Network Address Translation, a technology used to translate a private IP address into a public IP.

learn more… | top users | synonyms

2
votes
0answers
101 views

Turning Computer into Router,Network Address Translation encryption.?

I have windows seven and am using connectify. but when i try to connect to the interner through my ethernet court in my dorm room the comp0uter doesnt recognize the ethernet cord. I belive that the ...
2
votes
0answers
61 views

Linux VM can not connect to the internet

I'm trying to set up an virtual server with connection to the internet. When I start a ping to the local network, there are no problems. When I try to ping an address from the internet, it shows that ...
2
votes
0answers
674 views

After NAT how to setup VPN in windows server 2008 r2?

We have one windows server 2008 R2 with about 10 Hyper-V virtual machines. We've used wizard that comes when you enable RRAS to setup NAT, so that virtual machines can connect to internet (and to ...
1
vote
0answers
20 views

OpenVPN sans port forwarding on unfriendly networks

I have a problem. I'm about to move onto campus right in the middle of the semester. For a student, I have a complicated network setup where all of my systems are reliant on NAS and all of them VPN ...
1
vote
0answers
25 views

Preserve NAT mappings across reboot

My Linux router is able to reboot and reconnect all network interfaces pretty fast (~10 seconds, thanks to systemd and a SSD disk), and comes up with the same IP addresses. Unfortunately the reboot ...
1
vote
0answers
50 views

Internet connection dropped when nat created and routed via vpn [linux+iptables]

I've got a very frustrating network issue. Currently I'm living in a hotel in which I need to authenticate through a website in order to obtain internet access. I've also got xbox360 that I want to ...
1
vote
0answers
58 views

Point an internal IP address to an external URL

Is it possible to set a router up so a machine in the LAN can access an Internet URL using an internal IP address? I have a cheap DVR box that can save recorded videos to a FTP server, but only ...
1
vote
0answers
149 views

OpenWRT sending invalid packets to WAN when Android phone connects

I have a Netgear WR703N wireless router flashed with OpenWRT 12.09 "Attitude Adjustment" connected to my school's Ethernet network, and our IT department sent emails alerting me that it's ...
1
vote
0answers
36 views

A lot of random NAT tables appear

My brothers Mac seems to be infected. It keeps on sending UDP and SYN floods to our router, and it multiplies my ping 10 times.When I look in the NAT Mapping table there are a lot of random address ...
1
vote
0answers
880 views

VirtualBox and Samba 4 on Linux Guest (NAT and Host Only)

Gentlemen, I really need a help from you to configure the "Samba 4" using the "Virtual Box". Here's the situation: In certain networks where I work, the Samba 4 works, in other does not. The guest ...
1
vote
0answers
2k views

Why can't I access MySQL server with port forward rule in router?

This is my setup (the relevant parts, anyway): I have port forwarding rules in place (in the Linksys) for all the relevant ports and I've restarted that router multiple times, each time hoping that ...
1
vote
0answers
65 views

How do I configure NAT to forward external requests?

I have three Raspberry Pi's connected to Linux machines and one computer (also a Linux machine) connected to a router which is connected to the Internet. My goal is to configure each Raspberry Pi and ...
1
vote
0answers
146 views

NAT routing command in windows

Is there any specific command in windows which do the following task: I want to modify the source IP address in the packet whose Destination IP is not in the private LAN, i.e., I have a virtual ...
1
vote
0answers
235 views

Tunnelling TCP connection through NAT

My server is in my school's NAT and my desktop computer is in my home NAT. I want to SSH to my server from home. I normally used school's VPN, but recently for some reason I can't. So I'm looking for ...
1
vote
0answers
107 views

Netgear NAT over LAN TO LAN

I have the following question: I need to connect through a vpn IPsec lan 2 lan tunnel with a partner but they want that I connect through a specific ip subnet which is not mine. Here's the situation: ...
1
vote
0answers
271 views

IP forwarding with iptables

Suppose there are hosts A and B. A is allowed SSH access to B based on its IP address. Consider now another host C. C does not have access to B, but if we could route its traffic through A, then C ...
1
vote
0answers
486 views

Routing table on Linux not respected

I have a very specific problem, building a Linux VPN endpoint (with external VPN Gateway), which should route certain networks over the tunnel, others via default gateway. The Linux VPN should do a ...
1
vote
0answers
154 views

Is there a decent diagram of packet flow for a modern era (2.6+) iptables setup?

