0
votes
0answers
27 views

Can't add drive to mdadm RAID1 array

I have a mdadm RAID1 array in a production server. SDA fell out and when trying to re-add SDA3 to MD2 I think it failed. The syslog shows: [28375.974199] sd 1:0:0:0: [sdb] Add. Sense: Unrecovered ...
0
votes
0answers
26 views

btrfs does not show drive as missing

I am trying out btrfs and I noticed some funny behaviour: I have two drives in a raid 1 configuration. sudo btrfs fi show Label: none uuid: 52b9c6f6-ce5c-4727-861e-e2fd012e475f Total devices 2 ...
1
vote
1answer
149 views

How to create a software RAID-1 array on Windows 7 not spanning whole disks

I have a brand new PC dual booting out of a single SSD drive (win7+debian). I added a couple of 2T hd I want to use from both Win & Linux. My target is to have two separate RAID-1 arrays on four ...
1
vote
2answers
43 views

What are the risks of running a software RAID 1 array in degraded mode?

I'm replacing my workstation's system drive and would like to in the future be able to easily add a second drive to form a proper (although software) RAID 1 mirror. For the time being, however, I'm ...
0
votes
0answers
124 views

mdadm RAID1 on OS drive by cloning, then changing the UUID on 2nd disk?

Ok, I've been doing some research into installing ubuntu server onto an mdadm raid1 setup and ive come across a couple ways: 1) install it onto two drives by using the "manual" method on the cd ...
1
vote
0answers
274 views

md0 RAID1 can't read superblock

i have a problem with my md0 array, which is an raid1 (2 mirrored USB-Sticks) Mount gives "Can't read superblock" cat /proc/mdstat: Personalities : unused devices: <none> fdisk -l ...
0
votes
1answer
122 views

Can't format hard drives under RAID-1

I have a Gigabyte GA-EP45 extreme, which contains a "Intel Matrix RAID controller". On lspci outputs as: RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] I bought two ...
1
vote
0answers
85 views

Is `dmsetup remove` safe with respect to contained data?

I have a "lost" SW RAID array as described in this question: http://askubuntu.com/questions/311024/raid1-array-lost-after-upgrade-from-ubuntu-11-10-to-13-04. I have now identified a way to mount one ...
1
vote
0answers
148 views

Upon reboot, Linux software raid fails to include one device of a RAID1 array

One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). ...
0
votes
0answers
77 views

is it possible to mount only one device from software raid 1?

Is it possible to mount only one device from raid without mdadm? Eg: I have /dev/md0 raid 1 consisting of /dev/sda1 /dev/sdb1. I thought that /dev/sda1 contains filesystem with data (same as /dev/md0) ...
1
vote
0answers
173 views

Cannot read NAS drives formatted for Linux

I have two hard drives (mirrored) in a QNAP TS-209 Pro II NAS box that won't mount properly. They are formatted for Linux (EXT3 file system) and the problem appears to be with the NAS, not the drives ...
0
votes
1answer
204 views

How to properly change directory structure/mount points for directory?

After several attempts to formalize my problem, I think, I finally managed to do it. What I have: mount -l ... /dev/md123 on / type ext3 ...
0
votes
3answers
153 views

Continious mirroring of the whole notebook hard drive into a file on the exernal usb hard drive in Ubuntu Linux

What I need to have continious mirroring of the whole notebook hard drive into a file on the exernal usb hard drive. Sometimes the external drive could be unplugged. I'm running Ubuntu Linux.
-2
votes
1answer
833 views

Software RAID 1 broken, how do I fix this?

I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device ...
1
vote
0answers
341 views

How to move a software RAID 1 to a new pair of larger drives?

I'm running CentOS 6 on a server that has two 80 GB internal drives, in a software RAID 1. I want to replace this two internal drives with 750 GB internal drives I have available. How do I do this ...
1
vote
2answers
907 views

Recovering data from RAID1 drive

I have recently received one of the two 1TB drives I had on a dedicated server. The drives were mirrored and the server was running CentOS 5.6. I've installed it in an USB enclosure and tried ...
15
votes
7answers
16k views

Simple mdadm RAID 1 not activating spare

I had created two 2TB HDD partitions (/dev/sdb1 and /dev/sdc1) in a RAID 1 array called /dev/md0 using mdadm on Ubuntu 12.04 LTS Precise Pangolin. The command sudo mdadm --detail /dev/md0 used to ...
1
vote
0answers
767 views

mdadm: hot remove failed

My RAID1 is degraded and I need to replace /dev/sdb. However, I could mark /dev/sdb5 (in /dev/md1) as failed and removed it, but I can't do the same with /dev/sdb1 (/dev/md0 which is mounted on /): ...
0
votes
1answer
120 views

How to identify raid1 disks

I would like to know how mdadm identifies physical disks of raid1 . I think it is managed by uuids not device file like /dev/sdc2 /dev/sdd2. But I can`t confirm such information of raid1.
4
votes
3answers
4k views

Does RAID1 increase performance with Linux mdadm?

