Network Address Translation, a technology used to translate a private IP address into a public IP.

learn more… | top users | synonyms

2
votes
0answers
44 views

Simulate SNMP Trap with SNAT

I have to test SNMP 2c Traps. I want to send those traps from some computer and the trap destination has iptables. So before the trap enters the NMS, I could just rewrite the real source of the trap ...
1
vote
1answer
63 views

PS3 Ideal NAT Type

On the "Internet Connection Test" on my PlayStation 3, it lists my "NAT Type" as "Type 2." What is the ideal NAT Type and how does the NAT Type affect my games and streaming media?
1
vote
0answers
249 views

Cannot VBoxManage ModifyVM --nataliasmode1 when running

I tried to run modifyvm PS C:\Program Files\Oracle\VirtualBox> ./vboxmanage modifyvm XXX --nataliasmode1 proxyonly VBoxManage.exe: error: The machine 'XXX' is already locked for a session (or ...
0
votes
1answer
165 views

How to setup a HTTP caching proxy inside a NAT which is not a gateway?

I have the following setup of OSI level 2 and 3 devices in my IPv4-LAN with internet connection behind a NAT (all clients and servers are in 192.168.1.0/24) Internet | Gateway (WiFi-"Router")/NAT ...
2
votes
1answer
190 views

How does my computer's firewall work? Like inbound rule, outbound rule, reply?

So I understand how NAT works, but I don't understand how firewall works. With non-symmetric NAT, if someone sends me a packet, it gets blocked, but it I send someone a packet and they get that packet ...
1
vote
1answer
382 views

vpn, IP forwarding and nat

I have setup a Softether VPN on an Ubuntu 14.04 server in an aws network which has about a dozen servers using this guide. The only difference is that I have used SecureNat and softether DHCP. I can ...
1
vote
1answer
398 views

Virtualbox - how to custom NAT and port forward?

How can I use Virtualbox custom NAT and also port forward? For demos, I am running my VMs behind NAT on my laptop. If I run it in the vanilla NAT mode, then each VM I spin up automatically gets 10.0....
1
vote
1answer
63 views

How can I configure my two routers so any device can connect to a server on any other?

Network setup: ADSL2+ modem/4-port router (SpeedStream 6520) Wi-Fi+3-port router (TD-W8960N, 4th/WAN port connected as device to modem/router) I have to admit that I know pretty much nothing about ...
1
vote
0answers
353 views

Why do my nat iptables rules not work with marked packets?

System: debian squeeze, Linux server 2.6.32-5-amd64 #1 SMP Tue May 13 16:34:35 UTC 2014 x86_64 GNU/Linux, iptables v1.4.8 lsmod | grep iptable iptable_security 2176 0 iptable_mangle ...
0
votes
3answers
62 views

How do clients identify the router on a network?

How do clients connected to a LAN network with a NAT router connecting the network to the internet, identify the NAT router and hence know where to send their traffic for the wider internet. If this ...
0
votes
1answer
73 views

port forward in INPUT level

I want to change the destination port of the ipv6 packet in the INPUT level. So I tried to use ip6tables with nat in the INPUT level but seems this command does not work # ip6tables -t nat -I INPUT ...
0
votes
1answer
3k views

pfsense with 4 WAN IP and outgoing NAT

I have a pfsense with a single wan ip, i want to assign multiple wan ip's. The pfsense machine is located on a vm machine with the other servers i wish to NAT forward. I want to give each server a wan ...
0
votes
4answers
361 views

Point of subnets

This page gives two options for if you have more than 254 hosts, get another IP range or use subnets. But if you've got an IP address range which lets you have more than 254 hosts, why not just keep ...
0
votes
3answers
33 views

Linking 2 Linksys Wireless G Routers to have 2 separate networks

I am creating a lab for a group of people and I want to perform a miniature netwars. My plan is to have 2 wireless routers that the two teams can gain access to their respected router. How do I link ...
1
vote
1answer
49 views

How to enable miredo UPnP-Enabled Symmetric NAT Extension

I have linux mint and miredo installed on both machines. Both machines are behind symmetric NAT. Routers have UPnP enabled. Does miredo support upnp routers? How to enable UPnP-Enabled Symmetric NAT ...
0
votes
2answers
59 views

link machines which are both behind NAT via ssh tunnel

I have two machines. both behind NAT. Also I have access SERVER from each machines. Is there way to do ssh tunnel from machine1 to machine2 via SERVER? Client machines are linux mint. SERVER is ...
3
votes
2answers
2k views