I'm currently trying to debug a particularly hairy set of DNAT based iptables rules (the UDP reply never makes it back to the original requester) and I'm struggling to visualise the packet flow ...
1
vote
0answers
151 views

How to provide “reverse ssh” to a shell?

Scenario: Many embedded devices (running Linux) out in the fields, behind routers so NAT'd and we can't make connections to them. We need for a support person to be able to initiate a terminal/shell ...
1
vote
0answers
426 views

How do you set up port-forwarding on a SwissCom Motorola Centro Grande?

I'm setting up a Minecraft server and the NAT forwarding on my router isn't working. This isn't the first time I'm doing this - I previously did this with an Apache server (used to run a server) and ...
1
vote
0answers
534 views

VMWare networking mode (NAT)

I've created a new WinXP vitual machine on my win7 using VMware player. This virtual machine is using NAT (10.0.0.0/24) and has a WAMP server running. I want this to be NAT as I want the server to be ...
1
vote
0answers
453 views

Mac OS X Lion - forward all connections on port 22 to external ip

I need to forward all connection to any address port 22 to a different gateway (i.e. no default). Firstly I suppose to do it with ipfw: sudo ipfw add 5 fwd $EXTERNAL_IP,22 tcp from any to any 22 ...
1
vote
0answers
137 views

peer to peer software vpn solutions?

Looking for a software based way to create a vpn for sales guys that will automatically reconnect if dropped (setup pptp dialin for moment but doesnt autoreconnect). I'm aware of Hamachi which is ...
1
vote
0answers
834 views

How can I port forward with an airport extreme and a NAT enabled modem?

I run an Actiontec HD701D modem with NAT to an Airport extreme base station to laptop etc. As you might expect I get double NAT issues. I tried a lot of different things to forward a port, but no ...
0
votes
0answers
10 views

Wireless router in “Client Bridge Mode” with roaming capabilities

Scenario: We are looking for a device which can connect wirelessly to a network and supports both NAT & Port-Forwarding AND is able to roam seamlessly between different APs. So far we have ...
0
votes
0answers
9 views

Remote SSH access doesn't work when OpenVPN client is enabled on DD-WRT

I have a DD-WRT router which I would like access remotely via SSH. The DD-WRT is behind an ADSL router which has port forwarding for port 22 enabled, DD-WRT SSH access and service are set to port 22, ...
0
votes
0answers
15 views

How can I tell if my NAT Gateway is a Full-Cone NAT (one-to-one) or a Restricted-Cone NAT?

Since a Restricted-Cone NAT blocks incoming packets from sources which I did not sent a packet to first, I feel as if it is more secure, unlike a Full-Cone NAT. However, I am not sure what my NAT ...
0
votes
0answers
18 views

Need clarification for Sonicwall “Public Server” wizard NAS policies

I used the SonicWall TZ105 "Public Server" wizard to add NAT policies for an internal (non-DMZ) server, but I do not understand the need for all the Custom policies that resulted: # Source ...
0
votes
0answers
33 views

vagrant guest connection problems

I have VirtualBox 4.3.22 on OSX 10 with guest additions installed In VirtualBox I have: Vagrant/CoreOS guest vm in NAT networking mode with eth1 addr 172.17.8.101 Ubuntu 14.04LTS guest vm in ...
0
votes
0answers
15 views

Iptables Port Forwarding To Different IPs Based on Port

On a CentOS 6 server with an IP address of 172.16.1.10, how can I configure iptables to route traffic destined for 172.16.1.10:80 to 192.168.1.10:80, and traffic destined for 172.16.1.10:8080 to ...
0
votes
0answers
22 views

What is wrong with this description of NAT as it relates to home networks?

I gave the following description of NAT address assignment as it relates to home networks as part of an answer on stackoverflow. For more details the full stackoverflow question is here ... Your ...
0
votes
0answers
31 views

Redirect traffic destined for IP and port

I have a program that wants to connect to 1.2.3.4 on port 5678, but it can't because the port is blocked on our network. However, I do have an SSH tunnel set up that redirects localhost:5678 to ...
0
votes
0answers
14 views

virtual network setup for NAT?