I have a cheap 2-bay NAS with a 2TB HDD. To be robust against disk failure, I'm thinking of buying a second 2TB HDD and putting it in RAID1 with Linux mdadm. The file system is ext4. Will this ...
4
votes
2answers
2k views

How does one enable --write-mostly with Linux RAID?

Unfortunately the mdadm and mdadm.conf man pages are not quite up to par. I would like to enable the --write-mostly flag for my RAID, but neither the man pages nor the internet will tell me how. I am ...
1
vote
4answers
3k views

How do I mount a software RAID1 (mirror) created by windows in Linux using mdadm?

I'm switching my Windows server to Ubuntu and am trying to get my software RAID1 (mirror) that I created in Windows to show up in Ubuntu. I have read that this is possible here using mdadm, but I'm ...
2
votes
1answer
6k views

Install Linux mint with Raid

My MB supports fake raid (Intel DH67CL motherboard). But I was using the system in 'software raid' as I could not correctly set up fake raid in Debian. Now, I decide to use Linux Mint 12. During the ...
2
votes
1answer
8k views

How can I mount a single RAID 1 disk/partition as ext3?

I need to copy data from a single HD, which used to be part of a Linux RAID 1. I've googled around, but can't find any clue how to mount partitions from this single HD. Background: The HD comes from ...
14
votes
2answers
5k views

combining SSD and hard disk in software RAID1?

Does it make sense to build a Linux software RAID-1 (mirroring) using an SSD and a normal hard disk? I want to combine the advantages of SSD (fast transfer rates, fast access times) with the ...
0
votes
1answer
351 views

Raid 1 Disk Syncing

When attempting to test that my RAID-1 configuration was working, I am thinking that I may have made a mistake that could cause future corruption of data because I booted from a single HDD when the ...
0
votes
1answer
261 views

Linux software RAID 1 without metadata on the drives (still mountable without the raid setup)

I know I can simply create a degraded raid array and copy the data to the other drive like this: mdadm --create /dev/md0 --level=1 --raid-devices=2 missing /dev/sdb1 But I want the specific disk to ...
1
vote
1answer
2k views

Unable to access intel fake RAID 1 array in Fedora 14 after reboot

1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays: 2x320GB RAID1 - used for operating systems md126 2x1TB RAID1 - used for ...
1
vote
2answers
398 views

Move mount point to new RAID set

I have a CentOS 5 production server with multiple OS-managed RAID-1 sets. I'd like to add a new mirrored set and move the /var partition to the new drives. What is the best way to do this? On a ...
1
vote
3answers
3k views

Dual Boot Windows 7 & Linux Ubuntu on SSD with Data on 2 HDD's in RAID 1

Can someone point me to clear directions for a Dual-Boot system using Windows 7 on #1 SSD and Linux Ubuntu on SSD #2? And then configuring 2 HDD's in RAID 1 for Data (NTFS)? Clean Install all around. ...
2
votes
3answers
973 views

RAID-1 and regular drive removal (using RAID-1 as a backup measure)

Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume ...
2
votes
1answer
112 views

Can't write to raid on Fedora

I just did a fresh install of Fedora 11 and added Raid 1 following this tutorial: http://www.optimiz3.com/installing-fedora-11-and-setting-up-a-raid-0-1-5-6-or-10-array/ Now I see the filesystem when ...
1
vote
2answers
385 views

How do I setup a software raid 1 on 2 newly installed HD's in ubuntu

I setup a HTPC about a month ago, and just expanded my storage by adding two 750GB drives in addition to my OS drive. I am using Ubuntu 9.10 as my OS and need help setting up a raid 1 on the two ...
6
votes
3answers
4k views

In Ubuntu, how to get email notifications about (software) RAID problems?

I know getting email notifications should be possible, and perhaps even enabled by default... But how to make sure alerts are properly configured, and if, for any reason, they arent't, how to set them ...