1
vote
0answers
29 views

Linux Partition with SSD and HDD

I'm currently setting up my server and I don't get how to choose Disk 1 and Disk 2 for the partition. vg0 should be the HDD and vg1 the ssd. Maybe you can help me how to set up such in this syntax. ...
0
votes
0answers
16 views

External HDD I/O Error, disappearance problems

I have a problem with my HDD Toshiba Hitachi HDS5C3020BLE630 2.0 TB. I recently bought it with a damaged IcyBox where it came from. I attempted to boot it but it's not working. I tried many ways to ...
1
vote
1answer
28 views

Kali Linux boots to command prompt (gdm3 produces error)

I just got Kali Linux working on my Macbook Pro (after much laboring). I reinstalled Kali after I wanted to repartition my HD to make it larger. I boot into rEFInd first, and load the bootloader ...
2
votes
0answers
34 views

Multiple Windows installers on a USB stick

I've recently got my hands on one of those SanDisk Extreme 64GB sticks and started tinkering with it. During this story, please keep in mind that this is a model where removable bit is set to 0 (which ...
0
votes
0answers
18 views

Cloning Linux and Windows from two separate disks to a single SSD

Backstory TL;DR: cloned OpenSUSE from /dev/sda2 to /dev/sdc1, Windows 7 from /dev/sdb1 to /dev/sdc2; formatted /dev/sda2 and /dev/sdb1; reconfigured GRUB2 and installed it on /dev/sdc; OpenSUSE loads, ...
1
vote
1answer
28 views

how can disk be invisible for a moment

I did try to run mony linux in PC ram 500MB disk 40GB cpu 1,5GHz and sometimes after reboot linux like tinycore puppy partedmagic after load kernel and initrd in one time it can not see disk folders ...
0
votes
1answer
31 views

What is the correct way to configure a linux installation's partition system?

FIRST Sorry if this is technically a duplicate. i Have searched for the information and was unable to find it in any of the answers or forums. SECOND Since SE likes to close questions that don't get ...
1
vote
0answers
60 views

Dual Boot: Windows Vista - Linux Mint. Delete Partition , fix MBR

Scenario: Windows Vista Basic installed on Hard Disk Created a partition (after Windows Partition - i.e Windows is in the 1st Partition) Installed Linux Mint Cinnamon 64-bit (UP6) on new partition ...
0
votes
0answers
15 views

Userspace manipulation of partition and disk images

On a Linux system, is it possible to use only user-space tools to create and manipulate partition images (which will probably only have ext2 filesystems on them) and then take those partition images ...
0
votes
1answer
20 views

how to recover pv and lvm with no lvm export?

hi i have a server which its first hdd was broken , the server has 2 HDD , the first hdd crashed . datacenter replaced it for me with a new hdd. the second hdd use to have 2 pv on 2 partitions , ...
0
votes
0answers
11 views

size of extent on LVM2

in LVM1 there was a limit of 65k extends. So size of extent had to been chosen carefully between wasted space on partitions (to big extent) and maximal possible size of logical volume (too small ...
0
votes
2answers
51 views

Used 4 primary partitions, now need to add more space

I currently have CentOS 6.5 running on a VM in a live environment. The need to increase space has arrisen several times, and after following guides online it has worked successfully until today. ...
3
votes
1answer
71 views

How do I reset a WD Elements external hard drive to factory format?

I own a WD Elements 3TB external hard drive (WDBAAU0030HBK-01) which I disassembled and converted into an internal SATA drive. When I did that I partitioned the drive after installing it in my ...
1
vote
0answers
20 views

Dual boot W7 64bit + Ubuntu, W7 does not boot

Dual boot W7 64bit + Ubuntu installed. Ubuntu appears to work fine, but W7 will not boot. I downloaded boot repair and did the recommended repair. That did not work. I now have 6 partitions: ...
0
votes
2answers
58 views

Best way to duplicate Linux server

My company has an old CentOS 5 system that we need to duplicate for testing. I'm running dd on 2 of the partitions which are small and saving them to /home, but the /home partition can't save to ...
0
votes
2answers
34 views

How can I shrink a Logical Volume, and re-allocate the freed space into a new partition on the same drive?

