Tagged Questions

OpenVPN is a free and open source software SSL VPN solution. It allows secure point-to-point or site-to-site connections with routed or bridged configurations and remote access facilities.

learn more… | top users | synonyms

0
votes
2answers
160 views

Routing table with openvpn over an unstable wireless network

I'm connected to the Internet via a campus network: IP range is, let's say 10.42.0.0/16 and everything has to go through a proxy server 10.42.0.42. I'm sometimes connected to this network via a ...
1
vote
1answer
299 views

Combination of NAT, DHCP, and OpenVPN on lubuntu 14.04

Okay, so I've got a set up, where eth0 my internal IP address (192.168.1.3) it has been configured as my default gateway using the iptables this sudo sysctl -w net.ipv4.ip_forward=1 sudo ...
0
votes
0answers
85 views

Link Raspberry Pi OpenVPN Server and OVPN Gateway Devices

I have an OpenVPN server that accepts incoming VPN connections at 192.168.1.4. I also have a Raspberry Pi at 192.168.1.3 that acts as a passthrough gateway to an external VPN. When I VPN into the ...
0
votes
0answers
25 views

Openvpn fails after update

no changes (other than verb 9) in the config and cat $keys/$certs shows all of the keys and certs in tact. May 26 05:01:07 router1 openvpn[31969]: auth_user_pass_verify_script_via_file ...
1
vote
1answer
71 views

openvpn with ubuntu server 12.04

ERROR: Linux route delete command failed: could not execute external program When command: sudo openvpn server.conf Would anyone have a solution to this problem? My server.conf folder: serveur ...
0
votes
1answer
1k views

minidlna + OpenVPN = Can't see DLNA server on VPN

I've got OpenVPN (tunnel, not bridged) and minidlna servers running on my Ubuntu 14.04 PC. Each one works individually (as in the VPN works, I can connect and browse samba shares and internet traffic ...
1
vote
1answer
7k views

openvpn connected, but not routing. (ping test fails)

I am setting up a VPN connection for the first time. I am working on a project in which i would like to access my LAN at my home from the outside world. So, I installed OpenVPN2.2.2 on my 32-bit ...
1
vote
1answer
82 views

Debian OpenVPN listen on eth0?

I have a Debian 7 machine with an OpenVPN client and several services. The OpenVPN client does work as intended and all outgoing traffic from the Debian machine flows over the VPN connection (tun0). ...
0
votes
4answers
113 views

OpenVPN + unbound DNS: simultaneous usage possible on same machine?

I am trying to run a OpenVPN tun server that listens to port 53 on UDP. I also am running unbound DNS on the same machine to provide DNS and filtering to the VPN and the machine itself. I am unable ...
0
votes
0answers
185 views

Why is traffic not going through OpenVPN on Liberte (Tor)?

I am working on a 'Liberte Linux > OpenVPN > Tor > VPN server > Internet' and have hit a brickwall. OpenVPN appears to connect to the VPN server succesfully using TOr as a SOCKS proxy. But after ...
0
votes
1answer
141 views

Why is change to iptables not taking effect?

Im trying to setup OpenVPN to use Tor as a proxy in Liberte. When I run openvpn as root, I get the following response: Tue May 13 15:15:18 2014 Attempting to establish TCP connection with ...
0
votes
0answers
21 views

OpenVPN access server on Red Hat on Parallel on Mac Mini server

installed Red Hat on parallel on Mac Mini server to use Red Hat as a personal OpenVPN installed the OpenVPN access server than used terminal for setup but every time i get internal ip not the ...
0
votes
0answers
201 views

how to limit multiple login in softether vpn server for openvpn clients?

I have a softether vpn server.for all account of a group, I want to limit multiple login to 1 user per account I have set the group's security policy like this : "maximum number of multiple logins ...
0
votes
1answer
122 views

OpenVPN: connected, but traffic still via normal route

I have installed Openvpn on a Debian server, and tried to connect my Android phone to the VPN. The connection works, but when I open whatismyip.com in the phone browser, it still returns my normal IP ...
1
vote
0answers
180 views

squid blocking access to http and https by IP, but not by domain

I've been succesfully using openvpn from my Windows 7 laptop whilst connecting to public wifi networks but have come across one network where I can not access the openvpn server as access to any and ...
0
votes
1answer
426 views

Error to install openvpn on debian

I'm on Debian 7 and I had an error to install openvpn: aurelien@ns22895:~$ sudo apt-get install openvpn [sudo] password for aurelien: Reading package lists... Done Building dependency tree ...
0
votes
1answer
28 views

how to setup browsing via OpenVPN?

