A device for sending a digital signal down an analog line

learn more… | top users | synonyms

0
votes
0answers
62 views

USB Pocket router installation in windows XP (sp2)

Recently I bought a ZTE wifi pocket router. It's model no. is ZTE MF70M. It is supposed to work as a 3G modem also. My desktop pc is running on Windows XP (SP2). Now, the problem is I can not install ...
1
vote
2answers
653 views

How to use Dial up modem for VOIP to PSTN calls?

I am new to asterisk freePBX and I want to establish calls between softphone to normal PSTN connections. So I am wondering is this possible or not? can this dial up modem will do it? It has two FXS ...
0
votes
1answer
636 views

Internet noticeably slower on one computer while faster on another connected to the same router

I have a 120Mb/s Internet connection and it works well on my laptop with 1Gb/s network card and Windows 7. But it works too slow on another computer which is older and which have 100Mb/s network card ...
1
vote
0answers
278 views

Locked DNS settings on Netgear CG3700

I’m trying to use a specific DNS server with the Netgear CG3700EMR-1CMNDS modem/router. I was able to do so using this exact same hardware a few months ago, so it is possible that an update may have ...
0
votes
2answers
5k views

Internet access directly through modem, but not through router [duplicate]

I’m trying to set up a new network at my home and am having issues... in short, I can access the internet through my modem directly, but not through the router. Here is a brief writeup for today's 4 ...
1
vote
0answers
32 views

Use modem for dialing, without a computer [closed]

I have an application that requires to enable and disable call forwarding on a landline on demand. Ideally on a network request or at least on a specific schedule. Since I am required to do it with ...
0
votes
1answer
195 views

Will a Modem -> Switch -> Access Point setup work?

So, I'm planning on chucking out my ISP's router because it's just plain not good enough. I'm planning on moving to a Modem -> Switch -> Access Point setup. I plan to have a DrayTek Vigor 130 ...
0
votes
0answers
45 views

Dlink 2730u Router is accessible from internet

I ran avast and found that my router is accessible from internet. I am unable to find the section where I have to disable remote access/connection(Router-Dlink 2730u). Please someone guide me on this. ...
0
votes
3answers
297 views

Replacing Comcast modem/router with my own for internet and phone

I use Comcast for my wireless internet and land-line phone at home. I'm interested in buying my own router instead of using the one Comcast is "letting" me use for "only" $10/month. I've looked ...
0
votes
0answers
73 views

Multi-WAN ADSL2 or VDSL modem/routers?

I'm not asking fort product recommendations, just out of curiosity - because all I can seem to find are multi-WAN that have one of each ADSL/VDSL/Ethernet/USB - are there such devices that have multi-...
0
votes
2answers
318 views

My Huawei B890 router is not accessible over the internet

It may be a beginner question but I called my service provider and the manufacturer and they have no answer for me. I want to have a remote access to my Huawei B890. On the management panel, I ...
0
votes
0answers
89 views

How to send feature codes with a modem using AT commands

I have a ZTE usb modem that I need to use to send a feature code *140*707# to my network provider. How can I do this with console apps like screen and AT commands? I've found a page that explains how ...
1
vote
0answers
251 views

Netgear DGN2200v4 serving my modem's DHCP, cannot access web interface

Specs http://support.netgear.com/product/DGN2200v4 Netgear N300 Wireless ADSL2+ Modem Router with Ethernet WAN DGN2200v4 Ports: ADSL WAN/4 3 2 1 USB Power Question When connecting ...
0
votes
0answers
37 views

Why does my ADSL modem occasionally go “blind” with specific websites?

I have noticed for a long time that my ADSL modem occasionally "forgets" certain websites, such as my own. It will then, as with a DNS error, display a simple: "Server not found" message. This ...
12
votes
5answers
2k views

What is the cable that runs from the cable modem to a wall outlet

I was wondering what type of cable runs from the modem to the wall outlet in my house? Is it a coaxial cable? I'm very confused by what I've read around the internet. There seem to be many variations. ...
0
votes
0answers
162 views

How to get rid of Untrusted Connection error after installing new router and modem?

I installed a new router and modem. Everything seemed to go fine except now I cannot load a webpage without getting a "This Connection is Untrusted" error. More specifically when I try to google on ...
0
votes
1answer
88 views

Can I connect a CM820 modem to a switch to get more ports?