Trying to test NAT traversal for FTP. For that I need to setup 4 VMs with 2 interfaces each. I was thinking of creating a virtual network & testing on that. what are the virtual network simulation ...
0
votes
0answers
36 views

Mikrotik Netmap to Windows server 2008

I have Mikrotik RouterBoard RB2011UIAS-2HND-IN as my router and Windows Server 2008 as DC. I want users outside local network be able to connect our chat server placed on Windows Server. Chat server ...
0
votes
0answers
66 views

OpenVPN on Windows: clients don't see network behind server

I set up my openvpn server on Windows 7 pc. Client is connecting to server succesfully, so my port is forwarded to openvpn server. I'am able to ping 10.8.0.1 address from client. And that's all, but I ...
0
votes
0answers
144 views

ESXi + pfSense - NAT forward management interface ssh

question at the end. Situation: (ips replaced by fictive examples) I have a (remote) dedicated server, with 1 NIC, 2 IPs. One IP (eg. 5.9.1.1) is bound to the physical NIC's MAC, the other ...
0
votes
0answers
22 views

VBox NAT Network VPN

I wasn't quite sure whether to post this in a networking forum, or here, but I chose here since it is more software related rather than networking related. Basically, I want to be able to remotely VPN ...
0
votes
0answers
14 views

nope connected by filezilla, but cannot get list when connected by linux CLI client

I built FTP server by VSFTPD, on Raspberry pi, and Inside NAT. Surely set port-forwarding and, it perfectly functional when I connected by filezilla. But, I can't execute LIST(dir) when I connected to ...
0
votes
0answers
76 views

DNS config for NAT with BIND

Over the past days, i installed CentOS on a computer that I'm using to mess around with system admin related tasks. What im doing is, I'm basically making this computer into a "super router" as i like ...
0
votes
0answers
67 views

SSH Reverse tunnel assistance with application

Well it does in a way. If I do something like: ssh -R 27011:localhost:25566 USER@NAME.COM -p 27010 NOTE: substituting the real username and domain with USER@NAME.COM for security. NOTE: The port for ...
0
votes
0answers
64 views

Connections from virtual host to internet OK, but to rest of LAN, broken

In a notebook running Ubuntu 14.04 I have installed VirtualBox and created a virtual server with Windows 7. The PC is connected to a 192.168.x.y LAN. The virtual server is in a host-only network with ...
0
votes
0answers
30 views

Why is the TCP open but not the UDP?

I'm setting up a game server and I have a bunch of ports forwarded already (all in use). So I'm putting one into /etc/ppp/firewall-masq, which is full of iptables rules. The game server is served by a ...
0
votes
0answers
23 views

MASQUERADING a veth

I want to bind an application to a wifi interface that might loose connection and receive a new DHCPed IP on reconnect. The problem is that the application can only be binded to an IP address and not ...
0
votes
0answers
34 views

NAT on LAN interface

I have set up DDNS and it is working fine. The router is D-Link 2750U and I could not see any NATting option on the LAN interface. However, I wish to cut short the trip to the DDNS server when I am ...
0
votes
0answers
49 views

Are WAN Source rules checked after masquerading happens?

We are trying to do traffic shaping in pfSense, and we are having a hell of a time trying to convince pfSense to match the traffic. For example, if i create a WAN rule to log all traffic destined to ...
0
votes
0answers
113 views

Can only connect to uTorrent WebUI when on local network

My port forwarding is all set up, I can connect to WebUI hosted from my laptop with my phone but only with my LAN IP when I'm on the same network. When I try to use the public one (WAN), I can't get ...
0
votes
0answers
29 views

Special type of DMZ?

So I have a standard modem-router setup all great to go, my Modem gives an IP Address from my provider via DHCP according to my Mac address. All is good. However, I now want to expose a new virtual ...
0
votes
0answers
29 views

How to NAT one accesslist for two interface?

I have a 1800 cisco router with two interface. I Configured a dialar interface for pppoe connection for internet on fa 0/0. but I have an intranet for remote branch office on the same interface. the ...
0
votes
0answers
112 views

Using NAT to translate IP addresses on Mac OS X Mavericks

I want to access two iPhones (iOS 7.1) via USB tethering of the default iPhone hotspot. When I connect them to my iMac, they have the same static IP and can only be separated on the iMac because they ...
0
votes
0answers
41 views

Can't open NAT for mw2 with Wimax connection(PC & PS3)

I'm in contact with my ISP and we are struggling to get open NAT, (since is Wimax I think we can open NAT only on their backend) We've tried uPnP enabled, DMZ and opening ports on their backend, but I ...