0
votes
0answers
4 views

Can’t ping gateway on a Tomato OpenVPN server setup

I have some problem configuring an Open VPN server from a tomato firmware (v1.28.9054 MIPSR2-beta K26 USB vpn3.6) on a WNR3500L router. I’ve setup the server like that : And, when connecting ...
0
votes
0answers
50 views

How to use OpenVPN on Whonix Workstation?

I've checked the documentation and googled it like a mad man. It's supposedly straight-forward as it should just go through the gateway with no problems. But I am getting one error after another with ...
0
votes
1answer
55 views

Routing Traffic With OpenVPN

Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: ...
0
votes
1answer
82 views

Iptables mark incoming packet - vpn routing

I have connected my home to my workplace for out of house backup reasons through OpenVPN. The connection is working nicely. At work I have 5 fixed IP addresses. Now I would like to assign one of ...
0
votes
0answers
75 views

using NFS over unreliable networks (wifi/mobile)

I have a NFS server at home (and an openvpn connection that only works outside of home). My phone (Jolla) is basically Linux, and has mobile data/wifi/usb network capability. Basically, I want to ...
0
votes
2answers
50 views

Routing table with openvpn over an unstable wireless network

I'm connected to the Internet via a campus network: IP range is, let's say 10.42.0.0/16 and everything has to go through a proxy server 10.42.0.42. I'm sometimes connected to this network via a ...
1
vote
1answer
74 views

Combination of NAT, DHCP, and OpenVPN on lubuntu 14.04

Okay, so I've got a set up, where eth0 my internal IP address (192.168.1.3) it has been configured as my default gateway using the iptables this sudo sysctl -w net.ipv4.ip_forward=1 sudo ...
0
votes
0answers
16 views

Openvpn fails after update

no changes (other than verb 9) in the config and cat $keys/$certs shows all of the keys and certs in tact. May 26 05:01:07 router1 openvpn[31969]: auth_user_pass_verify_script_via_file ...
1
vote
1answer
41 views

Debian OpenVPN listen on eth0?

I have a Debian 7 machine with an OpenVPN client and several services. The OpenVPN client does work as intended and all outgoing traffic from the Debian machine flows over the VPN connection (tun0). ...
0
votes
1answer
57 views

Why is change to iptables not taking effect?

Im trying to setup OpenVPN to use Tor as a proxy in Liberte. When I run openvpn as root, I get the following response: Tue May 13 15:15:18 2014 Attempting to establish TCP connection with ...
0
votes
1answer
224 views

Error to install openvpn on debian

I'm on Debian 7 and I had an error to install openvpn: aurelien@ns22895:~$ sudo apt-get install openvpn [sudo] password for aurelien: Reading package lists... Done Building dependency tree ...
2
votes
2answers
57 views

Checking if VPN is working correctly

How to make sure, that all traffic (e.g. from web browser) is passing through VPN and no data is leaking through normal internet interface? Or how to check, what interface (VPN or other) is used by ...
0
votes
0answers
154 views

Shrew Soft VPN Client 2.2.1 + how to configure user.c file for checkpoint VPN

I download the latest VPN client - ike-2.2.1-release From https://www.shrew.net/download/ike I need to install this VPN on my linux red-hat machine – version 6.3 I read that shrew VPN ...
0
votes
0answers
21 views

how to import OPENVPN crttificate in Debian and Fedora latest?

how to import OPENVPN **crttificate in Debian and Fedora latest ??** I tried installing openvpn in Debian setting and reboot even in root with admin access but still cant see option to import ...
1
vote
1answer
181 views

How can I translate these openvpn client configuration instructions to work with Fedora 20?

Here's the link to the full instructions. When I get to step 9, under the heading "9. Setup Client Config Files", it says: Now we will configure the openVPN to work as client. Remember that we ...
1
vote
1answer
158 views

OpenVPN on Ubuntu Linux, connection established, how to send data through vpn?