Setting up DHCP and NAT on apple extreme with Virgin Media SH (APPLE)

I'm currently going mad trying to get my Apple Time Machine to be the DHCP and NAT Server. I've turned off DHCP in the Super Hub config and turned DHCP and NAT on in the Time Machine. Doing this, I ...
0
votes
3answers
101 views

Routing to sub network with local DNS

Short and clean question We has domain that can be resolved and accessed from internet as ip. On host with that ip we has NAT and virtual machines that hidden behind that NAT. How can we give access ...
0
votes
2answers
36 views

NAT how to configure with a VPN

Good morning, I'm in trouble. I need to be able to connect to my Windows PC (not locally) and I cannot open my router ports (my internet provider doesn't let me). So I've been thinking on creating a ...
0
votes
0answers
476 views

Zyxel Router Static IP setup

I need assistance with a static ip setup. The router is set up with the details for the static IP and the computer is able to browse the Internet and able to ping the static IP. The problem that comes ...
0
votes
0answers
31 views

Manage NAT using a tool

I have a Raspberry Pi on which I had previously installed Raspbian and am now installing another version on again. It is mainly used to be a test maschine for small programs and primarily as a NAT ...
0
votes
0answers
107 views

Why can't my second router (in DMZ) automatically find DNS settings?

I'm trying to set up my own router after the ATT modem/router combo. There is no bridge mode to bypass the ATT router. So I set up the DMZ to point to my personal router and wasn't able to get any ...
0
votes
1answer
165 views

How to reliably set up communication between the VirtualBox guest OS and host OS?

I have a VirtualBox (Windows 8 guest on a Windows 8 host) with NAT networking set up. I would like to set up the guest system to emit Growl messages that would be picked up by a service on the host. ...
0
votes
0answers
155 views

Internet gateway device protocol support?

As far as I understand, applications that need to transfer data across network address translators in a peer to peer fashion, like BitTorrent, usually rely on the UPNP IGD protocol to ask the router ...
0
votes
1answer
121 views

Accessing web service on routed (without NAT) network

I have network topology where I use two routers: R1 and R2. R1 has NAT enabled because my ISP allows only to connect one IP. R2 has NAT disabled because I'm planning to extend my network in the future ...
0
votes
2answers
350 views

Traffic redirection with Rasperry Pi router

I use a Rasperry Pi (running raspbian) as a wi-fi router. It redirects traffic from the Ethernet wire (eth0 - wire + ppp0 - L2TP connection, lx2tp used for it) to wlan0 (USB wi-fi dongle, hostapd used ...
0
votes
0answers
193 views

Public IP address port forwarding goes to my router's homepage and not my laptop’s server

I am trying to turn my laptop into an internal server to be accessed from anyone on the Internet. But whenever someone types my public IP address into their URL bar it sends them to my router’s config ...
2
votes
1answer
59 views

Custom nameservers over wifi hotspots with initial web login

I have built a portable router using a raspberry pi. My setup works, unless I connect to a hotspot that requires some kind of web based login. After some investigation, I think I've tracked it down ...
0
votes
0answers
416 views

Behind ISP NAT Firewall - Need to remotely monitor CCTV's

Here's my situation: I have a DVR which is capable of allowing me to remotely view my shop CCTV's over IP.However, I'm behind the ISP's NAT firwall and have no ability to open ports on the router, so ...
0
votes
2answers
115 views

If a port behind NAT sends a packet to a malicious host, can that host send packets to any open port, or only the port that sent the packet?

For example, a computer behind a NAT router uses Skype. Skype uses port 4000 to send packets to a server to establish indirect connections with other Skype clients. Since Skype had sent a packet to ...
0
votes
2answers
86 views

Change source IP of an incomming packet WIN7

I am receiving data through a specific TCP port and I would like to apply a rule on my Win7 Machine for my trafic (NAT??) : Every Frame coming from A --> Change Source Address to B & Every ...
0
votes
2answers
157 views

Port forwarding: how many routers between me and the internet?

I wish to ssh to a machine on my home network, so I intend to set up port forwarding. But how many routers are there between my home server and the external world (i.e. a global IP address)? I am ...
0
votes
1answer
219 views

Nagios configuration to monitorize virtual machine using Hyper-V with NAT

I will start by thank you very much for any help that i may possible have from any of you. I have a centos box that have nagios installed. I'm able to monitor several servers so far but I’m stuck in ...
0
votes
1answer
604 views

Is there any benefit in activating NAT loopback for basic video gaming? Does it help a PS4 use UPnP?

