0
votes
0answers
6 views

Dynamic/Static striping across BTRFS raid groups

I'm looking to set up a new storage server and would like to use BTRFS to protect against bit rot. Ideally, I would like a setup as a theoretical (btrfs) raid6 (both data and metadata) for every group ...
1
vote
0answers
13 views

Raid 5 Degraded

I have a dell PowerEdge T110 with a raid 5 array that says it is degraded. This uses a perc s100 controller. I am using 4 74gb raptor drives for the array. The computer tries to boot but it hangs on ...
0
votes
0answers
3 views

mdadm on Debian 7 forgetting about a disk

I have a degraded RAID1 array running on Debian 7. I am trying to add another disk to the degraded array, but mdadm forgets the existence of the other disk at reboot. The array devices are /dev/sda1 ...
0
votes
0answers
10 views

debian boot procedure stops while starting RAID5 array

imagine the following situation: debian wheezy 7.4 on arm system created a RAID5 with 3 disks /dev/md0 created ext4 file system wrote entry to mdadm.conf via "mdadm --detail --scan >> ...
0
votes
0answers
42 views

Linux RAID Re-Shape Stopped, unmountable

I added another drive to my RAID 5 and migrated it to a RAID 6. Everything went fine, but now the process seems to be stuck at 63.2% and md2_raid6 takes 99.9 of the CPU. RAID Details: /dev/md/2: ...
0
votes
0answers
24 views

mdadm raid 6 stuck on rebuilding

I have a raid 6 running consisting of 9 1TB drives. Some time in the last couple of days, one of them became faulty and the raid startet rebuilding. But apparently it is stuck ... This is the raid: ...
3
votes
0answers
46 views

mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. ...
0
votes
1answer
37 views

Can I move a RAID drive to another Sata port?

I currently have a Windows Server 2008 R2 machine with 4 x 1TB drives in software RAID5 controlled by WS 2K8. I am planning to upgrade to 4 x 3TB in the same software RAID5. Clearly 8 sata ports (9 ...
0
votes
1answer
40 views

Hardware RAID vs. Software RAID [duplicate]

What is the big difference between software RAID and hardware RAID at the low level? What is really going on that sets the two apart? As far as I know, the only difference is the RAID card can have ...
1
vote
1answer
70 views

Does windows 7 disk manager mirror disk or partitions?

My servers Raid 1 disappeared when I did a bios update, And now in order to get it back I have to format my 2 * 3tb hard drives. Which isnt really a solution for me. So I have desiced to try and make ...
1
vote
0answers
70 views

MDADM RAID 5 disk missing after reboot

I have a server with 6 disks (4x2TB + 2x4TB). I put the 2TB disks in 2 RAID 0 and the resulting 2 4TB RAIDs with the 2 4TB disks in a RAID 5 array. The RAID works fine until I reboot the server. After ...
0
votes
1answer
46 views

CentOS Gnome only showing 1TB on 6TB Server?

I just bought a new server and want to use it to store files, It has 2x 3TB hard drives. I Set them up in raid 0 as i don't need any redundancy. I don't know much about servers and command-lines ive ...
0
votes
0answers
50 views

Why is windows server 2008 resyncing new raid 5 array?

I have setup a software raid 5 in windows server 2008 standard, immediatly after creating it now says resyncing. What is it resyncing when there is no data on the volume? Is it safe to write data to ...
0
votes
0answers
30 views

Skip initial resync on a new Windows software RAID 5 build?

I just added 8x4TB and created a software RAID5 volume. Server 2008R2. Based on progress so far, it's going to take 8 days to complete the resync. I'm not a busy man, but that's asking a lot. ...
0
votes
1answer
36 views

Setting up a RAID 5 Array

I am currently trying to convert my drives from just a bunch of external disks, each one individually shared from my (CentOS) server into a RAID array (ideally, RAID 5). At current, my drives are: ...
0
votes
0answers
13 views

Ubuntu boot through failed RAID

I have a large media partition as a separate RAID5 on my Ubuntu server. The server is not easily accessible, so I need it to continue the boot process in all but the most dire circumstances. Right ...
0
votes
0answers
72 views

Hybrid Raid-1 HDD + SSD — Write Intent Bitmap

I am currently running a laptop with 1 HDD and 1SSD. I currently am using mdadm to put some partitions in a raid 1 configuration with --perfer-write set on the HDD. I have this working correctly ...
0
votes
1answer
165 views

Understanding /proc/mdstat [U_] VS [_U]

My server is set up with raid1. A few nights ago sda fell out completely and data was corrupted. I replaced the drive, cloned the partition table and added the respective arrays. While adding sda3 ...
1
vote
0answers
21 views

Is there a safe way to move a partition beneath a linux software RAID5 using mdadm?

