0
votes
0answers
7 views

ZyXel D1000 Pass Through Modem PPPoE

Does anyone have any experience with ZyXel D1000 being used in pass through mode. I cannot find a setting in the user guide to enable this. I found a non official guide for another model that refers ...
0
votes
1answer
26 views

Why PPPoE Connection fails with error 691 - ADSL2+ Modem

On Windows 7, an ADSL2+ modem is used to connect to my ISP using a PPPoE connection. 1-Username and password are correct. 2-The modem is configured to accept bridge connection with my ISP VPI VCI ...
0
votes
0answers
16 views

VDSL Router cuts download bandwidth with 70% servers as compared to direct PPPoE

I've been searching high and low for a solution but to no avail. Hopefully you can help me with a tip as to what can be the matter. I'm using a VDSL2 50Mbit/5Mbit broadband connection from my ISP. ...
0
votes
0answers
12 views

Network Fluctuating

Am working an a small business and i have over 20 client computers on my LAN and i am having a windows Server 2008 R2 on the LAN also which is my dns server. My ISP installed a bridge (outdoor) that ...
0
votes
1answer
54 views

I have split my PPPoE connection with an Ethernet switch and now I am getting the same speed in both PC simultaneously. why is that?

Not that I am complaining or anything, its just that I am overwhelmed! I have a PC and a laptop and a Netgear 5 port Fast Ethernet Switch. I connected both of my computers to the switch and started ...
0
votes
1answer
57 views

connecting to a pppoe network via an ADSL2 modem

I recently switched my internet provider from an ADSL2 based service to a pppoe based service. I have the old ADSL2 modem and would like to reuse it for the new PPPOE connection. The modem only has an ...
0
votes
0answers
26 views

pppd failing to reconnect after power outage

The overall problem is that since a power outage, I have not been able to re-establish my connection to my ISP via my router machine (which runs Arch). The expanded problem is that pppd (via netcfg, ...
1
vote
1answer
123 views

split routing with two PPPoE connections

I have a debian wheezy box running, which is supposed to function as router / firewall / webserver / samba server [...]. I have two accounts from my ISP: acc1 with one static IP, and acc2 with dynamic ...
0
votes
0answers
121 views

PPPoE interface goes down, and does not up automatically

In my Linux system, I had configured pppoe connection. My interface configuration file /etc/sysconfig/nework-scripts/ifcfg-eth1 is TYPE=xDSL DEVICE=ppp0 BOOTPROTO=dialup USERCTL=yes IPV6INIT=no ...
0
votes
0answers
29 views

Win 8 connect to specific PPPoE Access Concentrator

I have several PPPoE servers (access concentrator) in my network . Windows connects randomly to one of them so i should disconnect and connect until it connects to specific AC . Is there a way in ...
0
votes
1answer
129 views

Traffic is not routed through VPN when PPPoE is Used

I have internet through PPPoE but the traffic is not routed through VPN. i use ubuntu 12.04. Usually when i connect to a wireless internet adapter, there is no problem. But now I have to connect to ...
0
votes
0answers
246 views

Router DSL 2370U can connect only one device over Wifi PPPOE broadband

I use a PPPOE broadband connection , my laptop connects to the wifi router and my android phone also connects using pppoe app but I can use internet in any one of them. Each device has a seperate PPOE ...
1
vote
1answer
622 views

How to setup a router to use a 10MBps dialup connection

I have a broadband connection from a lesser-known ISP. Probably this is a problem with the ISP, but here it goes. The ISP just gives a Cat 5 2 pair wire cable that comes into my home. When I connect ...
0
votes
1answer
261 views

PPPoE dialer on iball extreme 150M router is hhowing 'CHAP Authentication Failed'?