I have a router that I can turn on and off NAT loopback. The router is just used for game playing and phones and normal everyday Internet browsing. My question is this will there be any benefit to ...
0
votes
2answers
489 views

How do routers avoid port clashes when DMZ and NAT are used?

NAT in consumer routers makes the router translate a request from an internal device on a private IP (say dev0) and a specific source port X to a request from it's own public IP at a different source ...
1
vote
1answer
565 views

Remote SSH access doesn't work when OpenVPN client is enabled on DD-WRT

I have a DD-WRT router which I would like access remotely via SSH. The DD-WRT is behind an ADSL router which has port forwarding for port 22 enabled, DD-WRT SSH access and service are set to port 22, ...
0
votes
1answer
271 views

Need clarification for Sonicwall “Public Server” wizard NAS policies

I used the SonicWall TZ105 "Public Server" wizard to add NAT policies for an internal (non-DMZ) server, but I do not understand the need for all the Custom policies that resulted: # Source ...
0
votes
0answers
247 views

vagrant guest connection problems

I have VirtualBox 4.3.22 on OSX 10 with guest additions installed In VirtualBox I have: Vagrant/CoreOS guest vm in NAT networking mode with eth1 addr 172.17.8.101 Ubuntu 14.04LTS guest vm in ...
2
votes
1answer
444 views

How does a IP packet from a remote server “find” a home computer behind a NAT firewall?

I understand communication between a remote machine, e.g. a webserver and users home computer/device can only occur if the users computer initiates the communication (assuming your firewall/network is ...
0
votes
2answers
58 views

NAT and UDP source port

My question is somewhat extending on this discussion: NAT and UDP replies Scenario: Machine A behind NAT Machine B on the internet machine A:Port M sends a UDP packet to Machine B:PortN Machine B:...
-1
votes
1answer
123 views

topology for an unmanaged switch (firewall)

I'm considering an unmanaged switch. My understanding is that many of these devices explicitly lack a firewall. In that case, what do you use as a firewall? I suppose one option would be to use a ...
1
vote
0answers
121 views

OpenVPN sans port forwarding on unfriendly networks

I have a problem. I'm about to move onto campus right in the middle of the semester. For a student, I have a complicated network setup where all of my systems are reliant on NAS and all of them VPN ...
0
votes
0answers
53 views

What is wrong with this description of NAT as it relates to home networks?

I gave the following description of NAT address assignment as it relates to home networks as part of an answer on stackoverflow. For more details the full stackoverflow question is here ... Your ...
2
votes
1answer
1k views

No data received (Error code: ERR_EMPTY_RESPONSE) when accessing goo.gl short URL

I have a strange problem. I cannot access a web via goo.gl short URL on any browsers (Chrome, Safari, Firefox). I'm on Mac OS X 10.10.2 The status bar will show "Waiting for goo.gl..." for 30 sec or ...
0
votes
1answer
428 views

VMWare: Linux host doesn't get NAT connection from Windows Host

I've been trying the last couple of days to get NAT networking to work. I am running VMWare workstation on Windows 7, and installed an Ubuntu image. The image starts up fine, but the vm does not get ...
1
vote
1answer
381 views

Securing remote access to local server behind NAT router

I want to remotely access a Linux server in my private local LAN via HTTPS and SSH. The server ist connected to my DSL router (German Fritz!Box). As I can't directly access my server because of this,...
0
votes
1answer
274 views

slow internet access when routing via a server (both using iptables NAT and ssh tunnelling)

I have a spare computer powered by a dual core intel atom N550 CPU and 2GB RAM (I will refer this as "the server"). It is running lubuntu 14.10 x86 (32 bit) with lightdm service disabled (hence, no ...
2
votes
3answers
3k views

How to link two routers LAN to WAN

My former modem was replaced by a all-in-one modem/router (10.1.9.1/24) after a speed upgrade. I still have my DD-WRT router (10.1.10.1/24), which I want to be my main router, i. e. as DHCP server, ...
0
votes
2answers
542 views

Router to Firewall to Internal network NAT with Single Public IP

In an effort to learn more about networking I have picked up some old Cisco equipment for home use. I have a 2811 router, a PIX 515e firewall, and a switch (don't remember the model). My incoming ...
0
votes
1answer
536 views

Can't find other computers in network when using NAT in vmWare

I have created a Windows 7 VM using vmWare Workstation 10 on a Windows 7 host computer. The host computer has three LAN connections. The VM accesses two of them via bridged networking, which works ...