RAID 1 is the official name for mirrored disks or volumes

learn more… | top users | synonyms (1)

0
votes
0answers
73 views

Trying to mount Western digital mybook duo raid 2 disks but fails

I connect both my linux system. I do a bash-4.2# mdadm --assemble --scan mdadm: /dev/md/MyBookLiveDuo:2 has been started with 2 drives. then i try mount /dev/ ash-4.2# mount /dev/md/MyBookLiveDuo:2 ...
0
votes
0answers
40 views

Win 7 won't recognize 850 Evo single disk with HDDs in RAID1

This has managed to drive me nuts: I used to have 1 SATA HDD as a single drive for OS's and 2 SATA HDDs set-up as RAID1 using the onboard AMD controller for storage, everything was fine. I bought this ...
0
votes
0answers
36 views

Is it possible to create RAID1 and JBOD with 2 hard drives?

I have a 2-Bay Synology NAS enclosure and ideally I want to achieve the following setup, unfortunately the GUI doesn't allows me. So my question is Is it possible to create the following setup? And if ...
0
votes
1answer
167 views

How do you increase harddrive space on an Intel hardware RAID 1 with larger disks?

I have an old RAID 1 volume from about 7 years ago. A while ago I replaced one out of two drives with a drive with 4x the size and then recently I replaced the second two out of two disks. Both of the ...
0
votes
0answers
10 views

Unable to tell if RAID 1 (or any RAID) is active

I recently installed Windows 10 on a new computer build, but wanted to install it with RAID. I haven't done RAID before, but I set it up in my BIOS. But once I do this, now it says that both drives ...
0
votes
0answers
18 views

To know hard disk failing in RAID 1

I have set up RAID 1 in windows 7 using disk management console. But I don't know if one hard disk is failed. I would like to get alert or message when one hard disk is failed in RAID 1. How can I do ...
0
votes
0answers
19 views

changing RAID hard disks

There are four hard disks in my machine. I installed window 7 in disk 1. I set up RAID 1 in disk 2 and 3 in disk management console. It is working well. But I would like to change RAID hard disk. I ...
0
votes
0answers
23 views

3 mirrored volumne in window 7

Can I make 3 mirrored Hard disk in window 7? I would like to use backup system(mirrored volume) with RAID 1 in window7. But the problem is that I can make two volume mirrored. Is that possible?
0
votes
0answers
26 views

Raid 1 upgrade path?

I have a 3ware 7950-4i RAID controller configured as the boot drive for a Linux server running several virtual machines. It is populated with three 1 GB drives. u0 consists of p0 and p1 configured as ...
0
votes
1answer
389 views

WD EX4100 RAID Adding Drives (4TB Red)

I have an WD EX4100 with two bays open; set to raid1 4x2 x raid1=4tb I want to add 2 more 4tb drives will raid rebuild or do I have to start over?
0
votes
0answers
41 views

recover data from single RAID 1 disk

I have a Lacie 2 Big NAS drive containing 2x1TB disks in RAID 1 mode. Since one of the disks was being reported to fail, I tried to backup the contents of the NAS to another external HDD. ...
0
votes
2answers
19 views

Raid 1 with two hard drives, which hard drive will overwrite the other?

I have two hard drives in a raid-1 volume that Windows 7 boots from (let's call them harddrive-a and harddrive-b). I got a third harddrive-c so that I could install Linux. To protect my Windows ...
0
votes
0answers
64 views

Software RAID 1 in centos 7

I created software raid 1 using Two 1 TB hard disk in centos 7 using standard partition. I did this for fault tolerance feature in RAID 1 But, here when 1 hard disk failed the server goes into ...
0
votes
1answer
61 views

Doing RAID 1 on Mac OS X

After doing some research about RAID options and benefits I'm thinking (or shall I say - curious) of doing RAID on my two SSDs. In Disk Utility it allows me to do "Mirrored RAID set" (RAID 1?), ...
0
votes
0answers
21 views

Multiple HDDs hanging constantly

I have an AMD Windows 7 system which has its OS on an SSD, and until previously had a single 4TB HDD as a data drive. I never had an issue with that drive until I installed a second 4TB drive and put ...
0
votes
3answers
131 views

Ubuntu - OK to raid0 and raid1 on same two drives?

I'm building a household Ubuntu 14.04 server and just installed two 3TB drives for the files and media. The box (HP DC7900 SFF) uses Intel Matrix RAID which, according to wikipedia is neither hardware ...
0
votes
0answers
23 views

Unable to access newly created software RAID array in Ubuntu Desktop

please assist me with the following problem. I already have an Ubuntu Desktop 12.04 box into which I have added 2 500GB drives in the hopes of wring them up in a RAID-1 configuration for simple ...
0
votes
0answers
58 views

Windows Software RAID 1 - How can I “Offline” both disks at the same time?