I have an Arris Touchstone CM820 cable modem (DOCSIS), but it has only one RJ45 socket. Can I connect a switch to it (like TL-SF1005D for example) in order to have more internet ports?
0
votes
0answers
129 views

Bridge mode cg3000v2 AirPort Extreme security settings

I have a cg3000v2 keeps getting hacked so I brought an AirPort Extreme. It's supposed to prevent the hacking. I heard that I have to put the netgear Cg3000v2 in bride mode for the airport ex to work. ...
0
votes
1answer
130 views

Connecting 2 ADSL2 Modem Router in one splitter

I am having a new ADSL2+ Modem Router. I brought it few days back when my old one got complaint. It's working well but it doesn't have good connectivity in specific places. Today I received my old ...
0
votes
1answer
251 views

How can I get rid of the double NAT in this network?

Topology: Incoming Traffic > Modem > Router > Switch > Rest of Network In this image, notice IEAS-FILESVR, incoming traffic goes to the modem/router "IEASOFFICE" into the switch, to the FILESVR ...
1
vote
0answers
171 views

Modem not passing internet connection to wifi Router

I have a BSNL Wimax internet(India) connection. I get input from a terrace antenna to a modem(OX253P). An ethernet cable is then connected between the modem and the laptop. My internet works perfectly ...
3
votes
0answers
49 views

Sending files with continous hex pattern via FTP causes corruption

I'm experiencing very difficult to diagnose problem, which causes file corruption on files I'm uploading. Corruption happens to many files which contain continuous hexagonal pattern (like thousands ...
0
votes
0answers
83 views

Problems using Raspberry Pi to connect to VisionTek external modem

I am using Raspberry Pi to connect to a VisionTek external modem, using WvDial as an application program to dial. I am able to run "AT" commands through another application program, but if I try to ...
-1
votes
1answer
2k views

How to find out who is DDoSing you

So I (had) a friend who now hates me and he said he would take me offline if I blocked him on Skype. I did not believe him and I said "I don't care, do your worst". Big mistake - he found out my IP ...
-1
votes
1answer
73 views

What is the name of a some hardware-device feature which displays user's internet connections?

Problem: I'm trying to find a small hardware device (eg. a modem/router? firewall?) that can tell me who (private LAN IP addresses) is connecting to what other (public) IP's and their up/down speeds**...
0
votes
1answer
177 views

Upgrading TWC modem/router with 192.168.0.1 default address on home network with existing Trendnet wired router set to 192.168.2.1

I have a home network with a Trendnet TW100-S4W1CA wired router with a base address of 192.168.2.1, DHCP turned on with a range of 192.168.2.1 - 192.168.2.100, subnet 255.255.255.0. It is connected to ...
1
vote
2answers
354 views

How to find IP address of ADSL modem?

Our fall back Internet connection uses a SpeedStream 4100 modem, which just broke, so I have replaced it with a new one. I need to configure it to bridge mode, but I can't even find its IP address. ...
0
votes
1answer
49 views

1 modem connect with 2 device, can it in the same network?

My ISP provide me a moderm that has 4 input and I can plug lan cable in it the modem model: http://huawei.com/en/products/fixed-access/fttx/ont/hg863/index.htm So I have attempt like this before --&...
0
votes
0answers
718 views

Motorola SBG6580 cable modem into Bridge mode on Bright House Networks does not work

I tried placing a Motorola SBG6580 into bridge mode but when I connected via Ethernet to it, I was not able to access the internet or get an IP, I had to statically assign myself a 192.168.100.x IP to ...
1
vote
1answer
60 views

Can I use a wireless modem instead of wireless adaptor [closed]

I have 2 wireless modems at the moment. One is connected to my ADSL provider and all the wi-fi devices are connect to it currently. Second one is sitting idle at the moment. I also have a PC that ...
1
vote
0answers
48 views

Connecting two routers with device accessibility behind home cable modem

I have three routers; [the wireless modem gateway, a Linksys device which is in only switch mode and another Linksys router which is in bridge mode] I have this setup: [cable modem] -> switch -&...
1
vote
0answers
89 views

How to pass modem WAN port to a soft router by a switch with VLAN?

Moved from Networking Engineering. I had a fiber modem (100M) connected to my main router through one CAT5 cable in my local LAN. Now I just built a HP Gen8 microserver, and I plan to create a ...
1
vote
1answer
28 views

Does switch interract with port Forwading and DHCP?

Using currently a "BT Home Hub 5" for my network. BT Hub 5 > Devices I would like to change my network to Modem > Switch > Devices What would be the impact regarding DHCP and Port ...
1
vote
1answer
257 views

Does AT&T U-Verse phone service cause problems with modems?

