Network Address Translation, a technology used to translate a private IP address into a public IP.

learn more… | top users | synonyms

0
votes
1answer
2k views

Can't access my IP camera over the internet

I have an EasyN F3 (F3-M166) IP camera. It works fine on local IP address, but I can't access it over internet. This is what I have done step by step: I configured the local IP (camera_ip) and port ...
0
votes
1answer
10 views

Windows wireless bridge with NAT

Here is my setup: I have a robot that I want to access remotely, but there is no wired connection. If the robot was configured to DHCP, I think could bridge the wired and wireless connections on a ...
0
votes
0answers
5 views

How to configure Kali in Virtualbox using NAT behind a corporate proxy

I recently installed Kali as a VM in virtualbox. My company uses a proxy that authenticates using domain credentials. I have included this information in apt.conf and the http_proxy variable (though ...
-3
votes
1answer
31 views

Switching to IPv6 - Do I need a router?

In the future, since every IP (IPv6 adress) is going to be global, we don't need to use NAT. So basically, why do I need a router on an IPv6-only global network? Why not just replace my router with a ...
1
vote
1answer
13 views

How to forward a port in VM which is behind NAT

I see a few questions similar to my but, they didn't answer my question. I have a router. I have installed Debian in VM and setup a ssh server on it. I want to forward a port for this machine on my ...
1
vote
1answer
26 views

SSH and PWNAT for SSH Connection Between Two Separate NATs

Is it possible to use pwnat and SSH to establish a "peer-to-peer" SSH connection between two machines that are behind two separate firewalls/NATs? If this is possible, what are the steps that would ...
0
votes
0answers
7 views

ShrewSoft VPN, multiple users with same external gateway issues

I have a VPN firewall, we can connect more than one user if using different external gateways. If we have more than one user with the same external gateway then only one can connect and keep pinging ...
0
votes
2answers
4k views

Will disabling NAT on my wireless router cause a performance hit on my DSL router?

I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I ...
0
votes
1answer
15 views

How to re-enable NAT on Netgear CG3100?

I just accidentally disabled NAT on my CG3100. Now I only have 4 public IPs for all the devices. I really need to re-enable NAT on my CG3100. How do I re-enable NAT on a CG3100?
0
votes
4answers
2k views

How to do port forwarding in D-link Glb802c?

I have some questions about port forwarding on my D-Link Router GLB-802C. For example: My local machine's IP is 117.1.1.81 My router's IP is 117.1.1.1 My Public (Web) IP is 117.16.1.1 My ...
0
votes
0answers
15 views

port forwarding in windows 7 to vmware

I have a windows 7 in a network with ip 10.1.1.74 and I have vmware with centos which it's ip is 192.168.160.129 and has configured as NAT with my local windows 7. I have set up a apache httpd server ...
2
votes
1answer
2k views

How to use NAT iptables rules for hostapd

My PC is equipped with two net interfaces - wlan0 and eth0. I want to use WiFi port as access point on wlan0. So i use hostapd facility and it works properly in routing mode in local network. Users ...
0
votes
1answer
17 views

Double NAT with access to both gateway web interfaces

I have a Cisco Linksys E3000 home router that I appreciate. However, my new (but temporary) ISP will want me to use their Huawei router for their service once I get connected next week. This creates ...
0
votes
1answer
31 views

Switch with NAT/port forwarding?

I'm sorry for this basic question, but I'm stuck. I'm looking for some networking equipment that allows me to route WAN traffic (internet) to a client on a local LAN based on TCP/UDP port. That is, ...
4
votes
1answer
4k views

VirtualBox NAT over proxy

I use VirtualBox 4.1.8 on a Ubuntu 10.04 host system. I have an HTTP proxy server on the host system. How do I configure the VirtualBox to NAT the virtual machine's network and use the HTTP proxy for ...
0
votes
0answers
42 views

How to see my own domain from host server?

I'm using Apache 2.4 running on a Windows 7 machine that is behind a NAT using port forwarding and I'm unable to use http://example.com from that machine, although it works fine from any other ...
0
votes
1answer
2k views

Torrent upload ratio not updated on Synology DS212+

I have a Synology DS212+ NAS running DSM 4.2-3211 (current version). I use it for several purposes including torrent download using Download Station and a tracker that needs authentication. My ...
0
votes
1answer
265 views

Fedora 20 NAT Configuration with firewalld

I'm trying to set up a simple masquerading gateway that will bridge between an internal network on ens33 (192.168.1.0/24) and a private network on ens37 (10.0.1.0/24). It's a VMWare image with two ...
0
votes
0answers
23 views

How to create 2 NAT network types in VMware Workstation 9?

