Network Address Translation, a technology used to translate a private IP address into a public IP.

learn more… | top users | synonyms

-1
votes
1answer
312 views

Connecting to Apache server over SSL when it's behind NAT and the public IP & port are known?

I want to connect to an Apache server over SSL (with both client & server certificates) when both the client and server are behind NAT firewalls. I can't port-forward and I have to assume that all ...
0
votes
1answer
61 views

Can not connect home network devices from internet // Cablecom deferring my requests

I reciently moved to Switzerland. I was trying to set my home network configuration as I'm used to (SSH Access to my box, VPN Server, ...) I did the configuration on the router and I was even able to ...
0
votes
1answer
88 views

Accessing site running inside the Guest VM (Ubuntu LAMP) webserver running over Max

I'm running Vmware Fusion on a Mac (host) inside which I am running VM (Ubuntu + LAMP) hosting sites like say example.com (and few other sites). When I try to access example.com from inside the ...
0
votes
2answers
299 views

NAT traversal of VPN/proxy server in home network with no access to the router

I want to setup a VPN (or proxy) server on my workstation located outside my permanent residence and behind NAT. I need to use workstation's network IP. The problem is I don't have physical nor admin ...
1
vote
2answers
2k views

How to disable NAT and still have internet connection? (I have IPoE not PPPoE)

Basically NAT is being a huge pain in the ass for me because the tiny NAT table of my modem/router keeps filling up all the time and then I can't get any packets through for several minutes (this ...
0
votes
1answer
2k views

How to test whether a router supports NAT loopback?

I've been unable to find much information on whether my router (Linksys EA4500) supports NAT loopback, so I'd like to perform a test to tell me whether accessing my external ip address from within the ...
0
votes
1answer
370 views

Plivo SIP problems with NAT traversal

Ok, I've looked and looked, and can't seem to find anyone that's written about this problem. I have a simple office setup where there are two SIP phone extensions (Polycom 331) behind a Sonicwall ...
0
votes
1answer
43 views

where is NAT adapter on virtualbox

On my Ubuntu 14.04 guest in Virtual Box when I set the connection type to “Host only Adapter” I can set the IP address of vboxnet1 to what I want. But I do not know where is NAT adapter? Or better to ...
1
vote
1answer
932 views

Changing the default network VirtualBox assigns to VMs attached to NAT

By default, VirtualBox assigns a 10.0.2.0/24 address to a VM attached to NAT. Is it possible to change NAT to a different network? This is not a duplicate question. I know it is possible to define a ...
0
votes
0answers
20 views

Simultaneous Internet Access on two hosts issue. Is it caused by NAT? [closed]

Sometimes I have troubles with Internet access on my PC while other person connected to the same LAN is using Internet simultaneously. Webpages loading is way too long or it just breaks. I suppose NAT ...
0
votes
0answers
224 views

SSH Reverse tunnel assistance with application

Well it does in a way. If I do something like: ssh -R 27011:localhost:25566 USER@NAME.COM -p 27010 NOTE: substituting the real username and domain with USER@NAME.COM for security. NOTE: The port for ...
0
votes
1answer
748 views

NAT several subnets with same IP range to a single interface

I have the following problem: a customer have several LANs, for example LAN1, and LAN2 with the same private IP ranges (192.168.10.x), and I need to monitor all the networks. I have name three ...
0
votes
1answer
94 views

Why IPSec ESP needs NAT-T

I understand why it is not possible to use IPSec AH over a NAT server, since the IP header is included in the MAC too. But I am confused about ESP with Authentication (I am talking about tunnel mode, ...
1
vote
1answer
374 views

How to experience UDP hole punching using Ncat under Linux?

I'd like to see UDP hole punching in action. I tested it under Linux, using Ncat. Here's what I tried: Open port 1234/UDP on host A and port 12345/UDP on host B's firewall (I'm still behind NAT, but ...
1
vote
2answers
558 views

Multiple network interfaces with the same local IP address

I run several VPN connections that give me different external IP addresses. But these VPN servers often give me the same local IP address. So I can end up with the following configuration: eth0 [...
0
votes
1answer
110 views

Multiple VNC servers behind a NAT

I need to remotely access 100+ work computers (Windows XP, Vista and 8). The PCs are all on the same local network, their dynamic IPs set by DHCP. They're behind a NAT and the public IP address is ...
0
votes
1answer
302 views

Getting IoT devices to connect to an authenticated wifi network

I have several Internet-of-Things devices such as the Intel Galileo and Raspberry Pi. I'd like to connect these up to the internet obviously, because without it they're just things. Unfortunately my ...
0
votes
1answer
334 views

