Redundant Array of Independent Drives or Redundant Array of Inexpensive Drives also known as RAID is a way to create a sub-storage system comprising several individual discs. RAID-0(also know as striping) is the level of RAID technique used to improve read performance. Over this configuration the ...

learn more… | top users | synonyms (1)

0
votes
1answer
660 views

SATA RAID Mode - 2 Disks in RAID0 and 1 Disk RAID0 alone

I have this box of mine that I use mostly for VMs for my Windows LAB Practices while I am preparing myself for Windows certifications. It has Win7 with VMware workstation. I have 1 HDD on which I run ...
6
votes
1answer
612 views

How to automount ntfs partation on raid0 in arch linux with systemd

Recently, I switched from initscript to systemd followed this wiki, and I got error like this during boot: Job dev-md126p5.device/start timed out This is my fstab: /dev/mapper/VGLinux-lvroot / ...
3
votes
2answers
248 views

Is there a way to revert/destroy/disassemble a RAID-0 set with Disk Utility?

And recover/reconstruct the data (that is split in half) across two SSDs? I just haven't noticed enough real-world-usage improvement using RAID-0 (perhaps related question) and would like to use the ...
1
vote
1answer
90 views

RAID Controller Questions

I have a P8Z68-V Pro Motherboard and two 500GB 7200rpm hard drives that I used to have in a RAID0 configuration using the Z68 bios level raid. However, I've run into trouble in the past trying to ...
1
vote
1answer
540 views

Should I use Windows write cache if I have RAID controller + BBU?

I have ARECA ARC-1231ML 2 GB Cache and RAID 0 with 4 A-data 30 GB SSD drives and sometimes Windows is checking filesystem during boot. I think the problem is that my system is using RAM as write ...
0
votes
0answers
867 views

raid-0 failing, restore array on intel matrix controller, mark as a spare drive

I have asus p3k-35 (or something like that) and it comes with a raid controller on board. I set it up with raid0 2x500G drives and one is failing now. At first WinXP BSODed and then after restart it ...
1
vote
2answers
374 views

How to recover data from Dell dimension 9150 RAID 0 on another system?

I have a Dell Dimension 9150 which has failed. I'm trying to recover the data. It had two SATA 250GB drives in RAID 0 configuration. I'm trying to use a shuttle PC running Windows7 to recover the ...
-1
votes
2answers
316 views

How is it possible for SSD's drives to have such a good latency?

First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's ...
1
vote
1answer
199 views

Raid-0 (2xSSD) + Raid-1 (1xHDD) possible?

Is it possible to have the following setup? 2 x SSD (2x128gb) in RAID-0 (for performance) + 1 x HDD (1x500gb but using 128gb) in RAID-1 (for redudancy) If so, does the HDD mirror give a decrease ...
0
votes
2answers
739 views

Lost RAID after boot

Yesterday I have shut down my computer (running Vista x64). This morning, the computer does not boot and the RAID matrix no longer exists. I have two identical 500gb HDD, which were working fine for ...
2
votes
2answers
2k views

Is it possible to make raid 0 from 2 ssd drives? [duplicate]

Like in the title, is it possible. I was thinking about that last year but everybody told me that it's not possible due to controller issues. Today I revisited that idea after seeing awesome vids on ...
0
votes
1answer
274 views

Repairing windows 7 Raid 0

I have a raid 0 4 x1tb and 1x 3tb (a bit silly I know) but the partitions are now showing as RAW after I did a ckhdsk! is thair any raid reconfiguration software out there that will fix this? or is ...
6
votes
3answers
2k views

To RAID or not to RAID: SSDs and virtualization

I am approaching that time where my main PC has slowed enough due to Windows rot that I should probably reinstall. Instead of spending a week arm-wrestling, reinstalling and configuring only to find ...
1
vote
1answer
184 views

RAID0 disk recovery?

I've not lost a RAID0 setup but since both drives are used as one, is there anyway possible to even access data on just one drive via a sata cable or will you need both drives in a RAID0 setup to be ...
1
vote
1answer
850 views

Simple Ubuntu Server - Expanding disk space - adding a new drive LVM, RAID0 existing setup - how?

