0
votes
1answer
21 views

How to route openvpn-server traffic over the vpn itself

So I have a server with the public ip address of 101.102.103.104 (for example). This server is running an openvpn server, plus a bunch of other stuff that is listening on the public ip network device ...
0
votes
1answer
35 views

OpenVPN service fails to start

I am trying to set up a VPN server on a Raspberry Pi, however, I get an error [FAIL] Starting virtual private network daemon: server failed! I have followed a few different tutorials, but none of ...
0
votes
0answers
7 views

Zyxel Keenetic Lite Rev B, OPEN VPN client

I have Zyxel Keenetic Lite. I have 2 PC(standalone and laptop) at home, from where I need to work remotely. PC INTERNET works via cable, laptop works via WiFi. On both of PC I have to use OPENVPN (2 ...
0
votes
1answer
28 views

OpenVpn Service is connected but no ip change

First let me start with that yes it is run as an administrator here is the route print The problem is that the open vpn client says it is connected and it shows it has an assigned IP but ...
0
votes
0answers
29 views

How to use OpenVPN on Whonix Workstation?

I've checked the documentation and googled it like a mad man. It's supposedly straight-forward as it should just go through the gateway with no problems. But I am getting one error after another with ...
0
votes
0answers
27 views

Don't retry vpn connection after tls-error

I have several cellular devices which establish always-on openvpn tunnels to a server which is always listening for incoming openvpn connection requests. Sometimes the cellular devices are delivered ...
0
votes
1answer
26 views

How to configure VPN connection to be more tolerant of network latency?

I need to connect to a private network at my university using an OpenVPN connection. We are currently using such a connection successfully in most cases. However, I often need to connect via HughesNet ...
1
vote
1answer
24 views

Router based VPN through single Ethernet port or easy on/off

I've recently moved out of the USA. Before my move I signed up for a VPN service. I've been searching for a way to enable network-level VPN for all my devices through my router. It seem easy enough ...
0
votes
1answer
39 views

OpenVPN not sending traffic to internet?

I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am ...
0
votes
1answer
40 views

Routing Traffic With OpenVPN

Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: ...
0
votes
0answers
15 views

Openvpn fails after update

no changes (other than verb 9) in the config and cat $keys/$certs shows all of the keys and certs in tact. May 26 05:01:07 router1 openvpn[31969]: auth_user_pass_verify_script_via_file ...
1
vote
1answer
38 views

Debian OpenVPN listen on eth0?

I have a Debian 7 machine with an OpenVPN client and several services. The OpenVPN client does work as intended and all outgoing traffic from the Debian machine flows over the VPN connection (tun0). ...
0
votes
4answers
53 views

OpenVPN + unbound DNS: simultaneous usage possible on same machine?

I am trying to run a OpenVPN tun server that listens to port 53 on UDP. I also am running unbound DNS on the same machine to provide DNS and filtering to the VPN and the machine itself. I am unable ...
0
votes
0answers
88 views

Why is traffic not going through OpenVPN on Liberte (Tor)?

I am working on a 'Liberte Linux > OpenVPN > Tor > VPN server > Internet' and have hit a brickwall. OpenVPN appears to connect to the VPN server succesfully using TOr as a SOCKS proxy. But after ...
0
votes
1answer
44 views

Why is change to iptables not taking effect?

Im trying to setup OpenVPN to use Tor as a proxy in Liberte. When I run openvpn as root, I get the following response: Tue May 13 15:15:18 2014 Attempting to establish TCP connection with ...
0
votes
0answers
76 views

how to limit multiple login in softether vpn server for openvpn clients?

I have a softether vpn server.for all account of a group, I want to limit multiple login to 1 user per account I have set the group's security policy like this : "maximum number of multiple logins ...
0
votes
1answer
56 views

OpenVPN: connected, but traffic still via normal route

I have installed Openvpn on a Debian server, and tried to connect my Android phone to the VPN. The connection works, but when I open whatismyip.com in the phone browser, it still returns my normal IP ...
0
votes
1answer
193 views

Error to install openvpn on debian

I'm on Debian 7 and I had an error to install openvpn: aurelien@ns22895:~$ sudo apt-get install openvpn [sudo] password for aurelien: Reading package lists... Done Building dependency tree ...
0
votes
1answer
22 views

Any way to set up multiple independent VPNs with OpenVPN?