I want to disable both drives in my Mirrored Volume setup so that I can mount them in a virtual machine (for testing, no important data is on the drives right now). Offlining them individually breaks ...
0
votes
1answer
155 views

No extents were found for the plex, when setting up Soft RAID 1 with RAID 5 on Windows Server 2012

I did find a similar question on this, but it did not really answer my question or fix the problem, so i'm starting up a new questions on it. This is my setup now: You can see if i have RAID 5 ...
0
votes
0answers
53 views

Ubuntu RAID1 with HP server

I have a server HP ProLiant ML310e Gen8V2 with 2 disks, and I want to install ubuntu 12.04 with RAID1. However, I have read some posts that say "This model of HP didn't support RAID1 with Ubuntu or ...
0
votes
1answer
52 views

Keep linux software RAID 1 after OS change

Currently I've configured software RAID 1 on ubuntu machine. However I am planning to add SSD drive just for the OS and keep my main 2 HDD for the storage with RAID. The question is, can I put now ...
0
votes
1answer
23 views

Error RAID1 but can't seem to find where the error is?

I'm having trouble figuring out where the problem is. I'm seeing my two drives... I removed a failed drive and installed an empty one. Thought I added it to the raid and it said it was rebuilding. ...
0
votes
0answers
254 views

How can I create a software RAID mirror of the system drive after installing Windows 8.1 Pro 64-bit?

I have a brand new system with UEFI Install of Win 8.1 Pro 64 Bit. The OS is installed on a 1TB WD Drive I also have a second 1TB WD drive that is empty alongside it. They both are GPT. I'm having ...
0
votes
1answer
181 views

Replacing a RAID1 disk with a different model

When I replace a disk in a 2-disk RAID1 array, how do I know if a proposed replacement disk is actually suitable? Just to make the question more concrete, the disk to be replaced is a 1TB Seagate ...
0
votes
1answer
98 views

Recover data from server with “broken disk” Raid1

One of the drives (sdc) on the server hosted on hetzner has gone broken and I cannot mount the drives to backup the data, following is the df, fdisk, mdstat, examine outputs All i want to do is ...
0
votes
0answers
125 views

Re-merging two disk that used to mirror each other

I have had two hard disks that mirrored each other (RAID 1, software based). After I recently plugged them out of the mother board and plugged them back in, this mirrored volume was unavailable. I ...
0
votes
0answers
236 views

RAID1 has not handled disk failure

I have a Dell Vostro running Windows 7 with 2 x 1TB hard drives in a Raid1 array. It uses Intel Rapid Storage Technology (IRST) to manage the Raid1 array. This is how I purchased the machine. Last ...
0
votes
1answer
651 views

Deleting RAID 1 array with OS on it and switching to AHCI mode? Without losing data?

I am trying to break my RAID 1 array (using onboard intel raid controller) that has Windows 8.1 installed on it. I then want to switch my bios to AHCI mode and boot from one of those drives. Is it as ...
0
votes
1answer
35 views

Bootable RAID1 instead of extra SATA drive

Here's the deal as a web developer I am total rookie in the hardware stuff, but since we make more money now and tried to experiment some stuff. I got this Raid1 (4 SAS Drives) and extra 3TB Sata ...
0
votes
1answer
54 views

What is the best way to create RAID 1?

I'm looking for a way to create the RAID 1 array without losing my data on CentOS. Here's my situation: I've got a web server running on CentOS. There is one VG partition with few LV volumes. I bought ...
0
votes
1answer
91 views

P8P67LE Motherboard - SATA MODE RAID; Create RAID 1

As it seems my ASUS P8P67LE motherboard has built-in RAID capability. My OS is previously installed in normal mode and in BIOS setting SATA MODE is set to AHCI (Advance host controller interface) ...
0
votes
2answers
115 views

Multiple disk controller cards and RAID1

I'm creating a btrfs RAID1 array, and I have two SATA3 controllers - one on the motherboard and another in a PCIe slot. For simplicty's sake, let's say I only have two drivers, sda and sdb. Would I ...
0
votes
0answers
90 views

Data loss warning rebuilding RAID1 logical drive

I have a Windows 7 Pro server running RAID1 and from the log, it appears that it 'lost' a drive for a few seconds and now thinks that the RAID1 has failed. I assume it needs rebuilding, which I ...
0
votes
2answers
451 views

RAID1 drive failed; partition missing after reboot

I think I shot myself in the foot here, but let me quickly divulge what's happened: Intel Matrix Storage Manager started reporting that one of the two disks I had in a RAID1 array configuration had ...
0
votes
1answer
360 views

How to limit bandwidth (file sync) to a specific windows file share (smb - raid1 backup device)?