I installed OpenVPN on my Ubuntu machines (both client and server are Ubuntu machines). Its a fresh Ubuntu installation (13.10). I wrote some config files, for client and server: server.conf: (my ...
0
votes
1answer
382 views

Tunnel specific traffic through OpenVPN

I have Ubuntu Server, and I would like to filter traffic and have only a specific users or groups traffic be sent through the VPN, and the rest of the traffic sent through the standard internet ...
1
vote
2answers
445 views

OpenVPN - Connects but no internet on Linux, works perfectly on Windows

I have set up an Amazon EC2 server with OpenVPN configured. I can connect using a windows machine and everything works as expected - internet traffic is all routed through the VPN. With the Ubuntu ...
1
vote
0answers
372 views

Tunneling traffic through OpenVPN

Following the steps described here I've managed to configure both the VPN server and client(I can ping both ways). Their respective configuration files are: server: ;local a.b.c.d port 1194 ;proto ...
3
votes
2answers
333 views

Is it possible to have 2 different VPN connections simultaneously on the same machine? maybe on different network interfaces?

I am setting up a new cluster in my new workplace, and I am still administering another cluster in my last work place. Basically I am "copying" the configuration of the first one to setup the new one. ...
0
votes
1answer
171 views

How do I block every connection except vpn and ssh without endangering the state of my vps?

I have some vps space but I get alot of scans based on what I see in iftop. I tried some iptables stuff but it gets tiring and useless to put all the ips that I see in the logs. I am wondering about ...
0
votes
1answer
54 views

Remote IP on a local device

What I want to achieve is to be able to have one of the IP addresses from a remote server on a local server (raspberry pi). Right now the network map would look like this: RPi (192.168.0.42) ---> ...
0
votes
1answer
109 views

How to add Openvpn clients without the original rsa folder?

I have a working openvpn server, however I need to add a new client to my pool. The problem is that I do not seem to have the original rsa folder that was created when I was setting it up the first ...
0
votes
1answer
113 views

OpenVPN server does not provide access to internet

I am able to connect to my newly installed OpenVPN server (Debian 6.0 VPS using OpenVZ). When connected with the windows client, I am not able to access the internet. net.ipv4.ip_forward and iptables ...
0
votes
1answer
911 views

OpenVPN on Debian 6 failed to start

I configured openvpn on my Deabian 6 VPS (using OpenVZ) several times but always stuck on "Starting virtual private network daemon: client server failed!" The syslog indicates, that there seems to be ...
0
votes
0answers
40 views

VPN across three VPS's

I have three servers running on virtual machines. The gateway is 192.168.0.1, and the hosts are the numbers 2,3 and 4. The first host is serving a PHP script which outputs the visitor IP ...
1
vote
2answers
291 views

Script in if-up.d appears to be running 3 times. Only want it to run once

I have a script in /etc/network/if-up.d to connect to my VPN on startup. It appears that the script is running three times and therefore connecting to my VPN three times. After startup, looking at ...
1
vote
1answer
403 views

Routing traffic of wlan1 through vpn and traffic of wlan0 to eth0

I am trying to setup a wireless router and make use of a vpn. As I am fairly new to this secific topic. I hope somebody here can give me a hint or if possible a practical solution. I have searched the ...
0
votes
3answers
297 views

Route Internet from eth0 to openvpn to eth1

I need to route all traffic coming and going from/to eth0 through openVPN before I send/receive it to/from eth1, this is a virtual machine Debian, you can call it a virtual router. The idea is to put ...
2
votes
1answer
180 views

Firewall is blocking internet traffic to OpenVPN clients

I have a virtual network setup with a Linux router/firewall connected to two private networks. An OpenVPN server in routing mode and a web server are in one of the networks. On the other are linux ...
0
votes
1answer
208 views

My client can't ping to server tunnel and no internet connectivity

I have installed OpenVPN in my Centos machine as OpenVPN server. I generated all authentication certificates, keys and all and it worked fine through the key authentication system. I tested it with my ...
1
vote
1answer
86 views

Allow access to OpenVPN only from linux systems?

I'd like to know if there's a way to check the OS of the client connecting to a client to site VPN tunnel ending in an OpenVPN Linux server. I don't want Windows clients to connect to it due to ...
1
vote
0answers
80 views

Why/how is OpenVPN tinkering with my BIND9 configuration?