Looking to find some way to set up multiple VPNs under a single OpenVPN Server, where external clients can only connect to other devices in the same network/group. Open VPN Server (host) VPN ...
2
votes
0answers
37 views

OpenVPN client can't reach a box on server's LAN

I can't seem to figure this out. The server runs on a VPS with private networking. I need to reach another VPS on the same datacenter from the client via the OpenVPN server. The server's LAN IP is ...
0
votes
0answers
35 views

OpenVPN Server & Two Gateways

I have a network setup as follows: The firewall allows incoming connections for the VPN server on OpenVPN ports and all outgoing connections from the NAT. It is stateful, even for UDP "connections" ...
2
votes
2answers
50 views

Checking if VPN is working correctly

How to make sure, that all traffic (e.g. from web browser) is passing through VPN and no data is leaking through normal internet interface? Or how to check, what interface (VPN or other) is used by ...
0
votes
0answers
62 views

can't vnc to a machine connected through openvpn

I am trying to set up a gaming vpn with OpenVPN and although the connection succeeds and we can see network shares, the broadcast packets don't go through the vpn connection. Both the client and ...
0
votes
0answers
95 views

openvpn client can't connect to server over the internet but it works over lan (server ports forwarded)

I set up an OpenVPN server and client configuration files for gaming and the client is able to connect to the server over the same LAN, but when I try to connect the client to the server over the ...
0
votes
0answers
131 views

Shrew Soft VPN Client 2.2.1 + how to configure user.c file for checkpoint VPN

I download the latest VPN client - ike-2.2.1-release From https://www.shrew.net/download/ike I need to install this VPN on my linux red-hat machine – version 6.3 I read that shrew VPN ...
1
vote
0answers
56 views

Bridging my VM with an OpenVPN adapter

Beginner user here,I start to slowly learn about networks, virtual machines and so. Here is my set up. I have a host system, running Windows 8.1. On my host system is installed OpenVPN, with a ...
1
vote
1answer
31 views

How to set up Linux VPN server and connect from a Mac?

I am trying to set up my own VPN server on a Linux box which I would connect to from my Mac, and I am having trouble figuring out which is the best and easiest(recommended) way to do that. Which VPN ...
0
votes
1answer
192 views

Route internet traffic from openvpn tun0 to eth0

I can't figure it out. How do I give chosen VPN-users access to internet trough eth0? All server traffic goes trough eth1. The eth0 is only supposed to give VPN-users internet access on chosen ports ...
0
votes
0answers
67 views

How to auto login with OpenVPN

OpenVPN v5. ask about password in every connection try, so I want to automate this process. I created file password.txt with username/password and added line auth-user-pass password.txt to .ovpn ...
0
votes
0answers
45 views

OpenWRT: Share openvpn connection with network

I want to tunnel all the traffic of my network through an openvpn connection running on my openwrt router.. Openvon is installed on the OpenWRT router. It is possible to connect to the openvpn server ...
1
vote
0answers
7 views

Online collaborative team, connecting to 1 or more servers

I have a team of partners working from different locations in the world. We all are connecting to our own VPS, as well as to a bunch of customers websites via http and ftp to other shared or vps ...
0
votes
1answer
31 views

Client config for private openvpn server

I installed openvpn server on a local Ubuntu server at home. I want to use this to connect to in situations where I have to use public wifi. The server setup is done. I followed the Ubuntu guide, and ...
2
votes
0answers
107 views

VPN DNS Configuration bug in OS X

I am using TunnelBlick to connect to an VPN (OpenVPN) with OS X 10.9.2. I can authenticate and pass traffic but the DNS entries injected from the VPN do not work. Here is the output of scutil --dns ...
1
vote
0answers
61 views

VPN access kvm guests

OpenVPN is installed on my host system running kvm as virtualization and I've several guests with static/public (Bridged) and private IPs (NAT), every guest uses Samba to share some folders. how can ...
1
vote
1answer
148 views

How can I translate these openvpn client configuration instructions to work with Fedora 20?