I have a virtual domain network using the VMnet8 (NAT) adapter which simply consists of 2 VM; Windows Server 2012 and Windows 8.I have disabled the DHCP service from the VMnet8 setting due to WIndows ...
0
votes
1answer
35 views

Why from a virtualized Ubuntu system I can't discover the ip address of my router?

I am not into computer network and I have the following problem finding my router IP address. I have a Windows 8 PC on on which it is installed VmWare Workstation that virtualizes Linux Ubuntu. The ...
1
vote
1answer
36 views

How can I specify which network to use for internet connection and which for viewing network computers

I have two Network Adapters on Windows 7 64 bit operating system which is installed on Oracle Virtual Box. I created those two adapters as follows: NAT VirtualBox Host-Only Ethernet Adapter If I ...
1
vote
3answers
197 views

How to communicate with devices that have the same IP address

I have a situation where I need to communicate via telnet to multiple devices that have the same IP address. The context is that I am writing a "final test" of devices in a manufacturing facility. ...
0
votes
1answer
43 views

(Not all) port forwardings working correctly

I have two port forwardings configured on my internet router: router-external-ip=85.93.c.d:22 --> internal-host:22 router-external-ip=85.93.c.d:8010 --> internal-host:22 (Having only the last one ...
0
votes
1answer
47 views

How can I bypass my modem with NAT to open my ports to the outside?

My Internet provider gave me a Modem-Router with WiFi capabilities but it has all ports filtered for incoming traffic. What I'm trying to do is to use NAT in someway that allows me to recieve incoming ...
0
votes
1answer
30 views

Connect to internet through two gateways

I am developing a library to perform port forwarding in NAT devices. Using SSDP (de discovery process) I can see two different UPnP servers that implement WANIPConnection service type, one is my ADSL ...
1
vote
1answer
46 views

Where to place a port-mirroring switch for home network monitoring

I want to start monitoring traffic that goes in and out of my home network. I'd like to collect information like bandwidth usage and (specifically) HTTP requests from home computers to websites. From ...
0
votes
0answers
20 views

Setting up a web server behind a ZTE NAT

I have developed a web app in Java using netbeans and running on a glassfish server attached to netbeans. I would like to show this to some people but I can't get it running across the web. It works ...
-2
votes
2answers
62 views

How can i find the ISP IP allocated to my Router?

I am using Router to connect to internet. How can i find the ip address allocated to my router by isp in windows 7? I cant use whatismyip.com since it will give shared ip if i am behind a CGN.
1
vote
0answers
491 views

Why can't I access MySQL server with port forward rule in router?

This is my setup (the relevant parts, anyway): I have port forwarding rules in place (in the Linksys) for all the relevant ports and I've restarted that router multiple times, each time hoping that ...
0
votes
0answers
55 views

How to expose local loopback to (VirtualBox) VM connecting to host via NAT (VirtualBox NatNetwork)

I'm using the VirtualBox NatNetwork type to connect most of my VMs to the host (with the required ports set up for forwarding). I'd like to know how I can connect to the local loopback ("localhost") ...
2
votes
2answers
13 views

Port based routing, 1 public mapped to multiple private ips

Simply put, I want this single public ip mapped into different private ip's based on port 111.1.1.1:80 -> 192.168.1.1:80 111.1.1.1:443 -> 192.168.1.2:443 is this a standard and possible?
0
votes
1answer
2k views

iptables trouble: nat with ip alias (virtual interface) not working

I'm setting up an Ubuntu 11.10 server to act as firewall for a network running several different SSL websites. The idea is fairly common: have all public IP's for each site aliased to the public ...
0
votes
1answer
26 views

ADSL device providing No NAT DMZ alongside NAT (IPv4)

I have an ADSL modem/router/switch which performs NAT. It does this even for the one host it can be configured to provide a DMZ. I want to be able to perform Nmap scans from a specific host and there ...
0
votes
2answers
59 views

cisco wireless router not allowing full tcp handshake when in router mode

I have a recently-purchased cisco rv220w wireless router. My setup is as follows: Internet -> asa 5505 -> 10.0.1.0 subnet -> wireless router (subnet 10.0.3.0, public facing ip is ...
1
vote
0answers
26 views

A lot of random NAT tables appear

My brothers Mac seems to be infected. It keeps on sending UDP and SYN floods to our router, and it multiplies my ping 10 times.When I look in the NAT Mapping table there are a lot of random address ...
0
votes
0answers
20 views

How do I, on a Ubuntu Server acting as a NAT, forward all requests for a subnet to a VPN?