Suppose, for example, that you have a RAID5 across multiple disks and you would like to retire the oldest of the disks and replace it with something from this decade. I know I can fail the partition ...
0
votes
1answer
37 views

LVM while mdadm is creating a RAID6

So earlier today I was setting up a new server and creating a RAID6 array with mdadm. I then decided to create a physical and logical volume with LVM while it was running and throw on ext4. So before ...
0
votes
1answer
34 views

Is it possible to create software Raid array with operating system partition included?

I know that software raid array can be created in the OS it self. But my question is, Is it possible to create a software raid array including partition which is having Operating System installed ? Or ...
0
votes
1answer
77 views

Linux software RAID 10 on mixed drives - alignment

I have 4 2.5" 7.2k drives lying about and I'd like to build some RAID arrays for a bit of VM storage on my KVM lab box. There are 2x 320GB drives and 2x 500GB drives. I'm looking to create a RAID 10 ...
1
vote
1answer
135 views

Does Btrfs prone to RAID write hole effect?

Does Btrfs prone to RAID write hole effect? If not, does it mean that Btrfs in RAID mode is fully resistant to power failure?
0
votes
1answer
68 views

How can I change super-minor number of a software raid array meta 1.2?

I had a double failure while I was away on the holidays of my array. As I was saving the data, I created a new array on a new drive has /dev/md1 and copied the info from my almost failed remaing HD ...
0
votes
1answer
28 views

Is it possible to operate two RAID-0s alternately?

I have a software RAID-0 (two hdds) on a WIN7 machine that holds all footage of a video project. If I remove and store these drives and install two new drives as RAID-0 for another project, will I be ...
1
vote
1answer
255 views

How to create a software RAID-1 array on Windows 7 not spanning whole disks

I have a brand new PC dual booting out of a single SSD drive (win7+debian). I added a couple of 2T hd I want to use from both Win & Linux. My target is to have two separate RAID-1 arrays on four ...
0
votes
1answer
366 views

Windows Dynamic Disks vs BIOS FakeRAID

I have two 3TB disks in a Windows 7 Dynamic Disk Mirror array (effectively, software RAID1). Apart from being tied to the O/S (I can't mount the array in Linux, for example) - is there any difference ...
0
votes
0answers
56 views

Recover Truecrypt-encrypted software-RAID5 (maybe overwritten superblock)

I updated some parts of my fileserver and installed the latest Debian version. It detected the mdadm raid, but marked the array as 3 active devices and 1 spare device. I thought this was wrong and I ...
0
votes
0answers
59 views

linux mdadm: recover overridden array

I had 2 3TB disks in a RAID1 array as /dev/md2. I tried to recover that array, by recreating it (which was probably stupid). I issued mdadm --create /dev/md2 --assume-clean --raid-devices=2 ...
0
votes
0answers
240 views

TrueCrypt Windows 7 Software RAID: add mirror to system encrypted drive

I have my Windows 7 system drive fully encrypted with TrueCrypt 7.1a using "system encryption". Now I have a second, identical, empty drive that I'd like to use as a mirror of the system drive. In ...
0
votes
2answers
87 views

Use the speed of an SSD + two HDD in RAID 1

Is it possible to gain a speed benefit of an SSD if you create a software raid with a big SSD + two smal HDDs? At the moment I have a system with only two 320GB HDD. And I thought about inserting a ...
0
votes
0answers
164 views

Power loss during mdadm RAID level change

As per the title, my mdadm RAID was in the process of migrating from level 6 to 5 when the power cut out momentarily. Unfortunately I am no longer able to reassemble the array - the assemble command ...
0
votes
0answers
64 views

Raid drives missing filesystem

I recently had to do some troubleshooting with a RAID 5 on Ubuntu Server (a software raid). I ended up removing everything and start from scratch with 2 new drives. So I took out 2 out of 4 drives, ...
1
vote
1answer
240 views

RAID 5 degraded performance

I'm currently rebuilding my fileserver, but because of SATA port limitations, I can only use 5 disks at a time. I've remove a drive from my original RAID, so I've been able to create a new degraded ...
1
vote
1answer
386 views

