-3
votes
2answers
35 views

Switching to IPv6 - Do I need a router?

In the future, since every IP (IPv6 adress) is going to be global, we don't need to use NAT. So basically, why do I need a router on an IPv6-only global network? Why not just replace my router with a ...
1
vote
1answer
14 views

How to forward a port in VM which is behind NAT

I see a few questions similar to my but, they didn't answer my question. I have a router. I have installed Debian in VM and setup a ssh server on it. I want to forward a port for this machine on my ...
1
vote
1answer
32 views

SSH and PWNAT for SSH Connection Between Two Separate NATs

Is it possible to use pwnat and SSH to establish a "peer-to-peer" SSH connection between two machines that are behind two separate firewalls/NATs? If this is possible, what are the steps that would ...
0
votes
0answers
12 views

ShrewSoft VPN, multiple users with same external gateway issues

I have a VPN firewall, we can connect more than one user if using different external gateways. If we have more than one user with the same external gateway then only one can connect and keep pinging ...
0
votes
1answer
14 views

Windows wireless bridge with NAT

Here is my setup: I have a robot that I want to access remotely, but there is no wired connection. If the robot was configured to DHCP, I think could bridge the wired and wireless connections on a ...
0
votes
1answer
18 views

Double NAT with access to both gateway web interfaces

I have a Cisco Linksys E3000 home router that I appreciate. However, my new (but temporary) ISP will want me to use their Huawei router for their service once I get connected next week. This creates ...
0
votes
1answer
36 views

Why from a virtualized Ubuntu system I can't discover the ip address of my router?

I am not into computer network and I have the following problem finding my router IP address. I have a Windows 8 PC on on which it is installed VmWare Workstation that virtualizes Linux Ubuntu. The ...
1
vote
1answer
36 views

How can I specify which network to use for internet connection and which for viewing network computers

I have two Network Adapters on Windows 7 64 bit operating system which is installed on Oracle Virtual Box. I created those two adapters as follows: NAT VirtualBox Host-Only Ethernet Adapter If I ...
0
votes
1answer
56 views

How can I bypass my modem with NAT to open my ports to the outside?

My Internet provider gave me a Modem-Router with WiFi capabilities but it has all ports filtered for incoming traffic. What I'm trying to do is to use NAT in someway that allows me to recieve incoming ...
0
votes
1answer
32 views

Connect to internet through two gateways

I am developing a library to perform port forwarding in NAT devices. Using SSDP (de discovery process) I can see two different UPnP servers that implement WANIPConnection service type, one is my ADSL ...
0
votes
0answers
22 views

Setting up a web server behind a ZTE NAT

I have developed a web app in Java using netbeans and running on a glassfish server attached to netbeans. I would like to show this to some people but I can't get it running across the web. It works ...
-2
votes
2answers
65 views

How can i find the ISP IP allocated to my Router?

I am using Router to connect to internet. How can i find the ip address allocated to my router by isp in windows 7? I cant use whatismyip.com since it will give shared ip if i am behind a CGN.
0
votes
0answers
63 views

How to expose local loopback to (VirtualBox) VM connecting to host via NAT (VirtualBox NatNetwork)

I'm using the VirtualBox NatNetwork type to connect most of my VMs to the host (with the required ports set up for forwarding). I'd like to know how I can connect to the local loopback ("localhost") ...
0
votes
1answer
26 views

ADSL device providing No NAT DMZ alongside NAT (IPv4)

I have an ADSL modem/router/switch which performs NAT. It does this even for the one host it can be configured to provide a DMZ. I want to be able to perform Nmap scans from a specific host and there ...
1
vote
0answers
27 views

A lot of random NAT tables appear

My brothers Mac seems to be infected. It keeps on sending UDP and SYN floods to our router, and it multiplies my ping 10 times.When I look in the NAT Mapping table there are a lot of random address ...
0
votes
0answers
22 views

How do I, on a Ubuntu Server acting as a NAT, forward all requests for a subnet to a VPN?