Here's the link to the full instructions. When I get to step 9, under the heading "9. Setup Client Config Files", it says: Now we will configure the openVPN to work as client. Remember that we ...
1
vote
2answers
112 views

Restrict internet access through VPN/SSH tunnel to prevent leaking non-tunneled data (No router)

Pretty simple use case. Let's say I use various applications, and at no such time can any of these applications ever transmit data natively from my actual connection. Here's my actual problem in more ...
1
vote
1answer
52 views

OpenVPN setup using only .openvpn and .key

I have a tunnel purchased from PRQ.se, previsouly I've been running it on Windows Server 2003 but I've moved on to Windows Server 2012 R2 this week. The OpenVPN program that PRQ recommends from ...
0
votes
1answer
73 views

VPN on, can't connect from outside world

I'm looking for help to configure my Synology. I can't ssh it from outside when the VPN is connected. Everything is fine when deconnected. I'm using openvpn with privateinternetaccess. I want to ...
0
votes
2answers
136 views

OpenVPN encryption and authorization issues

I have configured my OpenVPN server and client by reading various tutorials. The configuration I'm using currently is the following: For the server: port 1194 proto tcp dev tun ca ca.crt cert ...
0
votes
0answers
66 views

How can one connect to a VPNGate VPN using a fedora system?

VPNGate is an academic project aiming to provide free VPN access to the public. The link is here: http://vpngate.net Unfortunately, they only provide a client for windows. Let's get some linux ...
0
votes
0answers
77 views

VPN no longer working after System Update

I recently Updated Linux Mint (13) - I didn't upgrade the distro, but it seems that I updated network-manager. After a restart (that was required), the VPN (openvpn) connection stopped working. I ...
0
votes
0answers
29 views

What can Pagekite do that Apache+VPN can't do?

I run a web server at home behind a firewall. I understand that if I ran pagekite on the home web server, and on some public machine (e.g. on Amazon), I could point DNS to the Amazon server, and have ...
-1
votes
1answer
68 views

Sample (working) configuration for openvpn in AWS

I've been trying to set up openvpn on AWS EC2 instance and I'm having lots of trouble with that... I followed the guide on ubuntu help center but it either blocks all connections or doesn't work ...
1
vote
0answers
83 views

How to configure VPN traffic over certain ports only - Windows

I would like to force only certain ports through my VPN (or open only certain ports from my VPN, which ever is easier). I am on windows, and the VPN service has options for OpenVPN, SSTP, L2TP/PPTP. ...
0
votes
1answer
140 views

Solution for automatic VPN-Connection on Ubuntu 13.10

I am searching since ages for a solution to connect to VPN-Servers automatically in my Ubuntu 13.10. It should connect on startup and reconnect on connection-drop. I tried several things: ...
0
votes
1answer
1k views

Multiple OpenVPN connections from one client to one server - connection reset

I have a Ubuntu 13.10 OpenVPN client, and Windows XP OpenVPN server. Connection is established, everything works fine (actually Im testing it on two virtual machines). My question is simple: can I ...
1
vote
1answer
145 views

OpenVPN on Ubuntu Linux, connection established, how to send data through vpn?

I installed OpenVPN on my Ubuntu machines (both client and server are Ubuntu machines). Its a fresh Ubuntu installation (13.10). I wrote some config files, for client and server: server.conf: (my ...
0
votes
1answer
28 views

OpenVPN and advertising FQDN

Is there a config available for openVPN to advertise FQDN over the VPN connection. At my house, I don't have my own DNS server. Just know that after a few minutes on my lan, arp -a gives me a ...
0
votes
0answers
68 views

OpenVPN DHCP server issue

I've worked through the tutorial listed at http://www.dd-wrt.com/wiki/index.php/VPN_(the_easy_way)_v24%2B. I have dd-wrt running on my router with the OpenVPN server daemon running. I'm running in ...
1
vote
0answers
31 views

OpenVPN to bridged wifi

I have a OpenVPN vpn server running on my Linksys/Tomato router. I can connect to all machines on my home network just fine, except for the following. I have several machines in another part of the ...