I have a 1TB ext4 partition mounted at / with all my data and Ubuntu 11.04 (natty) installed. Now this drive is almost full (I used it as a database server for some processing). RAID0 is ok, I can ...
1
vote
1answer
801 views

Replacing a non-failing drive in a RAID-0 array

I have a Windows 7 machine booting on a RAID-0 pair of 500GB disks, controlled by an ICH9R. One of those was indicating an end-To-end SMART failure, so I added a spare disk as a temporary workaround, ...
2
votes
0answers
854 views

Better to run 4 SSD drives in RAID 0, or have 2 2xSSD RAID0? [closed]

I have 4 SSD drives 2 identical old ones: Corsair SSD Extreme X32 2,5" 32GB - SATA2, read/write 220MB/135MB 2 identical new ones: Corsair CSSD-F40GB2-A Force Series 40GB, read/write 280MB/270MB ...
4
votes
3answers
10k views

How do I clone a RAID 0 array to a single disk?

Situation: One empty 120GB SSD Two 60GB SSD's is RAID 0 containing a Windows 7 installation The RAID is firmware-based (a.k.a. fakeRAID) which means it requires a driver for it to be seen by an ...
1
vote
2answers
2k views

Recover data from RAID 0 disk images

I have four (4) disks which are in RAID 0, but the (Lacie) hardware enclosure failed and I'm trying to recover the data stored. I'm now trying to rebuild the RAID to access the data stored, but can't ...
0
votes
1answer
1k views

One RAID 0 drive at risk - can I back up data to the other drive?

I have a RAID 0 array with two 1TB hard drives. The RAID build came with the PC. I didn't set it up. Last week I started getting "Drive 1 at risk" message in the Intel Rapid Storage Technology ...
1
vote
0answers
460 views

chkdsk unable to free space on corrupted RAID 0 partition

I have a two 1TB SATA drives configured in RAID 0. The partition is showing as 100% full despite only containing several hundred gigabytes of data. When Windows boots, chkdsk attempts to ...
0
votes
2answers
862 views

What are the theoretical performance differences between a single disk and a RAID-10 array?

Not taking hardware RAID cards into account, what kind of theoretical performance improvements should I see when using 4 disks in a RAID-10 array vs 1 disk by itself? For example, on RAID-0, I would ...
0
votes
0answers
531 views

Cannot get Sata 6gbs: ASUS P8Z68-V/GEN 3, OCZ Agility 3 60g in Raid 0

Setup: 2x OCZ Agility 3 60gigs (2.15 fw) - On the 2 new sata cables that came with my new mobo connected to the two sata6 ports and verified in bios ASUS P8Z68-V/GEN 3 (latest/only bios) Bios ...
1
vote
1answer
586 views

Recover data from two RAID 0 drives in Fedora or Ubuntu

I have an external drive from WD which consists of two separate 3.5" discs which have been used in RAID 0 mode. Unfortunately, a while ago I fed the drive with to high voltage which probably fried the ...
1
vote
1answer
452 views

how to undo my RAID 0 setup while preserving data?

I currently have a RAID 0 setup with 2 drives with a single partition which holds my OS on it. Now I want to take one of those drives out and put them into another computer. But I want to keep my OS ...
0
votes
1answer
3k views

Corrupt MBR in RAID-0 setup - Missing Operating System

I have a 2x500GB RAID-0 setup on an Asus M4A785TD-V EVO Motherboard. Recently, I was doing regular cleaning and after assembling up again the PC started normal. But on the next boot, it suddenly gave ...
1
vote
1answer
325 views

Most efficient SSD configuration for multitasking system?

Currently, I have a 2x500GB RAID 0 system. I’m thinking about an upgrade but I got held up by a few questions. I need at least 100-120GB for my system and apps and I'm looking for a technological ...
0
votes
1answer
277 views

RAID 0+1 Transfer speed and ssd / hdd combination

can you help me choosing a raid system? ive got raid0 on my last system (ssd) = fast transfer rates BUT they crashed and all data went into trash. isnt there a system that mirrors a raid0 ? (wiki ...
0
votes
0answers
55 views

Windows 7 Raid - Drives can't see each other

I'm trying to stripe two drives using the disk management tool. Both partitions give me the option to stripe them but when I use the wizard the other drive doesn't show up to allow me to raid to it! ...
3
votes
2answers
2k views

What is faster: SSD (OS) + HDD (Data) versus 2x HDD as RAID 0 stripe?

I will mostly be working with Autocad Software, Photoshop and maybe some other design software (architecture). I will have a Quadro FX graphics card for rendering. So I am not so much interested in ...
2
votes
1answer
1k views

How do I create a RAID 0 volume on Dell Optiplex ICH7R?