Assembling an mdadm array with “possibly out of date” disks

I've recently moved house and have had some power problems after switching on my file server that's using a mdadm RAID5 set up. The file system I'm using is ext4. It seems that at some point two (of ...
1
vote
2answers
169 views

RAID on partitions or devices

I plan to create a software-only Linux MD RAID10 array from two identical 1TB discs (using mdadm). Should I create it directly on the two disc devices (/dev/sda and /dev/sdb) or create a partition in ...
1
vote
0answers
36 views

erased md0, md1 and can't recreate them

I previously had a working RAID 1 array. I think as a result of running grub-install /dev/sdb and grub-install /dev/sdc I somehow wiped my computer of md0 and md1. I need to set them up again. When ...
1
vote
1answer
155 views

Windows Software RAID: How can I view the Windows RAID parameters (disk signatures, etc.)?

The software RAID array in my Windows 7 x64 box failed. Drive tests report the drive itself as healthy. Two drives, RAID1 partition and one RAID0 partition. In Disk Manager, the failed drive shows up ...
3
votes
1answer
572 views

mdmda raid 1 - spare drive after SATA cable change

Yesterday my hoster changed a SATA cable of one of my hdds, when my server came back up again cat /proc/mdstat showed this Personalities : [raid1] md124 : active raid1 sda1[0] 4193268 blocks ...
1
vote
1answer
172 views

Documentation for mdadm bad block support

I've read a bit about that mdadm (and the kernel) now have bad block support but I am having a hard time finding any useful documentation on this subject. Is the bad block list for disk X duplicated ...
0
votes
2answers
63 views

Writing to a specific drive with software RAID4 on Linux

Edited to reflect conclusions from comments: I want to construct a software RAID-like array with 2 storage devices plus one parity device, where the parity device maintains the XOR of the two other ...
1
vote
1answer
239 views

Restart degraded RAID array after crash

I've had to (temporary) reduce my RAID5-Array, so that there are four out of five disks available. Things getting worse as my system crashed during write process. After reboot the system wants to ...
0
votes
1answer
74 views

How can I delete soft/motherboard RAID 1 from a different computer?

I have a drive. It was part of a RAID 1 mirror on a motherboard-based raid controller (nVidia controller on an ASUS A8N-SLI Deluxe), which, if I understand correctly, is considered to be "soft" raid, ...
1
vote
1answer
103 views

Resume mdadm array build after power outage?

I was building a 2tb x 4 disks using mdadm. Originally mdstat said it was going to finish in 48 hours but unfortunately at 47 hours a power outage came into play :-) So I decided to zero out the ...
0
votes
1answer
303 views

SATA Raid-0 Mixing SATA-II + SATA-III: Change jumper?

I have 2 SATA hard disks They are 2 TB each. Both are WDC Greens Respective models of *EARS *EARX EARX is SATA-III While the other is not. While the raid does function as is, would there be any - ...
1
vote
1answer
50 views

Can I go from noraid to raid1 to an existing Windows installation?

I am planning to switch from Ubuntu to Windows 7 for my HTPC and later add an extra 3TB disk. Can I install Windows 7 on a 3TB disk and later add a disk and upgrade it to 2x3TB software raid1 without ...
0
votes
2answers
132 views

software RAID in Linux - system partition on a separate drive?

I'd like to build a cheap NAS with two drives in RAID1 configuration using Linux software RAID. What are the pros and cons of having a separate system drive? My main concern is reliability of the ...
1
vote
0answers
54 views

Software RAID failed to mount after apt-get upgrade

I have a software RAID 10 (jfs) on an ubuntu 12.10 and require some assistance repairing the RAID after it failed to mount after a routine apt-get upgrade followed by a reboot. /dev/md0: Version : ...
2
votes
2answers
51 views

Is it possible to migrate a software RAID5 array to RAID0?

So last year I helped my father in France set up his Office machine with a RAID5 array of 3 identical 1TB drives (for a combined space of 2TB). Last week one of the drives died, he's using the machine ...
1
vote
1answer
63 views

Linux software RAID: Does it work if device nodes change?

If, for some reason, hard disks change device identifiers (e.g. /dev/sda becomes /dev/sdb and vice versa) does this affect a Linux software RAID system? I.e. would the device still work (assuming boot ...