Virtual servers not forwarding when DMZ set in DLink 2730B

My router is a DLink 2730B. The target machine IP is 192.168.1.6. I’ve applied DMZ Host to this IP, and have configured on 'Virtual Server' the following settings: Port 21 on 192.168.1.6 is ok, I ...
1
vote
0answers
29 views

Preserve NAT mappings across reboot

My Linux router is able to reboot and reconnect all network interfaces pretty fast (~10 seconds, thanks to systemd and a SSD disk), and comes up with the same IP addresses. Unfortunately the reboot ...
1
vote
1answer
126 views

Filtered port with virtual server setup on a NAT

I have a Symphony SY602 ADSL router and I want configure a dynamic DNS to access my system remotely. I made a NAT virtual server in routers configuration and this is what I configured: Server Name ...
1
vote
1answer
511 views

OpenWRT NAT only for clients on certain WLAN network

I am using an OpenWRT powered WLAN router as an access point for my network. Everything on the network id run through a PFSense box so that I can have full control from there. I would like to have a ...
0
votes
1answer
28 views

How to find NAT responce port

Does NAT work as follows? My computer 192.168.1.5 sends a request on port:5555 (for example) this request goes to my router 194.564.23.67 (public ip) the NAT then changes the port and forwards the ...
1
vote
2answers
191 views

How to IPv4 through IPv6?

My ISP (Unitymedia Germany) tunnels IPv4 traffic through slow and unstable CGNAT (they call it "AFTR", which seems to be a similar thing) but comes with reliable and native IPv6. Now, is there any ...
2
votes
1answer
411 views

Cannot ping or ssh from lan to virtual machine

I have next setup: My home lan = 192.168.1.0/24 My virtual lan = 192.168.207.0/24 My laptop = 192.168.1.109 (dhcp OS=Windows7) My desktop = 192.168.1.206 (fixed ip OS=Windows8) My virtual machine ...
1
vote
1answer
216 views

Accessing two devices with the same IP?

I want to connect my laptop to two WiFi enabled digital cameras, that have the same IP hardcoded: 192.168.1.1 One solution that I've successfully tried: Connect one device to the laptop's built in ...
0
votes
1answer
316 views

How does NAT Work on the Packet Level?

So I am studying for my Network + and CCNA and had some confusion about how packets work. I was reading a similar topic at How do IP answer packets reach their destination inside of a private LAN? ...
2
votes
3answers
3k views

How do I properly SSH into a server behind a NAT while maintaining the tightest possible security?

I have a VPC in Amazon AWS. There's a NAT Server running in a Public Subnet that connects to an Internet Gateway. I have a bunch of servers running in various private subnets within the VPC. I'd like ...
0
votes
1answer
312 views

Does NAT forwards ping requests and port scans to all subnet computers?

If I ping some friend's public IP address, this is usually the address of his router. Does the router forward the ping request to all devices on it's network? If the devices are all turned off will ...
0
votes
1answer
463 views

BitTorrent seeding despite UPnP and NAT-PMP being turned off

Using Deluge BitTorrent client and being behind two NATs (home router + ISP router), I've turned off both UPnP and NAT-PMP and let it seed one completed torrent, observing the behavior. To my surprise,...
0
votes
3answers
889 views

Can a VMWare player virtual machine receive udp packages?

I have a virtual machine running in VMWare player v6. The network type is NAT. An application in my virtual machine sends UDP packages to a server in the network of the host machine and needs to ...
0
votes
1answer
416 views

Conntrack gets incorrect forwarding rules for outgoing protocol 41

I'm trying to forward protocol 41 (ipv6-in-ipv4) for an HE tunnel through a WRT54G running Tomato 1.28. Tomato 1.28 is running a 2.4 kernel that knows absolutely nothing about protocol 41, except that ...
1
vote
0answers
76 views

Internet connection dropped when nat created and routed via vpn [linux+iptables]

I've got a very frustrating network issue. Currently I'm living in a hotel in which I need to authenticate through a website in order to obtain internet access. I've also got xbox360 that I want to ...
0
votes
1answer
467 views

Can only connect to uTorrent WebUI when on local network

My port forwarding is all set up, I can connect to WebUI hosted from my laptop with my phone but only with my LAN IP when I'm on the same network. When I try to use the public one (WAN), I can't get ...
0
votes
0answers
50 views

Special type of DMZ?