I have an Ubuntu server handing out IP addresses in the 10.1.2.x range acting as a NAT. It is connected to a VPN, and has the IP address 172.16.1.250 from it. How do I have it forward any requests ...
1
vote
0answers
21 views

Xbox to Sonicwall TZ180 [closed]

First, not sure if this is the right place to post this. I have a Xbox 360 hooked up to a SonicWall TZ180. The SonicWall is then connected to my TP-Link router which is downstairs. When I play games ...
1
vote
1answer
40 views

Implementing a direct TCP link between computers hidden by a router with a server managing the connection

I'm working on an encrypted chat program and I'm trying to work out a way of sending messages directly between two computers which are hidden by a router (each have their own local IP address and are ...
0
votes
0answers
50 views

Running Hyper-V Manager behind NAT

I am running Hyper-V Manager on a Windows 8.1 box behind a router (actually a VMware Fusion VM). When I try to connect to my Hyper-V box, I get an error RPC server unavailable. Unable to establish ...
0
votes
0answers
16 views

would NAT router work behind a NAPT router

If I put a NAPT router behind the NAT router which is at the border of my company enterprise network, can the hosts behind my NAPT router access to the external network. Thank yopu for your response. ...
2
votes
1answer
83 views

IPv6 only LAN with NAT64 router for Internet

I want to disable IPv4 on my LAN and run only IPv6. I will use a NAT64 Juniper firewall to provide Internet access since I only have IPv4 Internet. Will this break applications? Will I be able to ...
0
votes
0answers
38 views

How to setup private network using 2 routers with the following setup, one with ddwrt: internet modem > router > router?

I just purchased a DDWRT router with ddwrt v24 installed. Now I have a regular netgear router (R6300) that is connected to an internet cable modem. Internet Cable Modem > Netgear Router > DDWRT ...
1
vote
1answer
154 views

Odd packet loss through NAT with two WAN interfaces

I have got a Linux server machine which I also use as network gateway / "router". It has three network interfaces active – two network interfaces connected to the internet over different ISPs and the ...
15
votes
5answers
9k views

SSH access to office host behind NAT router

I would like to access the ssh port of my office linux host from home. Unfortunately the host is located behind a NAT router. So, the IP address is not publicly available. There is however access to ...
0
votes
0answers
27 views

How to share folders b/n VirtualBox and Win 7 using NAT adapter and Samba

When I had my Adapter set to Host Only I followed this tutorial and was able to view the folder # \samba\share\ only buy typing \\192.168.55.444 in my windows start up. So, this means I could share ...
0
votes
1answer
136 views

Accessing VirtualBox with NAT adapter using SSH

I have a CentOs 6.5 running on a VirtualBox. I am using NAT adapter and my inet addr is 10.0.2.15 But, I can't access this host using ssh root@10.0.2.15 I get ssh: connect to host 10.0.2.15 port 22: ...
0
votes
1answer
34 views

Computer only accesses the internet when using a static DNS ip

My setup is wall-> Zyxel p-870h-51a VDSL2 modem -> DD-WRT router. The issue is that the modem has connected to the internet, but the computer is unable to. This is resolved if on the individual ...
0
votes
0answers
22 views

Modem not assigning DNS

I have a ZyXEL P-870H-51A V2 VDSL2 modem. Currently, the modem connects to the internet, but computers require to use a static DNS in order to use it, otherwise they fail to reach a DNS lookup. ...
2
votes
0answers
90 views

How to forward ports through ssh and nat to another machine

I have a problem when using ssh port forwarding and nat simoultaneously. Situation: Machine A runs a webserver on port 8080 Machine B is a raspberry pi which works like a little router. It has two ...
0
votes
0answers
36 views

Use rtpproxy as a NAT on openIMSCore

I have some problems, I want to ask about rtpproxy and OpenIMSCore server. Actually I want to make IMS running like this: client IPv4 -- > OpenIMS <-- ipv6client. I want to use RTPProxy as NAT, so ...