So I decided that I needed a Raid1 backup device for the home. Mostly to backup documents and media. There will be about 3-4 Windows systems in the household that would sync files to this device. I ...
0
votes
1answer
336 views

Repair partition table for disks in a RAID1 array

Here's my problem. I have several arrays. RAID1. I've scanned each drive that's part of an array with gdisk and it reports problems. One array (2 drives) has a damaged GPT partition table and a ...
0
votes
1answer
142 views

Intel RST accidentally selected wrong drive as system drive — how to fix?

Question / TL;DR If Intel RST has marked a drive other than my RAID set as the system drive, how can I get it so that the RAID set is now seen as the system drive, and catch it up to my drive now? ...
0
votes
1answer
217 views

Debian/3ware 9500 - RAID Failure?

I swapped the hard disks from my home server into a new case last night (new mobo/CPU/RAM) and transferred its 3ware 9500 PCI-X SATA RAID card with it. The machine has 4 disks configured in 2 RAID1s - ...
0
votes
0answers
38 views

How to undo accidental RAID initalization operation (recover data)? [duplicate]

Summary of the problem: I have two disks re-configured as RAID 1. instead of copying the data to the empty disk, it deleted the data from the non-empty disk. Here's what happened: 1. In the last ...
0
votes
1answer
389 views

Installing Fedora 19: only shows one SSD of two

I'm trying to install Fedora 19 on two SSDs (Software RAID 1 if possible). These SSDs were used in another computer before. I deleted the MBR record and the partition table with dd if=/dev/zero ...
0
votes
3answers
1k views

Can a secondary SATA drive under Win 7 Pro software RAID 1 mirror be boot-able with no hassle?

Using Windows 7 Professional software RAID 1 (Mirror) of two identical SATA drives is it possible in the event the primary drive fails that the system may boot off the secondary drive without doing ...
0
votes
1answer
402 views

Can't format hard drives under RAID-1

I have a Gigabyte GA-EP45 extreme, which contains a "Intel Matrix RAID controller". On lspci outputs as: RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] I bought two ...
0
votes
1answer
131 views

How can I delete soft/motherboard RAID 1 from a different computer?

I have a drive. It was part of a RAID 1 mirror on a motherboard-based raid controller (nVidia controller on an ASUS A8N-SLI Deluxe), which, if I understand correctly, is considered to be "soft" raid, ...
0
votes
1answer
277 views

RAID 1 with ThinkPad T530

A friend of mine has a T530 (I think he bought it last year) and I checked the spec it seems to support RAID 1 (mirroring). He currently has one hard disk running and is considering RAID 1 and is also ...
0
votes
1answer
512 views

Adjusting mdadm priority on Ubuntu

I have Ubuntu 12.04 running on my new server, and it is setup to run off of one drive, then 2 drives that are mirrored using mdadm. When streaming files or media from it, it is extremely slow. I was ...
0
votes
2answers
1k views

Intel Matrix Storage / Raid 1 / Asus P5Q-Pro

I have configured two 1TB Western Digital Green Hard drive into Raid 1 Array via my motherboard BIOS last month. Everything works fine and all data are copied to array and system works properly. few ...
0
votes
3answers
513 views

Hard Drive Slow down.. where do I start?

I just built my first PC less than a month ago. I have a SSD drive with my Windows Operating System on it, and I have two Western Digital Caviar Black 2TB 3.5" 7200RPM Internal Hard Drives ...
0
votes
2answers
120 views

Can I extend RAID 1 on Debian Squeeze?

I have Debian Squeeze in a RAID 1 on 2 physical 2 TB disks. Is it possible in the future to add two physical disks and extend the RAID 1?
0
votes
1answer
319 views

How to properly change directory structure/mount points for directory?

After several attempts to formalize my problem, I think, I finally managed to do it. What I have: mount -l ... /dev/md123 on / type ext3 ...
0
votes
3answers
257 views

Is it possible to create a RAID 1 array for ubuntu and install xp on a non-RAID part of the drive?

I was wondering if it is possible to setup a hardware RAID 1 array on 2x1TB drives for the installation of Ubuntu 12.04 whilst leaving some space free outside of the RAID array to install Windows XP ...