I have an Ubuntu server handing out IP addresses in the 10.1.2.x range acting as a NAT. It is connected to a VPN, and has the IP address 172.16.1.250 from it. How do I have it forward any requests ...
0
votes
1answer
364 views

Fedora 20 NAT Configuration with firewalld

I'm trying to set up a simple masquerading gateway that will bridge between an internal network on ens33 (192.168.1.0/24) and a private network on ens37 (10.0.1.0/24). It's a VMWare image with two ...
0
votes
2answers
69 views

cisco wireless router not allowing full tcp handshake when in router mode

I have a recently-purchased cisco rv220w wireless router. My setup is as follows: Internet -> asa 5505 -> 10.0.1.0 subnet -> wireless router (subnet 10.0.3.0, public facing ip is ...
0
votes
0answers
40 views

How to setup private network using 2 routers with the following setup, one with ddwrt: internet modem > router > router?

I just purchased a DDWRT router with ddwrt v24 installed. Now I have a regular netgear router (R6300) that is connected to an internet cable modem. Internet Cable Modem > Netgear Router > DDWRT ...
0
votes
0answers
28 views

How to share folders b/n VirtualBox and Win 7 using NAT adapter and Samba

When I had my Adapter set to Host Only I followed this tutorial and was able to view the folder # \samba\share\ only buy typing \\192.168.55.444 in my windows start up. So, this means I could share ...
0
votes
1answer
171 views

Accessing VirtualBox with NAT adapter using SSH

I have a CentOs 6.5 running on a VirtualBox. I am using NAT adapter and my inet addr is 10.0.2.15 But, I can't access this host using ssh root@10.0.2.15 I get ssh: connect to host 10.0.2.15 port 22: ...
0
votes
1answer
53 views

packages from router dont match iptables dnat rule

I have the follow rules to forward port 443 from external to a internal host: IF_INET=ppp0 IF_INET_IP=1.2.3.4 # Router External IP IF_LAN_IP=192.168.0.1 # Router Internal IP ...
1
vote
1answer
159 views

Odd packet loss through NAT with two WAN interfaces

I have got a Linux server machine which I also use as network gateway / "router". It has three network interfaces active – two network interfaces connected to the internet over different ISPs and the ...
0
votes
0answers
20 views

NAT to remote computer

PC A (Windows 7) can create TCP connections to PC B (Windows XP) but B can't make outbound connections to anywhere due to firewall rules. If I need B to connect to a host in the same network as A, I ...
0
votes
0answers
34 views

Change current internet connection interface

I am at a dorm, where the internet is shut down at 11.30PM but I own a Vodafone dongle and I would like to automate the NAT setup, so that at 11.30pm, sakis3g is invoked to connect ppp0 to the ...
0
votes
1answer
714 views

NAT Port Forwarding in VirtualBox

I have enabled two adapters in my VirtualBox (running Ubuntu 12.10 Server Edition), with types as: Host-only and NAT. My main motive is to be able to connect two VMs running on two different hosts ...
1
vote
3answers
223 views

How to communicate with devices that have the same IP address

I have a situation where I need to communicate via telnet to multiple devices that have the same IP address. The context is that I am writing a "final test" of devices in a manufacturing facility. ...
0
votes
0answers
66 views

Windows 7 Samba-Server Access via Routing

My Network is split up in 2 Sub-networks (network 1: 192.168.240.0/24 and network 2: 10.0.0.0/8). Network 2 has a Samba server on it. Both are connected via a router, network 2 is reachable from ...
0
votes
1answer
160 views

VMWare Fusion 6 Nat translation issue

I have the following network diagram, using VMWare Fusion 6 I am able to ping from the en0 interface on my mac to all of the 172.16 network, and on the custom linux kernel (2.6.x) base I can ping ...
0
votes
1answer
57 views

How to setup my machine so I can reach my website from inside and outside my network?

I have a home web server and I cant access website from the external ip when inside my local network (due NAT loopback). Im trying to be able to seamlessly access my sites from outside and inside my ...
0
votes
0answers
33 views

Apple Store Content Downloading Errors

Setup: I have two iOS devices and a Windows PC with iTunes. I am trying to download newly purchased music, book, app, or update an app from the Apple store over my LAN. The LAN has two routers between ...
-3
votes
2answers
118 views

How does Network Address Translation (NAT) works on a home router? [duplicate]

I have three computers connected to a router at home. I am sure my router has only one address. When the packet arrives from computer 1, the source IP is translated to the router IP address. Let's ...
0
votes
1answer
87 views

Linux nat with a secondary ip address

I want to setup nat on a server/router with a multiple public ip addresses (on different subnets and with different gateways, but the same physical ethernet interface), using address A for all local ...
1
vote
0answers
562 views

Why can't I access MySQL server with port forward rule in router?

