog L-C-filter to separate the POTS (plain old telephone service, like voice and ISDN, FAX) ...
0
votes
1
answer
4k
views
Routers with multiple user increasing latency by request is normal?
I guess my modem have a problem with multiples users sending packages simultaneously, in the past I shared my internet connection with others 4 devices (computers and smartphones) and I played online ...
0
votes
2
answers
3k
views
pppd started by wvdial does nothing
I'm trying to get GPRS modem working under Linux.
For some of the ISPs it worked fine, but for one of them the process stucks right after starting the pppd.
The log looks like this:
--> WvDial: ...
2
votes
1
answer
738
views
Can I connect two computers on an ADSL modem which has one USB port and one Ethernet port?
I have an ADSL2 modem + router. It has one USB connector and one Ethernet port. It is not a wireless router-modem.
Can I use both of my computers on each one to access the internet?
Here are the ...
2
votes
2
answers
55k
views
Configuring QoS For Huawei Modems
I've researched this subject but found absolutely 0 result for my router. I want to configure my router's QoS settings and give my all bandwidth to uTorrent application, so (I hope) I can download my ...
0
votes
1
answer
3k
views
Modem not able to easily establish broadband connection. Takes several restarts
I had asked similar question here. But instead of reviving it, I thought I would post a new question with additional details. The issue is establishing broadband connection initially. I have a DSL ...
0
votes
2
answers
3k
views
Why does a router need to know the modem's static IP address?
Background: I just ordered a static IP address from my ISP. I now have to configure my router to use the static IP, but I'm not sure why.
Why does the router need to know the public IP address if it ...
0
votes
0
answers
86
views
Is it possible to manipulate my WCDMA modem's code?
I have a WCDMA data card (WCDMA modem) that is used for Internet connectivity. Unfortunately it has been designed so proprietary that I cannot connect to any WCDMA other than the one who branded my ...
2
votes
1
answer
582
views
If my DSL modem leaves a port open, how vulnerable is my router?
Port scans of my old Netgear router showed that port 4567 was open. I assumed my router was to blame. Now port scans of my new Linksys router show the same open port, which makes me think my DSL modem ...
0
votes
1
answer
843
views
How to access ADSL modem web-interface thru router?
I have 3 devices in my network:
D-Link router (fixed IP 192.168.0.1, DHCP enabled)
ADSL modem (fixed IP 192.168.0.2, DHCP disabled; bridging mode, PPPoE)
PC (dynamic IP)
If I connect the modem to ...
0
votes
2
answers
21k
views
Default gateway is 192.168.1.1 but can't access it with browser [duplicate]
I have a Zyxel P-870H VDSL modem, I"M trying to diagnose internet problems.
I have my computer computer plugged into it via ethernet. I'm able to access the internet, and ipconfig tells me that the ...
0
votes
3
answers
561
views
What is meant by MAC address "Spoofing"
Why is MAC address Spoofing called spoofing, rather than MAC address changing? If the network sees your MAC address as whatever you spoofed it to, doesn't that practically meant you have completely ...
0
votes
1
answer
2k
views
192.168.1.1 randomly switching between accessing VDSL modem, and accessing the wireless router.
I'm having trouble with my home network, since I've started using a new wireless router.
The setup is a Zyxel VDSL Modem pluged into the wall, and connected to a TP-LINK modem via the ethernet ports. ...
0
votes
1
answer
942
views
Need modem for a line-bonded ADSL2+ connection
I have two semi-related questions:
What do I look for in specs to identify ADSL2+ modems capable of supporting line-bonding? I can't seem to locate any clear indication of those which do versus those ...
0
votes
1
answer
13k
views
how to turn my D-Link modem into a bridge/repeater for my USB 3G dongle? [duplicate]
I have a usb 3g dongle and a D-Link modem.
I like to know how to convert my d-link wifi modem as wifi transmitter for the data from usb dongle.
i.e. Internet connection source as my USB dongle amd ...
0
votes
1
answer
2k
views
Extremely slow download speed, could my modem be causing it?
First off all I want to thank everyone who is reading this.
This will be a long problem so I really hope someone has an answer, as my ISP doesn't.
For over a month we have been experiencing ...
1
vote
2
answers
2k
views
Are two 8dbi antennas equal to a 16dbi antenna gain? How much coverage will I get?
I'm planning to buy a TP-LINK TD-W8961ND modem+router and two 8dBi TP-Link TL-ANT2408CL antennas. I'm going to attach the two 8dBi antennas into the modem, because this modem has two external ...
4
votes
4
answers
225k
views
D-link blinking orange light and cannot access router IP
I've never had this issue before, but just recently I had to get a new Ethernet cable, because my old one had broken. So I bought a new one, and now when I connect my modem and router to gain Wi-Fi, ...
0
votes
0
answers
76
views
Strange Issue with computer shutdown and cable outage
This problem first showed signs a few days ago. I was working on my iMac, and suddenly it shut off immediately without showing any warning signs. So, I powered it back on and my ethernet connection ...
0
votes
1
answer
9k
views
Why PPPoE Connection fails with error 691 - ADSL2+ Modem
On Windows 7, an ADSL2+ modem is used to connect to my ISP using a PPPoE connection.
1-Username and password are correct.
2-The modem is configured to accept bridge connection with my ISP VPI VCI ...
0
votes
1
answer
564
views
Trying to access a internal modem over serial with putty. Only typing letters a and A work
I try to connect to an internal broadband modem over the serial (com port) with putty.
It is Windows 7 64 with 64 bit drivers for the modem. When I connect with putty to the port the only letters I ...
1
vote
0
answers
538
views
Why would wifi router suddenly start having a bad connection for only one of the connected devices?