I've setup OpenVPN and connected to the server; the tray icon shows everything is fine. However, my browser still doesn't use VPN. It shows my real IP, when I check it via a website. How can I make my ...
0
votes
0answers
25 views

troubleshooting OpenVPN not connecting to the server

I've installed OpenVPN GUI for Windows, created and put config file to the appropriate folder. When I'm pressing "Connect", it shows a progress window (without any messages) and after a few seconds - ...
0
votes
1answer
31 views

Any way to set up multiple independent VPNs with OpenVPN?

Looking to find some way to set up multiple VPNs under a single OpenVPN Server, where external clients can only connect to other devices in the same network/group. Open VPN Server (host) VPN ...
2
votes
0answers
72 views

OpenVPN client can't reach a box on server's LAN

I can't seem to figure this out. The server runs on a VPS with private networking. I need to reach another VPS on the same datacenter from the client via the OpenVPN server. The server's LAN IP is ...
0
votes
1answer
74 views

Openvpn to stream media to Android

If I set up an openvpn rig like this, could I use the official openvpn app (or anything, I don't care as long as it's free) to stream videos from the home PC to my Android device when I'm away from ...
0
votes
0answers
89 views

Zeroshell + Vyprvpn Openvpn: How to import the Vyprvpn cert without a key?

i am trying to get my Vyprvpn Openvpn Account working in Zeroshell. However since i have only the cert and no key i am unable to import the certificate. If i could import the cert i suppose i only ...
0
votes
0answers
35 views

how to easily configure openvpn with bridged interface?

I have two PC(Ubuntu 12.04 lts) both residing in two different local lan network both having private IPs. I have searched the web, read many website contents but was unable to setup openvpn properly. ...
0
votes
0answers
99 views

OpenVPN Server & Two Gateways

I have a network setup as follows: The firewall allows incoming connections for the VPN server on OpenVPN ports and all outgoing connections from the NAT. It is stateful, even for UDP "connections" ...
1
vote
0answers
180 views

Windows 7 not using VPN DNS Server

I'm connecting to my company VPN using OpenVPN. My VPN network is 192.168.32.x and it resolves to the company network which uses 10.0.x.x. My home network users 192.168.1.x. When I connect, Open ...
2
votes
2answers
134 views

Checking if VPN is working correctly

How to make sure, that all traffic (e.g. from web browser) is passing through VPN and no data is leaking through normal internet interface? Or how to check, what interface (VPN or other) is used by ...
1
vote
0answers
146 views

can't vnc to a machine connected through openvpn

I am trying to set up a gaming vpn with OpenVPN and although the connection succeeds and we can see network shares, the broadcast packets don't go through the vpn connection. Both the client and ...
0
votes
0answers
387 views

openvpn client can't connect to server over the internet but it works over lan (server ports forwarded)

I set up an OpenVPN server and client configuration files for gaming and the client is able to connect to the server over the same LAN, but when I try to connect the client to the server over the ...
0
votes
0answers
347 views

Shrew Soft VPN Client 2.2.1 + how to configure user.c file for checkpoint VPN

I download the latest VPN client - ike-2.2.1-release From https://www.shrew.net/download/ike I need to install this VPN on my linux red-hat machine – version 6.3 I read that shrew VPN ...
1
vote
0answers
291 views

Bridging my VM with an OpenVPN adapter

Beginner user here,I start to slowly learn about networks, virtual machines and so. Here is my set up. I have a host system, running Windows 8.1. On my host system is installed OpenVPN, with a ...
0
votes
1answer
70 views

How to specify a certain device to access the Internet via the OpenVPN client of router?

Involved Devices: a VPS, a router, and several devices that connected to the router. Final Aim: Base on the OpenVPN client which has connected to the server on the VPS, specify only one local device ...
1
vote
1answer
88 views

How to set up Linux VPN server and connect from a Mac?