So I have a standard modem-router setup all great to go, my Modem gives an IP Address from my provider via DHCP according to my Mac address. All is good. However, I now want to expose a new virtual ...
1
vote
0answers
155 views

Point an internal IP address to an external URL

Is it possible to set a router up so a machine in the LAN can access an Internet URL using an internal IP address? I have a cheap DVR box that can save recorded videos to a FTP server, but only ...
1
vote
0answers
369 views

OpenWRT sending invalid packets to WAN when Android phone connects

I have a Netgear WR703N wireless router flashed with OpenWRT 12.09 "Attitude Adjustment" connected to my school's Ethernet network, and our IT department sent emails alerting me that it's "...
0
votes
1answer
1k views

RV130 won't pass http unless behind another NAT

I'm attempting to replace a Linksys WRT54G with a Cisco RV130 for a home internet connection. For the moment, the setup is about as simple as it gets. Cable-modem -> RV130 -> Switch -> Multiple ...
0
votes
1answer
101 views

iproute2: How do i connect one machine to the internet via another

I have the following setup: A > 169.254.8.125/16 <--(ad-hoc)--> 169.254.9.109/16 < B > 192.168.178.21/24 <--(wifi)--> 192.168.178.1/24 < AP/router > internet I want to connect A to the ...
0
votes
1answer
383 views

How to NAT between 2 network interfaces without impacting routing

My Linux-based router has 5 Ethernet ports. It is currently acting as a router between ports 1 & 2 and the dedicated WAN port, without NAT. Port 1 is 192.168.1.1/24, port 2 is 192.168.2.1/24, WAN ...
0
votes
1answer
258 views

VirtualBox NAT port forwarding configuration (<1024)

I'd like to forward requests from 127.0.0.1:80 to a guest OS in VirtualBox VM (CentOS 7) - 10.0.2.15:8080. Is that possible? If I forward 127.0.0.1:9090 everything works fine, but as soon as I ...
0
votes
1answer
48 views

NAT and UDP replies by default

If I send UDP packets from Machine A with local port M behind a NAT to Machine B's port N, where Machine B is outside the NAT (elsewhere on the Internet), can I reasonably expect that NAT would pass ...
0
votes
1answer
204 views

iptables does not seem to be applying SNAT to packets sent on a raw socket

I'm writing packets from a user space program to my wireless interface wlan0. I've set up a SNAT rule with iptables as follows iptables -t nat -A POSTROUTING -o wlan0 -j SNAT --to 192.168.1.3 And ...
0
votes
0answers
206 views

Disable NAT and have a direct WAN - LAN connection with just one PC?

I have a pretty old router which is behaving rather weird with UDP port forwarding (Seems to be blocking/not routing incoming connections). I need it to behave such that the cable is directly ...
0
votes
0answers
38 views

Trying to figure out NAT between modem and router

I just bought a new DSL modem and I'm trying to set it up optimally for my small home network. There are a few computers and smartphones which access the router which handles ethernet and Wi-Fi, then ...
0
votes
0answers
754 views

Setup router with 2 seperate LANs, one that pipes thru VPN, one that doesn't?

I use a VPN at home for privacy, but there are times where you do want your true public IP to be known. Like for Google Maps, or pizza. I currently use a software-VPN tool on my computer for this, but ...
-4
votes
2answers
252 views

Switching to IPv6 - Do I need a router? [closed]

In the future, since every IP (IPv6 adress) is going to be global, we don't need to use NAT. So basically, why do I need a router on an IPv6-only global network? Why not just replace my router with a ...
1
vote
1answer
98 views

How to forward a port in VM which is behind NAT

I see a few questions similar to my but, they didn't answer my question. I have a router. I have installed Debian in VM and setup a ssh server on it. I want to forward a port for this machine on my ...
2
votes
1answer
823 views

SSH and PWNAT for SSH Connection Between Two Separate NATs

Is it possible to use pwnat and SSH to establish a "peer-to-peer" SSH connection between two machines that are behind two separate firewalls/NATs? If this is possible, what are the steps that would ...
0
votes
1answer
83 views

Windows wireless bridge with NAT

Here is my setup: I have a robot that I want to access remotely, but there is no wired connection. If the robot was configured to DHCP, I think could bridge the wired and wireless connections on a ...
0
votes
1answer
588 views

How to re-enable NAT on Netgear CG3100?

I just accidentally disabled NAT on my CG3100. Now I only have 4 public IPs for all the devices. I really need to re-enable NAT on my CG3100. How do I re-enable NAT on a CG3100?