This is my setup (the relevant parts, anyway): I have port forwarding rules in place (in the Linksys) for all the relevant ports and I've restarted that router multiple times, each time hoping that ...
3
votes
1answer
272 views

How would I test to see if I'm behind carrier grade or regular NAT?

Inspired by the comments to this answer and its question. Some of my local ISPs are using carrier grade nat, and as someone who occasionally runs his own servers, remote support, it would be highly ...
1
vote
2answers
102 views

Connecting to an SSH server behind a NAT

I am having trouble connecting to an SSH server behind a NAT on an ubuntu workstation. I've installed openssh package(both the client and the server) and forwarded port 22 through the NAT and tried to ...
1
vote
1answer
20 views

Grabbing DHCP from DMZ?

Is it possible to grab DHCP from the DMZ of a router above? Essentially i want to have a setup like this. DMZ DHCP ------> Router (master router) | | ...
0
votes
1answer
67 views

How to NAT to different interfaces under linux?

I have an Ubuntu 12.04 server with 4 ethernet interfaces, 2 of which connect to nonconfigurable network devices on eth5 and eth6. Each device can only be reached on 192.168.100.1 via telnet. I believe ...
0
votes
2answers
324 views

Two network-ranges, one gateway - Double NAT issue

I have one network 192.168.0.x which is slowly running out of IP addresses. I wanted to remedy this by creating a second network for mobile devices (192.168.1.x). The first network has a gateway of ...
0
votes
0answers
81 views

unable to configure nat on centos 6.4

i have configured nat on my centos 6.4 on vmware workstation with the following cofiguration i have two ethernet adapters eth0 and eth1 eth0 has public ip automatically taken by dhcp eth1 has private ...
1
vote
3answers
35 views

Networking overview

I've been reading about networking hardware and network technologies recently, but I still can't quite link everything together. The route: Internet -> Modem -> Router -> Wireless Access Point ...
0
votes
0answers
87 views

client still cannot get internet access from gateway pc

I have already set up a laptop as a gateway in ubuntu 12.04. with 2 interface cards. internet >> eth0 >> gateway pc >> eth1 >> Access Point for eth0 IP dhcp for eth1 Static Ip 192.168.5.1 Access ...
0
votes
1answer
24 views

In P2P networked applications is there a point to portforwarding at one level but not the other?

I connect to the internet through a VPN service that offers port forwarding. I'm wondering if there would be a point because the regular Ethernet connection I connect to the network through is behind ...
1
vote
2answers
177 views

Router Behind A Router

My condo building provides wifi. However they have a stupid terms of service window you have to accept before getting access. I wrote a script that can post automatically to that terms of service ...
0
votes
1answer
310 views

How can I get VMware Fusion to give a static IP to an Ubuntu guest?

I looked at How to assign a static IP address to my VMWare machine? and didn't find an answer: I am running VMware Fusion on Mavericks with an Ubuntu Saucy guest, the guest connected to the network ...
0
votes
1answer
158 views

Network adapter connected by NAT has same address as host

I have created a virtual machine with 2 network adapters, one connected to the host using NAT and the second connected through a host-only adapter. This set-up works for what I want to do, Give the ...
0
votes
0answers
639 views

How to configure AirPort Extreme as the DHCP/DNS/NAT server where DSL modem/router does them?

I have an AirPort Extreme BS and a modem/router (ISP's NetMaster). I want to host my own websites from my Mac Mini with OS X Server. At the moment, ISP's router is the DHCP/DNS/NAT server, and AirPort ...
1
vote
1answer
2k views

Why is my connection refused when port-forwarding?

This question is related to this: Application / Device setup for remote network connections I have a 2wire 3801HGV router and I made some firewall settings to open some ports on one of my connected ...
2
votes
1answer
227 views

NAT with IPv6 (Forced by ISP)

My ISP has recently decided that "high bandwidth clients" are now forced to use IPv6. While I can plug my laptop with Win7 directly into the modem and I have access, connecting routers or my ...
0
votes
1answer
245 views

Home router with NAT makes internet much slower than with bridged-IP

I have a BeWAN iBox A5100 wireless router and a 100 Mbps direct internet connection (non-DSL). When I use the bridged IP option, speedtest.net reports downlink speed as 85mbps which is quite OK. When ...