I have a drive, sda. It has two partitions: sda1: /boot sda2: LVM managed in Volume Group volgrp01 volgrp01 contains the following Logical Volumes: lv_root (30 GB) lv_swap (8 GB) lv_scratch (430 ...
0
votes
1answer
80 views

Linux tools that can partition GPT with proper alignment

Proper partition alignment ensures ideal performance during data access. Incorrect partition alignment will cause reduced performance, especially with regard to SSDs (with an internal page size of ...
0
votes
0answers
17 views

multi-booting chromium os in a laptop with two oses already installed and only one hard disk

I've been wondering if their is a way of installing chromium os from this without wiping my only hard drive which I spent years filling it up with documents, videos and stuffs. Wiping it clean is ...
0
votes
1answer
14 views

Recovering HDD Space From Failed Linux Install

I had a dual-boot (Windows/Linux) on my laptop a while back, but the Linux partition became corrupted when I tried to install a different version of Linux and overwrite the previous one. How do I ...
1
vote
1answer
30 views

How to save Lenovo Ideapad Flexbook with a 1234F command prompt and boot issues

I got a little bit overzealous when trying to make my Windows 8.1 Ideapad dual boot Linux and now I'm afraid I'm about to lose 2 whole OS's worth of mission-critical data. Here's what happened: I ...
0
votes
0answers
7 views

Can I take this pre-existing unallocated partition and add it to my Linux OS (L:) logical drive?

I am trying to increase the size of the Linux OS partition to include a minimum of 30 GB possibly 35 GB, but I can shrink my main 1 any further or anything, would you be willing to help?
3
votes
1answer
131 views

SD Card corrupt after copying with dd command

I was trying to move the Pidora (Fedora for Raspberry Pi) image to my sd card using the dd command, but I realized that I had forgot to put in the bs=4M argument and had to terminate the program half ...
0
votes
0answers
17 views

How to make user-friendly “time machine” with my LVM thin-provisioned partitions?

I have setup all of my partitions on LVM thin-provisioned device. In some article I've read that this allows me to make incremental snapshots in a simple manner - move back and forward between them. ...
6
votes
3answers
276 views

Is it possible to boot Windows 8.1 without its own bootmanager?

I have been trying to come up with an easier way of installing Windows and Linux dual booting on my laptop, not necessarily in that order. What we generally have to do is install Windows first, and ...
0
votes
0answers
60 views

'executing grub install dummy failed' how to fix this?

I want to dual-boot my Win8.1 PC(HPpavilion17) together with Linux Mint 16.(x64) I've tried to install Linux several times but each time it says 'executing grub install dummy failed'. I tried both ...
-1
votes
2answers
51 views

UEFI: how to force windows to use only 1 partition?

on my old computer that used the good old BIOS, this is how i setup my partitions using gparted on a linux livecd: create partition table format MBR (msdos) create primary NTFS partition created ...
0
votes
1answer
26 views

Grub dual boot- debian wheezy (encrypted) with another OS

I'm trying to dual boot debian wheezy (encrypted) with another OS (win7, uses 2 partitions) In the wheezy installer I have created a bootable partition with 200M and then tried to made another crypto ...
0
votes
2answers
36 views

What is the best partition setup for a linux installation?

As a general rule, what is the best partition setup for a linux installation? I currently use three different ones, one as a swap space, one dedicated to the /home folder, and another one containing ...
0
votes
2answers
33 views

Converted vfat to linux with cfdisk, now cannot mount it

With cfdisk, I converted my vfat thumb drive to linux, but now I cannot mount the device. Here is what happens when I try. Disk /dev/sdc: 16.0 GB, 16008609792 bytes 255 heads, 63 sectors/track, ...
0
votes
2answers
28 views

Block/hide partition for Windows

I have a notebook w/ Win8.1 installed, and Linux alongside it in it's own partition.(duh) The thing is, I don't want the Windows system to be able to put crap on the Linux partition. I'd like to set ...
0
votes
1answer
29 views

Linux raid questions: How to boot if one drive fails?