I'm using Triple Play service which uses PPPoE over regular ethernet port. I have connected the RJ-45 to WAN port of the router and configured correct uname and pass in its settings. I have cloned MAC ...
1
vote
0answers
191 views

Connect two Broadband (PPPOE) at the same time

I have two Ethernet adapter in my laptop (running Windows 8), two Networking cable from hub (for same ISP) and two pair of user name and password to connect to internet using Broadband (PPPOE) ...
1
vote
2answers
9k views

Connect PPPoE broadband connection on boot on Windows 7

I got a static IP PPPoE connection from my ISP provider, and I am running a VNC server on it, and needs to connect a PPPoE connection on boot. Is there a solution to that?
0
votes
1answer
226 views

How to set up a PPPoE connection on a router which connects to the Internet through another router

My ISP has given me a router on which I don't have permission to set up the configuration (well, the important part at least. It's in bridge mode, ISP says). To connect to the Internet, I have to ...
0
votes
2answers
260 views

PPPoE, linux blocked by ISP?

I have two connections at different places, provided by two different ISPs. Both are using PPPoE to connect. When using Windows, I configure them in the same manner, except username and password of ...
2
votes
1answer
970 views

ADSL with RFC 2684 Bridging

My new ADSL line is now enabled, I can finally use my Netgear DM111Pv2 to use to the Internet. My ISP has told me a big surprise : I don't need to use a login and a password to connect to the ...
1
vote
1answer
871 views

What is the p-t-p (or remote IP) address in PPPoE connections?

In Linux when I connect to PPPoE via the pon command, the plog command shows two IP addresses: local IP address (which is my internet public IP) remote IP address (which I don't know what is it?) ...
2
votes
1answer
226 views

Why is PPPoE used for DSL rather than EAPoL?

While learning for my IT Security exam I wonder why PPPoE is used for establishing DSL connections instead of EAPoL? In PPPoE, the authentication is embedded in PPP frames, which are embedded in ...
2
votes
1answer
3k views

How configure my beetel adsl2+ 440txi modem as a wireless access point for a pppoe connection

I have a beetel router (adsl2+ 440txi) with wireless settings already configured and connected to laptop. This router is connected to another dsl router which is connected to the internet. I tried ...
1
vote
1answer
8k views

Attempting to dialup gives “Opening port… Error 813: another connection is using…”

This has driven me to the point of insanity :) When I wake my computer up and try to dial-up, I get this nice dialog: Opening port... Error 813: You have attempted to establish a second ...
1
vote
1answer
243 views

After upgrade from Vista to Win7, internet PPOE connection is unstable, keeps cutting out

I had a 64-bit Vista Ultimate desktop, and did an in-place upgrade to Win7 Ultimate. Hardware is a P5N32E-SLI motherboard, Q6600, 8GB RAM, 460GTX SLI. It is directly connected by ethernet to an FTTH ...
4
votes
3answers
5k views

What purpose is there in handling PPPoE on the router, rather than the modem?

I'm wondering what benefits there is to using "bridged" mode on a modem. If your router can handle PPPoE, is there any reason to bridge it over to the router, rather than having it run on the modem?
1
vote
3answers
1k views

PPPOE and LAN security?

If I use PPPOE to connect to Internet and enable network discovery for public networks, do I open my shared folders to others? If only admin from ISP can see my folders i dont't like it :) I hate ...
1
vote
1answer
722 views

Internet Connection problems with PPPoE over Fiber

I have a Fiber Optic Internet connection, where the Fiber Optic modem is connected to my Wi-Fi router. On every system that needs to connect to the Internet, I need to connect to the Wi-Fi router ...
1
vote
1answer
331 views

applescript: establish PPPoE connection

how would an Applescript look like that connects to a specific PPPoE configuration? i want to trigger this via Launchbar. (or a more fancy script which checks if the current chosen network location ...
0
votes
1answer
2k views

How do I change PPPoE password on Windows XP?

My mother has managed to change her DSL PPPoE password on the ISP side, but doesn't know how to change it on the XP side. I tried for a half hour over the phone to find it (remote assistance didn't ...