I have a DNS server that lacks forwarders. Its only aim is to resolve machines on my internal domain. As such, dig/ping somevaliddomain.com returns nothing. This is the behavior I want. When I ...
1
vote
1answer
1k views

Connect OpenVPN client through Tor's SOCKS port (Linux)

OpenVPN has the option to connect through a socks proxy. Tor, as you may know, provides a SOCKS proxy (listening on localhost) to anonymize the apps/traffic using it. I would like to connect my ...
1
vote
1answer
554 views

How to keep alive the VPN connection?

I'm using NetworkManager and OpenVPN on linux. The problem is I get random disconnections, especially when idle. So I was thinking maybe there was an option to keep it alive. I have seen examples ...
1
vote
0answers
2k views

OpenVPN Bridging Woes (Can't Ping Server From Client)

Here is my problem: I am trying to set up OpenVPN on my home network, to use as a secure tunnel for traffic from insecure networks when away from home, and also to access machines on my home LAN. ...
2
votes
1answer
736 views

Openvpn through socks proxy on linux

I hope this is the correct place to post this. Basically i'm trying to run vpn through a socks proxy. Now this works fine in Windows 7 for me but when i try it in Linux it fails with Code: Mon Jun ...
1
vote
0answers
315 views

local routing with openvpn : ping: sendmsg: Operation not permitted

I set up a simple vpn with IP 10.0.0.1 using openvpn --mktun --dev tun1 ip link set tun1 up ip addr add 10.0.0.2/24 dev tun1 and I run a simpletun program on two machines which is ...
0
votes
1answer
1k views

Split tunnel routing a specific port over OpenVPN on Ubuntu Server 12.04

So I know there is another question on here that I used as a guide as it was super helpful! (Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443) Only my goal is a ...
0
votes
1answer
182 views

Connecting to openvpn server from linux command line

I'm trying to setup openvpn client on Debian Linux so my traffic goes through he vpn. I have done a lot of Googling and in all the articles I crossed it mentions that I need to copy the certificate ...
0
votes
0answers
171 views

openvpn interface, local routing and linux kernel routing table

from this article: http://backreference.org/2010/03/26/tuntap-interface-tutorial/ the author created a tun interface # openvpn --mktun --dev tun2 # ip link set tun2 up # ip addr add 10.0.0.1/24 dev ...
1
vote
1answer
1k views

openvpn usage: how to modify ip address and how to remove a tun interface?

I used openvpn to create a tun interface on linux openvpn --mktun --dev tun2 ip link set tun2 up ip addr add 10.0.0.2/24 dev tun2 now I want to modify the ip address to 10.0.0.1/16, how to do it? ...
0
votes
1answer
898 views

Accessing DLNA over VPN [duplicate]

I have set up a VPN server using OpenVPN on my home Ubuntu 10 box as a means to access my home network drives and media drives whilst at work and on the move. I get a valid connection, can ping and ...
0
votes
1answer
87 views

OpenVPN configuration

Preamble: I am lucky to have an IP subnet which has real IPs, so no NAT. I have a network from 1.2.3.0 to 1.2.3.128. I have a Debian server with an eth0 interface say 1.2.4.9. Now I want to have an ...
2
votes
2answers
321 views

How to send out some traffic via my vpn connection

I had a working setup where I could access all my work resources which are accessed via VPN going via my server previously however at some point recently this stopped working for no obvious reason. ...
0
votes
2answers
257 views

OpenVPN which linux works best with

I have had problems using OpenVPN on Ubuntu 11.04. I am not able to connect at all. I see there are some outstanding bugs related to this that also affect 12.04. Can anyone recommend a different ...
1
vote
1answer
570 views

What routes must be set (in Linux) to allow Internet access through given interface without setting it default?

I am trying to solve a task with routing and OpenVPN's configuration. After setting the connection, I don't want it to become defaut route to anything, but rather want to use its interface for this ...
0
votes
1answer
3k views

How to autostart OpenVPN (client) on Ubuntu 12.04 CLI?

I have an *.ovpn file that works if I type in: sudo openvpn filename.ovpn. Now I would like to start up OpenVPN when I boot the computer. It's a headless version of Ubuntu 12.04 64-bit if that ...
3
votes
1answer
2k views

Load balancing with multiple gateways

I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The ...
1
vote
0answers
210 views

Port forwarding & OpenVPN

I have a raspberry pi running Debian (raspbian) and I'm having issues that don't seem raspberry pi related. I connect to this device via ssh most of the time on my local network, but decided I would ...