I just bought a second-hand Dell Optiplex 330, Core2Duo 2.2GHz with G31 & ICH7R, which has a fresh installed Windows 7 Home Premium. The specifications sheet from Intel said ICH7R supports both ...
0
votes
2answers
218 views

Result of raid 0 with these two HDD

I'm new to raid arrays, and I'm trying to figure out what I would gain by combining this hdd: http://www.seagate.com/ww/v/index.jsp?vgnextoid=9d373f15020b0210VgnVCM1000001a48090aRCRD which is a ...
2
votes
1answer
242 views

Run RAID 0 on SATA 3 on Windows 7 Home Prem, already installed

I have a Gigabyte GA-990XA-UD3 with one HDD connected to SATA Port #0. Can I install RAID 0 on #4 and #5 without totally starting over? To enable RAID for these, I set the On-chip SATA type to RAID ...
3
votes
3answers
637 views

RAID 0 + 1 with 3HDD 2x1TB + 1x2TB

Is it possible to make RAID 0 + 1 with 3 Hard Drives I have currently setup raid 0 with 2x~1TB HDD (1.8TB approx) Now i got 2TB HDD (1.9TB approx) which i want to be as a mirror drive. Is is ...
0
votes
1answer
215 views

Advice on installing a new SSD/Windows 7 Raid setup

I was wondering if I needed to do anything before setting up my new PC: I will have 2xSSD in RAID 0 (hopefully). Do I need to configure anything in the BIOS before setting up Windows 7 64-bit? It ...
1
vote
2answers
136 views

Can a RAID 0 be “seen” but not accessed when a drive fails?

I have a machine running Windows XP SP3 with a RAID 0 (2x 500GB). A few days ago, a message appeared in Windows saying one of the drives had a problem, but it ran a test (with Windows RAID Manager, or ...
1
vote
1answer
161 views

Hardware RAID 0 without OS re-installation

I have Ubuntu & Windows 7 installed on my hdd. Can I mirror the image of the hdd to the second identical drive? Is this not recommended (i.e have to re-install every OS)? If it is okay to ...
1
vote
1answer
3k views

RAID0: Can I transfer my disks onto another motherboard/RAID controller? [duplicate]

I have 2 1TB drives that I set up in RAID0. Unfortunately, my old system is in pretty crappy shape and I might not be able to boot onto it. This means that the motherboard and old RAID controller are ...
1
vote
1answer
281 views

Repair (or relocate to new enclosure) a failed disk array

I now have 2 failed external hard drives that won't mount. They are well past warranty. Opening one reveals two 3.5" HDDs...connected to the controller via SATA. (haven't opened other one so not sure ...
6
votes
1answer
835 views

How can I optimize the speed and lifetime of SSDs used in a RAID-0?

I have two SSDs in RAID-0 on a Windows 7, 64-bit system. Since it appears that TRIM still isn't supported with any RAID configuration of SSDs, what are some tips/workarounds that I can use? Some ...
2
votes
1answer
1k views

Can I RAID 0 two secondary drives without involving my primary disk?

I have a 60GB SSD as my primary OS drive. It has a few core applications on it, but because of the size, I don't want to put too much on it. My intention is to get two 1TB drives to use as storage ...
2
votes
1answer
500 views

Disaster After Removing Two HDD From LaCie RAID 0 Case

This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be ...
0
votes
4answers
255 views

Does one get built-in RAID for a 2.5" HDD?

Is there a 2.5" HDD that is built such that it behaves like RAID 0 (IE, improved performance). If not, is there software (firmware) that allows one to do that? clarity: I'm thinking of something ...
2
votes
1answer
686 views

Making fdisk see software RAID 0

I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another ...
0
votes
2answers
3k views

Making GRUB see software RAID 0 under Ubuntu 10.10 LiveCD

I just installed Windows 7 recently, and I expect that it would alter GRUB and it did. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. ...
1
vote
1answer
919 views

Western Digital My Book not recognized by WD software

A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one ...
0
votes
2answers
2k views

Replace a failing disk in a RAID 0 array

I have a 2-disk RAID 0 array, which is reporting errors on one of the drives. I've arranged for an identical replacement to be sent out from Dell, but I want to create an image of each partition ...
1
vote
4answers
1k views

Hardware Raid Card Reviews with SSDs

Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I ...
0
votes
3answers
890 views

Software RAID0 with drives of drastically different sizes

Is it at all possible to do a software RAID0 (with Ubuntu Server, installing Crunchbang on it though) with drives of drastically different sizes? One of the drives is 250GB while the other is 60GB.
0
votes
3answers
881 views

Diagnosing Windows / HDD / RAID0 failure

My machine is as follows: Pair of hard disks in RAID0, ATA Hitachi HDT72505 nVidia motherboard, "M51"? Windows XP refused to boot: Booting normally results in hanging during the Windows loading ...