The nvidia-quadro tag has no wiki summary.
4
votes
1answer
85 views
+50
Can I “un-blurryfy” or “un-smallify” my laptop display in a 3-monitor configuration?
I have a 3-monitor setup: a Dell Precision M4700 (max resolution 1920x1080) and two Dell P2210 monitors (resolutions 1680x1050). I'm running my external monitors at their native resolutions, but ...
0
votes
1answer
54 views
Can you use quadro drivers on a Geforce card (500 or 600 series)?
I remember reading about these 4-5 years ago, but not sure if they are still doing it. Is this possible nowadays? Basically running a GTX like a Quadro? I don't know much about hardware, but some ...
0
votes
0answers
134 views
Lenovo W530 - NVIDIA Quatro K1000M - Windows has stopped this device
I'm not sure why, but Windows has now decided to mark my video card with:
Windows has stopped this device because it has reported problems. (Code 43)
I've tried uninstalling the driver and ...
0
votes
0answers
103 views
HP - monitor suddenly turn to sleep, DVI port show no signal
I'm currently using a HP Z400 Workstation with 3D nvidia quadro 600 graphics. However,recently I have been encountering the problem that either the CPU restart out of sudden, the monitor suddenly show ...
4
votes
5answers
409 views
HP Z210 SFF: two different video cards produce no Displayport output when installed
I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal ...
3
votes
3answers
4k views
nVidia Driver keep crashing on Windows 8 [closed]
I have a little problem for about 2-3 weeks now. My nVidia driver crash. The screen comes blank, then one monitor works, the other one no. They flicker, my computer run a lot, like if it was writing ...
2
votes
1answer
1k views
Win 7 dual monitor: Don't move application windows when turn off second monitor
The title is correct, it should say "Don't" not "Doesn't". I Don't want the application windows to be moved to the main monitor when I turn off the monitors.
On my Win XP dual monitor system, I can ...
1
vote
0answers
146 views
Different window managers appearing on different X displays
I'm running Linux Mint 13 with three monitors. The graphics card is an nVidia Quadro NVS 450. Two of the monitors are joined together as TwinView, the other is a "separate X display". Everything ...
1
vote
0answers
338 views
nVidia Quadro 600 - Dual-Link DVI bad detection
I just got by new NVidia Quadro 600 PCI-e with a dual-link DVI-I and I got a small problem when I try to install my second monitor using a DVI to DVI+VGA adapter... The VGA monitor is working very ...
1
vote
0answers
678 views
nVidia Quadro 600 on Debian (stable) Twinview
I want to run Debian stable on a 64-Bit (amd64) system and enable twinview on the graphics boaard nVidia Quadro 600.
The default installed driver works for one screen. After installing the nvidia* ...
0
votes
1answer
693 views
cannot correct color on external monitor
External monitor color is different from internal display.
I have a Lenovo W520, 4270CTO, built July 8th, 2011, Win7 Pro, i7-2720QM CPU @ 2.20GHZ. 8GB DDR3-SDRAM (1333MHz) Samsung memory, laptop ...
1
vote
2answers
663 views
EliteBook 8540w suffers BSoD whenever power or monitors are unplugged
I have a HP EliteBook 8540w with an Nvidia Quadro FX 1800M video card. Every time I unplug an external monitor or the power, it gets a Blue Screen of Death. Are there some drivers I should update? Is ...
0
votes
0answers
356 views
Best card for a quad monitor setup on ubuntu [closed]
I know this question has been asked before, I am looking to setup a 4 monitor system running ubuntu for 3D rendering, ideally on each display independently. What is the best card for doing so? My ...
1
vote
0answers
730 views
nvidia quadro nvs 420 with three monitors
I have a dell pc with an nvidia quadro nvs 420 video card. I am currently running 2 monitors off the video card - a dell 24inch widescreen and a dell 19inch. The 24inch connects directly through an ...
2
votes
3answers
488 views
Quadro FX 3800 fan goes crazy on bootup
I have a Quadro FX 3800 whose fan goes to max speed when the computer is turned on, and it's extremely loud. It only settles down when Windows boots up and loads the driver for it.
Is this normal ...
1
vote
1answer
304 views
How to set up dual quadro cards on RHEL 5.5?
I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card.
After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL ...
0
votes
3answers
636 views
Can I install another video card so that I can attach a 3rd monitor?
I work in mechanical design and need several monitors to work with CAD and related. The system I'm currently using is a bit outdated, but still gets the job done fine:
Xeon 5130 dual core
4GB RAM
...
0
votes
3answers
2k views
Only two monitor ports are detected on nVidia Quadro NVS 450
I have an nVidia Quadro NVS 450 installed in a Dell Optiron 380. Only DisplayPort #1 and DisplayPort #4 are detected by windows. The machine has a BIOS setting to automatically choose the primary ...
1
vote
1answer
2k views
Will a Fermi Quadro graphics card support three independent monitors?
I am interested in purchasing a Quadro 2000 graphics card, however, I know that the GeForce series will only do two monitors / card. But the Quadro cards have DisplayPort, which is a far easier signal ...
4
votes
3answers
3k views
Can I run both a Quadro and GeForce video card at the same time?
I'd like to use a Quadro video card for some professional applications that I use, but I also like to play games, which would be better suited on a GeForce.
Can I simply put 1 of each of these cards ...