I am setting up a linux server with two drives in an mdadm created raid 1. All the online help I fine says to create your partitions and then create an md0 raid volume using something like sda1 and ...
0
votes
1answer
28 views

Removing Failed Install Partition of Ubuntu

Alright so I attempted to install Xubuntu on my laptop twice. The first one I cancelled accidentally; the second one worked. The end result is the following disk structure: /dev/sda1 - System ...
0
votes
2answers
47 views

How to restore Ubuntu broken partition after Windows 7 install

I previously had a Windows 7 partition and a Ubuntu partition. When I formatted and reinstalled Windows 7, somehow the Ubuntu partition got corrupted. I can't open it and recover my files even with ...
0
votes
1answer
24 views

LVM while mdadm is creating a RAID6

So earlier today I was setting up a new server and creating a RAID6 array with mdadm. I then decided to create a physical and logical volume with LVM while it was running and throw on ext4. So before ...
0
votes
1answer
24 views

dd MBR and one partition

I have 2 partitions on a drive and I need to use dd to create a new image of just the MBR and second partition. Here is the output of fdisk -l /dev/sda Device Start End Blocks ...
0
votes
1answer
20 views

Is it possible to create software Raid array with operating system partition included?

I know that software raid array can be created in the OS it self. But my question is, Is it possible to create a software raid array including partition which is having Operating System installed ? Or ...
-1
votes
1answer
33 views

Installing Linux on a (By Default) 4 Partition Laptop

I have a Toshiba laptop and am trying to partition it to install Linux Mint. The issue is that somehow Toshiba laptops already come with 4 primary partitions, making it impossible to create another to ...
0
votes
2answers
48 views

Is it possible to delete sda1 or sda2?

I am trying to install Ubuntu alongside Windows 8. I tried to install many times, but when the page of installation to choose the partition comes every time I get confused. 4 partitions are shown ...
0
votes
1answer
49 views

EFI partition is 99 MB (instead of 100 MB)

I'm trying to install Linux Mint on an Intel NUC 4th gen. I first installed Windows 8.1 Professional 64 bit, I ended up with 3 partitions created automatically: 300 MB (recovery partition) 99 MB ...
0
votes
0answers
15 views

Scriptable resize (enlargement) of partition inside LV to end of LV?

I'm trying to automate some KVM installs, and I need to fit an existing image onto a newly created LV. The image is partitioned minimally, so I need a way to enlarge the first partition from the ...
0
votes
2answers
57 views

On which partition should I install Ubuntu or Kubuntu

Currently I am using Windows 8 Pro on my system. I want to use Ubuntu or Kubuntu with windows. I tried to install both of it. During installation, when I reached the page to select the partition to ...
0
votes
0answers
48 views

After resizing its partition, Windows won't boot.

I have a hard-drive partitioned into four NTFS partitions. One is "System Reserved", another is just NTFS storage, and the other two are for Windows 7 and 8. I successfully resized the 7 and 8 ...
0
votes
1answer
489 views

Issues installing Kali Linux alongside Windows 8

I am running Windows 8 64-bit with an i3-3230m with 750GB HDD and 8GB RAM. I installed Kali onto a 40GB unallocated partition. (Note: I had to change to Legacy mode in BIOS or my computer would not ...
0
votes
2answers
41 views

One primary partition left: Root or home?

I have Windows running on two partitions of my computer. I am now planning to install crunchbang on the left space. Hence I have one primary and two logical partitions left if I want to have root, ...
0
votes
0answers
33 views

UUID and Drive Cloning

I have a project that I am working on, which involves a USB Storage Device and a boo.table version of linux. The way this project is coming together, I am having multiple partitions on the USB drive ...
1
vote
1answer
79 views

create a very small filesystem 4k or smaller

I'm trying to create a very small Linux filesystem. Something 4k or smaller. It's for an experiment with backup software that does block level backups. I've got a Linux logical volume that's 4K in ...
1
vote
2answers
59 views

Where did my hard drive space go?

After installing a 120GB SSD on my computer, I ran df -h and got this result: Filesystem Size Used Avail Use% Mounted on /dev/mapper/fedora-root 50G 3.8G 43G 9% / devtmpfs ...
0
votes
1answer
36 views

How to rename /dev/sdax(partitions) in Linux

I made a partition like /part on my machine with some important data... But I can't stand the name of it... I want a clear solution to resolve it and change the name of it to for example /test... ...
0
votes
1answer
56 views

Windows ntfs partition hard disk fail recovery attempts

This is part question and part response. I'm not a Linux guy but I've used from it time to time. Here is my case: An HDD with Windows NTFS partition has failed, no recovery software on windows has ...
0
votes
1answer
47 views

Linux software RAID 10 on mixed drives - alignment

I have 4 2.5" 7.2k drives lying about and I'd like to build some RAID arrays for a bit of VM storage on my KVM lab box. There are 2x 320GB drives and 2x 500GB drives. I'm looking to create a RAID 10 ...