I have landline phone service with ATT Uverse. My router is a 2wire, and when I go to the router homepage, I see something that says the VoIp service is either idle or active. I also have a modem in ...
2
votes
1answer
59 views

Why do I have to reboot my modem to connect a new router?

Sometimes, not all the time, when I change my router, I have to reboot the modem before the router can detect the WAN connection. This does not make sense to me. Why does it seem like the modem is ...
4
votes
3answers
5k views

Wifi stops working every 10 minutes on Mac OS X Yosemite [SOLVED]

Every 10-15 minutes, my internet connection fails in the following manner: Cannot load websites Cannot connect to Dropbox Cannot connect to IRC Skype still works Slack still works Still able to ...
-1
votes
1answer
34 views

Modem Connector stuck inside adapter

I bought this power adapter and it comes with some ports. I followed the instructions on the sheet but it wouldn't work. So I tried to unplug it, but the connector inside is too deep. Any help to ...
0
votes
0answers
80 views

How does a TAPI Modem work?

I am primarily a software developer, but a client has asked for some CRM software that can pull up the customers information via their phone number coming through the landline. After doing some ...
1
vote
1answer
276 views

connect wireless router to 4g modem /router

I spent the whole day configuring the routers but no luck, my case as follow: I access internet through 4g huawi modem /router I want to connect wireless tp-link which connects two printers, I want to ...
2
votes
1answer
139 views

Home Fibernetwork setup vs Traceroute results - where is my WAN IP located?

On my learning with using traceroute, I have actually put it to practical use with my current home network setup trying to figure out what are the available hops and IPs assignment but have ...
0
votes
0answers
261 views

How to bridge Wi-Fi Reciver and ADSL Modem so that I even can share the net connection with the WiFI device and second router?

I have an ADSL modem which has an active internet connection. Then I have Wi-Fi Receiver/Emitter and another ADSL Modem. A: 1st ADSL Modem with active internet connection B: Wifi Modem[Receiving ...
0
votes
1answer
56 views

Data from two modems for faster browsing? [duplicate]

I'm stuck with DSL Lite (a slow Internet connection). Is it possible to speed up my AT&T 'DSL Lite' connection by augmenting it with some bandwidth from my Cellphone's tethered 'hot-spot' ...
1
vote
2answers
3k views

What does WAN connection type PPPoE mean when it detects Static IP

On my router config page, under Network> WAN> WAN Connection Type: PPPoE is present by default. There is a detect option next to it which provides Static IP as the result. http://i.stack.imgur....
2
votes
2answers
6k views

Portforwarding is not working in E5172 Huawei 4G Router

I have been trying to do port-forwarding on my router (Huawei E5172 4G Router). I've done this before and it worked but i can't get it to work on this router, and i have no idea why! This is a ...
0
votes
2answers
356 views

What is the difference between an ADSL operating in modem mode versus bridge mode?

What is the difference between an ADSL operating in modem mode versus bridge mode? The scenario is that we have a router supporting ADSL, and a second router with more advanced options. Two routers ...
1
vote
1answer
148 views

Connecting my new SB6121 modem to my Linksys E1200 router

Yesterday, I purchased a new SB6121 modem to replace the one I was renting from Comcast. I called Comcast to activate the new modem and the Internet works but not wirelessly. I've tried connecting ...
0
votes
1answer
142 views

Combining 3 AT&T U-verse modems to form 1 Aggregate Connection? [duplicate]

I need a faster internet connection. I am thinking about getting 3 AT&T U-verse modems, each providing me 18x1mbps. Is there an effective way to combine all 3 modems to form 1 aggregated ...
1
vote
2answers
65 views

How to determine the DSL-speed of a wireless modem?

This seems like it should be simple. However, modem-routers don't always have their modem speeds mentioned in their specifications. For example - this TP-LINK router on Amazon. It's specifications' ...
1
vote
1answer
144 views

Why did front usb port not connecting to internet

My D-Link usb modem is not connecting to internet with front usb port. But it is working with the ports from rear side of the pc. And this front usb ports are perfect with pendrives and usb mouse. I ...
1
vote
0answers
193 views

Does the Conexant CX06836 modem chipset support caller Id?

I have a USB modem based on the Conexant CX06836.11 chipset. I would like to use its caller Id function (if it is available). Does anybody know with certainty if this chipset supports the caller id ...