My home connection consists of two OSX Mavericks laptops connected to a Motorola box that functions both as a wifi router and a cable modem.
About a month ago, we started seeing problems. The ...
0
votes
1
answer
345
views
Modem Speed Limit
I changed my plan to a 4Mbps unlimited connection. But my download speed still shows 573Kbps in the ADSL settings webpage and I get slow download speed. I called the ISP's customer care and they said ...
-1
votes
1
answer
2k
views
Want to use my ADSL modem as WiFi router when I use internet through other USB modem
I have a DSL DG-BG4100N modem. I use internet through other USB CDMA modem. Now I want to access this connection on my laptop through WiFi without disconnecting it from my desktop.
How can I use the ...
2
votes
1
answer
2k
views
MAC filtering not working on 2wire 2701HG-T modem
Why would mac filtering not work on a 2wire 2701HG-T modem? I've relied on mac filtering before to block intruders with other modems, but at my mom's house, she has a 2wire 2701HG-T modem, and there ...
1
vote
2
answers
2k
views
How can USB 3G modems reach high speeds through a virtual serial port?
I'm a bit puzzled about the virtual COM ports used by modern high speeds USB devices that creates several serial interfaces, one of which is used for data transfer.
A modern 3G/4G USB modem can reach ...
1
vote
1
answer
4k
views
Connect a modem to a router through a patch panel?
I currently have my router next to my modem which is in the far corner of my basement. I would like to buy a 16 port patch panel and 16 port switch to organize and manage my 9 runs. My questionis ...
0
votes
2
answers
131
views
Using the Windows 7's fax service
I use Windows 7 ultimate on my computer. And know that it's possible to use this OS as fax device to send and recieve faxes. I have an ADSL modem which the telephone line is attached to it and a ...
0
votes
1
answer
575
views
Why does my modem takes many attempts to connect to internet
I have this old DSL 502T Dlink modem router(wired). I have been using this for many years without any issues.
Recently though, there is issue connecting to the Internet (WAN side). It takes many ...
-1
votes
1
answer
1k
views
installing fax modem drivers on linux
EDIT 2:
My modem is of type "HSFModem" so I got to the http://www.linuxant.com/drivers/hsf/oem/downloads.php and there I downloaded the debian file. I extracted it, and executed the command dpkg -i ...
0
votes
0
answers
429
views
Browser says, it can't find the web page
If I google something and open all 10 results in new tab, 1 or 2 tabs didn't get loaded and the browser says it can't find the webpage but when i refresh, it loads perfectly.
I feel that whenever ...
0
votes
0
answers
258
views
Unable to Dial modem using LAN cable
I have a modem router , D-Link DSL-2520U, which has an ADSL cable. The modem router is connected to a Wireless Router TP-LINK TL-WR740N using a LAN cable. My devices connect wirelessly to the TP-LINK.
...
0
votes
0
answers
469
views
Desktop keeps dropping off internet, modem working, wireless devices working
Super strange for the last 3 weeks, I go to use my desktop and I can't get on the internet. I get message in my browser that it can't get the page. Yet I look at my modem lights and the internet light ...
0
votes
1
answer
219
views
Can I use an integrated modem with wireless router just as a modem with a cable service?
I live in Seattle, and my mom lives in San Francisco. She recently called me stressed out about how "the box with lights" doesn't work anymore. After calming her down, I found that she recently ...
0
votes
1
answer
1k
views
1 modem 2 routers with independant networks
Ok I have 2 routers and one modem. (I also have a switch handy) I would like to connect both routers to the modem. The only catch is I don't want both networks down if one router stops working or is ...
0
votes
1
answer
2k
views
Two routers connected to one DSL modem
Let's say that currently I have a VDSL modem connected to the phone wall-socket: it takes the VDSL line/signal.
Then I've a router, connected from the WAN port, through ethernet, to the modem. The ...
0
votes
0
answers
300
views
How to absolutely minimize Windows 8 data usage (for satellite phone)
What steps can I take to absolutely minimize Windows 8.1 data usage when connecting to a satellite phone? Which is $$$ per MB.
For instance
Disable browser auto update
Disable windows update
Make ...
0
votes
1
answer
2k
views
Repurpose a cable modem/router as merely a router
Please bear with me - I'm unclear about much of the terminology used in home networking.
The scenario:
I would like to set up a wireless network.
I live in a shared house where internet service is ...
1
vote
0
answers
1k
views
How to access modem's web gui from inside LAN?
When my Netgear CG3000 is in bridge mode it acts as a modem-only, but it still exposes valuable information about the Internet connection through its web gui.
However I cannot seem to access the ...
0
votes
3
answers
41k
views
Who are currently connected to my DSL-Modem?
In my home there are some devices that connected to my DSL-Modem at the same time. (such as PC - Laptop - SmartPhones etc...)
I would like to know who are currently connected to my DSL-Modem ?
I ...
0
votes
1
answer
412
views
Amazonaws blocked by modem?
since some time i have the following problem:
I can't download a .exe file (in my case the "Minecraft.exe" file) from s3.amazonaws.
It does not work on 2 laptops, which are connected with a Vodafone ...
3
votes
1
answer
30k
views
What happens when I plug a router into another router?
I've recently switched ISPs, and the new one provided me with a modem (that what you call those things?) that doubles as a router.
I used a router on my previous ISP for wireless networking, but I've ...
3
votes
5
answers
1k
views
How to include a short digital message in a sound recording
I wish to superimpose a short digital message, less than a kB, at an above audible frequency, but still low enough to be transmitted over FM radio stations, and then detect and decode that signal.
...