0
votes
0answers
8 views

Add Mirror for volumes other than the last one in Windows 7 (disk “not up-to-date”)

I'm using Windows 7 x64 Ultimate. I have an existing 4TB disk with 3 NTFS volumes, a new 3TB blank disk, and I'm trying to mirror the volumes onto the new disk. My Windows install is on an SSD which ...
0
votes
0answers
12 views

Broke my RAID. hp dv4-5100 with 500GB HDD and 32GB SSD

I was having trouble installing Ubuntu, presumably cuz Ubuntu got confused with the RAID configuration of the HDD and SDD. So i found a thread that explained the issue a little, but skipped some ...
0
votes
0answers
65 views

poor write performance with RAID 5 array

I have an Intel RS2WC080 RAID controller card connected to an array of 8 WD Black 4TB SATA3 drives, in a RAID5 configuration. While the read speed is ~750MB/s the write speed hovers around 45MB/s. I ...
0
votes
0answers
13 views

Marvell 9128 sata 3 or Intel P55 sata 2, which is best for Windows software RAID 1 (mirror)

My friends has a Gigabyte GA-P55A-UD3, which come with Marvell sata chips and Intel sata chips.GA-P55A-UD3 specification I have just help him to install Windows 7 pro. I buy two new 1T HDD, I ...
0
votes
1answer
24 views

Software RAID 0 under Window 7 on 2 HDD only (including system drive) - is it possible

I have two hard drives in my notebook. I cannot add third drive. Is there a possibility to somehow set up software RAID 0 (striped) under Windows 7? My notebook does not support hardware RAID 0. I ...
0
votes
0answers
13 views

how to use Intel RAID 1 on windows 7 boot drive

I have a motherboard with Intel RAID. and 2 new and empty 1T HDD. I want to use 2 HDD as RAID 1 (Mirror) to install Windows 7 pro (C: drive). What is the best or correct way to do it? I have ...
1
vote
0answers
14 views

Finding reported drive errors in Windows RAID

This machine has been through a number of RAID configurations. Most recently, it had a single drive (Disk 1) installed without mirroring, and without error. A second drive (Disk 0) was added as a ...
0
votes
1answer
41 views

Raid Setup, 2 Hard drives - one shows in explorer

I got a new pc delivered to me and I go to start up the PC using a raid configuration. I then go to are you happy with these settingsand I select yes. Later on, I then notice that one of the hard ...
0
votes
0answers
29 views

Win 8.1 new installation - existing raid mirrors failed to load

I have just installed windows 8.1 on my tower PC, from previously having Win 7. This was a fresh installation with the OS partition formatted prior to installing Win 8.1. My spec is: X58A-UD3R mobo ...
-3
votes
1answer
57 views

Switch HDD mode from RAID to IDE [closed]

I made an ghost of 2 drives that were installed as raid 0 I made a ghost to one big drive. Now in the bios, the big drive can only run in raid0 modus. Is there a easy way so I can run this drive as ...
2
votes
0answers
124 views

Converting ASUS Zenbook from Win8 to Win7.. do i need raid drivers?

I've got an ASUS ZEnBook Prime, ASUS Zenbook UX301LA-XH72T 13.3" Touch Ultrabook and it runs 500GB SDD on RAID 0 configuration. This notebook is running Windows 8, and i desperately need to convert ...
1
vote
1answer
52 views

Windows recovery can't find Windows install

I'm trying to repair my boot loader for Windows after a Ubuntu install killed it. I'm trying to use the Windows Repair CD (actually USB stick), but Windows recovery can't find my Windows install. I ...
0
votes
1answer
21 views

Best RAID Solution for dual boot?

I've seen this topic talked about before on this site but with other users using 2 drives for the active partition (booting from the same HDD thats got RAID) however my situation is a bit different. ...
0
votes
0answers
16 views

How to reconnect Raid drives

I'm running Windows 7 and had two 2T drives connected in a Mirrored Raid which showed as Drive E. Last week I noticed I have a new Drive G as well and on inspection, realized it was the mirrored E ...
0
votes
1answer
59 views

Running OS image from Dell Laptop (set to RAID mode) in VirtualBox [duplicate]

I have two SSD images from two different modern Dell laptops that use the new BIOS that allows you to set your boot mode to "legacy" and then set your SATA mode to AHCI or "Raid mode" (Intel Rapid ...
0
votes
2answers
40 views

RAID Configuration 'seen' through

I have a RAID0 (striped) configuration with the following: 64GB SSD 128GB SSD 640GB HDD I'm turning my PC into a hackintosh, and the installer loaded properly, BUT The installer saw the ...
0
votes
1answer
45 views

Bios Raid and Windows that wants to format them

I shutdown my PC improperly by holding down the power button. Now Windows sees 2 HDD's with a RAW filesystem instead of my RAID. After the fast shutdown my raid went though the "Verify" stage with 0 ...
1
vote
1answer
151 views

Does windows 7 disk manager mirror disk or partitions?