I am trying to set up my own VPN server on a Linux box which I would connect to from my Mac, and I am having trouble figuring out which is the best and easiest(recommended) way to do that. Which VPN ...
0
votes
1answer
143 views

Routing static IPs to different machines on LAN

We have Comcast Business Class (not the same as Comcast residential) internet service running to our home in to a Comcast-provided SMC D3G-CCR cable modem. This modem is configured to serve DHCP, and ...
0
votes
1answer
97 views

Use local gateway for internet access, but stil have the vnet accessable, tun interface

I did setup a OpenVPN server on a Fedora 20 VPS, I can connect to the server itself and its services via the vnet just fine. # +<tun>+ VNET <tun>-<eth> +------------+ # | ...
0
votes
1answer
866 views

Route internet traffic from openvpn tun0 to eth0

I can't figure it out. How do I give chosen VPN-users access to internet trough eth0? All server traffic goes trough eth1. The eth0 is only supposed to give VPN-users internet access on chosen ports ...
1
vote
0answers
313 views

How to auto login with OpenVPN

OpenVPN v5. ask about password in every connection try, so I want to automate this process. I created file password.txt with username/password and added line auth-user-pass password.txt to .ovpn ...
0
votes
0answers
129 views

OpenWRT: Share openvpn connection with network

I want to tunnel all the traffic of my network through an openvpn connection running on my openwrt router.. Openvon is installed on the OpenWRT router. It is possible to connect to the openvpn server ...
1
vote
0answers
8 views

Online collaborative team, connecting to 1 or more servers

I have a team of partners working from different locations in the world. We all are connecting to our own VPS, as well as to a bunch of customers websites via http and ftp to other shared or vps ...
0
votes
1answer
41 views

Client config for private openvpn server

I installed openvpn server on a local Ubuntu server at home. I want to use this to connect to in situations where I have to use public wifi. The server setup is done. I followed the Ubuntu guide, and ...
2
votes
0answers
285 views

VPN DNS Configuration bug in OS X

I am using TunnelBlick to connect to an VPN (OpenVPN) with OS X 10.9.2. I can authenticate and pass traffic but the DNS entries injected from the VPN do not work. Here is the output of scutil --dns ...
1
vote
0answers
162 views

VPN access kvm guests

OpenVPN is installed on my host system running kvm as virtualization and I've several guests with static/public (Bridged) and private IPs (NAT), every guest uses Samba to share some folders. how can ...
0
votes
0answers
25 views

how to import OPENVPN crttificate in Debian and Fedora latest?

how to import OPENVPN **crttificate in Debian and Fedora latest ??** I tried installing openvpn in Debian setting and reboot even in root with admin access but still cant see option to import ...
0
votes
1answer
39 views

How to make some applications pass through a network interface and some over different?

I am trying to setup an openvpn connection over the SSH tunnel which is having SOCKS proxy, but as soon as I connect to the openvpn server after setting up the SOCKS proxy, the SSH tunnel breaks as ...
1
vote
1answer
362 views

How can I translate these openvpn client configuration instructions to work with Fedora 20?

Here's the link to the full instructions. When I get to step 9, under the heading "9. Setup Client Config Files", it says: Now we will configure the openVPN to work as client. Remember that we ...
1
vote
2answers
360 views

Restrict internet access through VPN/SSH tunnel to prevent leaking non-tunneled data (No router)

Pretty simple use case. Let's say I use various applications, and at no such time can any of these applications ever transmit data natively from my actual connection. Here's my actual problem in more ...
1
vote
1answer
67 views

OpenVPN setup using only .openvpn and .key

I have a tunnel purchased from PRQ.se, previsouly I've been running it on Windows Server 2003 but I've moved on to Windows Server 2012 R2 this week. The OpenVPN program that PRQ recommends from ...
0
votes
1answer
169 views

VPN on, can't connect from outside world

I'm looking for help to configure my Synology. I can't ssh it from outside when the VPN is connected. Everything is fine when deconnected. I'm using openvpn with privateinternetaccess. I want to ...
0
votes
2answers
300 views

OpenVPN encryption and authorization issues

I have configured my OpenVPN server and client by reading various tutorials. The configuration I'm using currently is the following: For the server: port 1194 proto tcp dev tun ca ca.crt cert ...
1
vote
1answer
782 views

RDP over OpenVPN in Windows 8

I'm trying to configure a Windows 8 computer to allow RDP over OpenVPN. I successfully configured OpenVPN to start at boot, using the OpenVPN service. My problem is that Windows 8 sees the TAP ...
0
votes
0answers
136 views

How can one connect to a VPNGate VPN using a fedora system?

VPNGate is an academic project aiming to provide free VPN access to the public. The link is here: http://vpngate.net Unfortunately, they only provide a client for windows. Let's get some linux ...