My servers Raid 1 disappeared when I did a bios update, And now in order to get it back I have to format my 2 * 3tb hard drives. Which isnt really a solution for me. So I have desiced to try and make ...
1
vote
1answer
240 views

How can I restore RAID 0 on my DELL laptop?

I have been formating my dell laptop for quite a while, I bought it back in 2012, with one year warranty, it ended last august, but I think since the moment I formatted it to windows 8.1 I probably ...
0
votes
2answers
44 views

Is it possible to build RAID0 or RAID1 using 2 disk when one disk is not cleen?

I'm using win 7.Is it possible to build RAID0 or RAID1 using 2 disk when one is not cleen? I have 2 same hdd disks, one of them cleen and one with data. I want to build RAID0 or RAID1 (on the fly) ...
0
votes
0answers
107 views

Dell Precision T3500 Intel Rapid Storange Technology shows no Acceleration option?

I have a Dell Precision T3500 with a 2TB HDD with my OS installed and a brand new 128GB SSD which is not formatted. The SATA mode is set to RAID in BIOS and the latest version of the Intel Rapid ...
0
votes
1answer
54 views

Is there a chance to lose data if I switch RAID to AHCI

I have Windows 7. The boot drive is NON-raid SSD. I also have 2xHDD RAID1 (just data). RAID is Intel Matrix (or whatever the latest name for it). I installed Windows in RAID mode What might happen ...
0
votes
0answers
42 views

How do I accelerate more than one hard drive using Intel Rapid Storage Technology

I have a Biostar T77B, a 3570K, a Seagate 3TB 7200 RPM HDD, and an OCZ Agility 3 60GB SSD as the core of my system. I just bought a second Seagate 3TB 7200 RPM drive and a Kensington SSDNow V300 60GB ...
0
votes
0answers
228 views

How to check model of motherboard and motherboard support for RAID

I am following a guide to implementing a RAID 1+0 to my laptop when I encountered problems regarding the installation of the RAID adapter . I am suppose to check if my motherboard supports RAID and do ...
1
vote
0answers
270 views

How to install Dell T3500 RAID Drivers via unattend.xml?

I work for a medium sized company and, due to the recent XP phaseout, we're rolling out Windows 7 on newer machines throughout the company. Unfortunately, we've had problems doing so as the computers ...
5
votes
3answers
628 views

Can only see 1.6 tb with an 4 x 4tb raid 0

Im trying to have window see my raid 0 array. Please also note that I did research on google before coming on here. Ok so i just bought a z87-deluxe Dual and trying to set 4 x 4tb drive in a raid 0 ...
0
votes
3answers
94 views

Create a single partition from 2 hard drives Windows 7

I have 2x 3TB identical drives and i want to make a single 6TB partition from both drives so i don't have to keep copying files between the drives. ( i know if 1 drive fails i'll lose everything but i ...
0
votes
0answers
14 views

I've 2 disk in StripedVolume (W7/64b) but sees two dynamic disks

I work with 2 disks, 1 TB in striped volume with W7/64b, for a total size of 1.8 TB. After a corruption of the OS, I've re-installed same W7/64b (with the 2 dynamic disks not connected), and after ...
0
votes
2answers
137 views

RAID1 drive failed; partition missing after reboot

I think I shot myself in the foot here, but let me quickly divulge what's happened: Intel Matrix Storage Manager started reporting that one of the two disks I had in a RAID1 array configuration had ...
1
vote
1answer
357 views

How to create a software RAID-1 array on Windows 7 not spanning whole disks

I have a brand new PC dual booting out of a single SSD drive (win7+debian). I added a couple of 2T hd I want to use from both Win & Linux. My target is to have two separate RAID-1 arrays on four ...
0
votes
0answers
58 views

RAID 1+0 on Windows 7 Professional after installation

I have an old PC running Windows 7 Professional unformatted since 2008 on a GA-Z77X-UD3H motherboard presently which according to the instructions has support for RAID 1+0. Unfortunately I haven't ...
0
votes
1answer
534 views

Windows Dynamic Disks vs BIOS FakeRAID

I have two 3TB disks in a Windows 7 Dynamic Disk Mirror array (effectively, software RAID1). Apart from being tied to the O/S (I can't mount the array in Linux, for example) - is there any difference ...
1
vote
0answers
58 views

Dell Studio Slim 540s JBOD RAID

I'm working on a Dell Studio 540s that has dual 750GB drives in what appears to be a JBOD configuration. The computer reports "Missing operating system" at boot. The BIOS appeared to have been ...
1
vote
1answer
39 views

Setting up desktop RAID on some drives, but not all

I have a Windows 7 desktop with five SATA drives. I would like to make four of the drives into a RAID 5, but leave one (the OS drive) as is. From the reading I've done, I've found these options, but ...
0
votes
1answer
96 views

Why is BIOS switching from IDE to RAID mode?

Acer Aspire M3203. BIOS will randomly default HDD interface to RAID mode and fail to boot Windows 7, claiming there is no RAID array defined and, subsequently, "no boot device." If I go into BIOS and ...
0
votes
0answers
151 views

Intel Rapid Storage Technology service always crashes

I'm running Windows 7 x64 on a system based on an Asus Z87-Deluxe motherboard; the storage is configured for RAID mode; there is a single SSD drive for the O.S. and two 4-TB disks in a RAID 1 setup ...
0
votes
1answer
58 views

How can I get my SATA DVDs working again?

My hard drive crashed (WinXPpro), so I took a C drive from a broken PC. The new C drive is Win7pro. Motherboard is MSI K8N Neo4 Platinum, with 4 hard drives installed on SATA 1-4 (nForce4 Ultra); ...
1
vote
1answer
576 views

Faster SSD performance as cache drive or regular boot drive?

I have the choice of setting up a system: with two SSD Drives in RAID 1 mode as my boot drive for Windows 7 64-bit, with the Program Files and User folders moved to a second regular hard drive, also ...
0
votes
0answers
25 views

How do I import Outlook 2007 accounts and rules and IE usernames and stored passwords from old HD?

I had an older PC running Win7 and the motherboard died on me. I've since updated my PC to another Win7 machine running a RAID 0 along with my old HDD installed as an extra drive. The problem is, I ...
0
votes
0answers
178 views

Forgot to turn on RAID after flashing bios, now have, but can't boot

I was having bsod issues with my windows 7, raid 1 (intel rst) machine and so decided to flash to the newest asus bios. I think that part went well, but when reconfiguring the bios, I neglected to ...
1
vote
0answers
31 views

A few questions about windows 7 snapshots

I have been googling a while, but I am a bit confused about Microsoft VSS technology. Currently I am running Windows 7 Enterprise 64bit - everything patched to the latest versions. My system has one ...
0
votes
0answers
121 views

Lenovo BIOS logo prevents Dawicontrol RAID controller BIOS utility to show

I just ran into a really odd problem. I recently installed a Dawicontrol DC300e RAID controller on my Windows 7 64-bit Lenovo H520s desktop. In order to set up the RAID groups, I need to enter the ...
1
vote
2answers
640 views

HDD + SSD Raid 0, does it make sense?

On my laptop, I have a 22GB SSD and a 500GB HDD. I just reinstalled Windows and because of some problems, I reset everything in Intel RST. In the end I ended up using a 44GB Raid 0 partition, but now ...
0
votes
1answer
249 views

Can I emulate a NAS OS on Windows 7 with an extra network adpter?

I want to setup a RAID NAS but I don't want to buy another computer or lose the game library of my Windows i7 system. Therefore, I'm wondering if you could just use an emulator to run a NAS OS in the ...
1
vote
0answers
202 views

Rebuilding a RAID 1 without data loss, recover from unallocated partition data

Mobo: ASUS P8Z77-M/Pro Gen 3 RAM: 32GB (4 x 8GB) Power Supply: corsair HX850 HDDs:Configuration before the problem: 1 x 128GB SSD for Windows 7 professional 64-bit 2 x 3TB drives in RAID 1 on the ...
1
vote
0answers
97 views

SATA-II SSD Raid 0 slow on Windows-7

I have 2 SSDs and made a RAID 0 with the on-board controller of my mainboard. But i only get 130 megabyte/second average read/write speed which seems to be pretty slow for me even for SATA 2 which ...
1
vote
1answer
211 views

Trying to clone raid (striped) To USB Hard Drive

I am trying to clone a raid drive that was striped over to an external USB hard drive. I have tried Paragon in both clone and image and restore, EaseUS in both clone options, and Acronis. Nothing ...
1
vote
1answer
122 views

How can I image and restore Windows 7 on a Intel Rapid Storage RAID?

I have some Dell machines using with this card with an 32G SSD and a 2TB HDD. Every live environment I've tried so far has not seen the OS drive. I've tried these: Acronis Clonezilla Ghost Easeus ...
1
vote
1answer
26 views

Any way to get what is effectively a 4 drive mirror in Windows 7?

I know this doesn't serve that much practical purpose, but I would like to somehow set up a small 400mb partition that is mirrored across 4 drives. I partition using the Disk Management Console, and ...
1
vote
1answer
40 views

directory level (logical/virtual?) RAID

First off, let me begin by stating that I do not even really know what I am LOOKING for, in terms of keywords to send to google. Therefore, if you can directly answer my question, great; if not, I ...