Ultra low-cost computer the size of a credit card. Also check the Raspberry Pi SE: http://raspberrypi.stackexchange.com/

learn more… | top users | synonyms

0
votes
1answer
12 views

cannot view website from outside LAN

I am trying to host a website using a raspberry pi and nginx. I have everything set up, and can even access my website while directly linked to my lan. I cannot, however, access it outside my ...
1
vote
0answers
24 views

LXDE doesn't start - fonts missing?

So I have my Raspberry Pi (B+), and want to run LXDE on it. Should be installed. So I run startx, and i get a black screen with a dash in the top left corner. Weird. XINIT tells me XTERM isn't ...
1
vote
1answer
31 views

Portforwarding Combine Several Ports

I got a Raspberry Pi at A.A.A.B in my local network and I have set up a DMZ on my router so that any incoming traffic that comes to my router gets redirected to my Raspberry Pi which I can connect via ...
0
votes
0answers
8 views

crypto kernel module not avialable on linux 3.18.11 on Raspberry Pi 2

I'm trying to use dm-crypt on my Raspberry Pi 2 with Raspbian (debian) to open a trueCrypt volume, but i get Required kernel crypto interface not available. Ensure you have algif_skcipher kernel ...
1
vote
1answer
71 views

Symbol Technologies LS2208 USB barcode scanner not working with Raspberry Pi 2

I have a Symbol Technologies LS2208 USB barcode scanner plugged into my brand new Raspberry Pi 2. I’ve installed Raspbian as the OS and everything seems to be working—It is recognized as an HID ...
2
votes
2answers
186 views

Why is Samba SMB slower than HTTP/NFS/FTP transfer on NAS on my LAN?

I want to set up a NAS which I have done most recently with a Raspberry Pi 2 (quad-core ARM Cortex-A7, 1GB RAM, 32GB microSD) running Raspbian “Jessie”: I have a laptop—an HP Pavilion G6—running ...
0
votes
0answers
3 views

Cannot remove extra gampad mappings in retropie

I'm trying out RetroPie for the first time on a Raspberry Pi 2. I ran the retropie controller configuration tool from EmulationStation and it generated a controller file called PCGamepadUSB.cfg. ...
2
votes
2answers
20 views

start process from ssh and be able to close connection

I'm connecting to my RaspberryPi with Raspbian installed via ssh. My problem is that I can't let the RasPi do things (e.g., installing software, performing calculations) while my computer is shut ...
1
vote
0answers
29 views

Use of single board computers in real world [closed]

I have few questions about single board computers. Are there any commercial products/projects which uses single board computers? Eg: Raspberry Pi , Cubieboard Are they capable of running for long ...
1
vote
1answer
46 views

Cannot connect to Raspberry Pi via SSH

I made an image of Raspbian on SD and trying to connect it now via SSH. The problem that PuTTY returns always “connection timeout.” I’m using Windows 8.1, connected to Internet via Wi-Fi. PC connected ...
0
votes
2answers
24 views

Which .bashrc file to edit

On my raspberry pi (running raspbian), I'd like to edit the .bashrc file so that various actions can be performed at every login. However, I have found two .bashrc file on the system: one is located ...
0
votes
0answers
26 views

How secure is it to use a image of an prebuilt Operating System? [closed]

I've bought a Banana Pi (single-board computer) (with ARM-CPU) to learn more about Linux/(L)ubuntu. I read that closed-source or prebuilt Software is problematic in terms of privacy/security. I ...
0
votes
0answers
34 views

rootfs 100% full debian

I have a problem with full rootfs on Debian (on RPi). I noticed I can't start mysql server with error full partition. I tried looking for space hoggers with ncdu. It all appeared suddenly and I have ...
0
votes
0answers
22 views

X-Sendfile ownCloud 404 error

I have a problem with X-Sendfile on Apache on Debian with ownCloud. When I want to download single file I got an error: The requested URL /owncloud/index.php/apps/files/ajax/download.php was not found ...
2
votes
1answer
3k views

Sharing a Windows 7 wifi connection with a Raspberry PI

I have a Windows 7 PC that is using a Wireless network connection that I want to share on the PI. I have a working CAT 5 cable that I am using to connect the Win 7 PC to the PI. I have configured ...
-2
votes
0answers
34 views

I am new to Python programming and playing with Raspberry Pi- Rasbian

The following is stored at /home/pi/ directory: #!/usr/bin/env python #Connect three LEDs at GPIO 7,11, and 13 and blink #Until to Stop with Ctrl-C import RPi.GPIO as GPIO # Make sure RP has lower ...
3
votes
1answer
77 views

Is it proper to route default gateway to the modem instead of the DHCP/DNS server?

My setup is a modem (no DHCP or DNS) connected to a network switch. The network switch is connected to a Raspberry Pi that acts as a DHCP+DNS server using dnsmasq. The thing is, all traffic from the ...
0
votes
0answers
9 views

Show video from Motion on lcd display Raspberry Pi

I use Motion service on my RPi to collect video from webcam in my garden. Also, I heard a lot about lcd for Raspberry. Is there any way to show on lcd connected to computer video from webcam? Thanks ...
0
votes
0answers
11 views

DNSMASQ redirecting LAN user to webserver but this doesn't work on wifi

Iam trying to create wifi captive portal on raspberry pi so i've installed nginix server and DNSMASQ,after using dnsmasq for traffic redirecting it works only on LAN but not on WiFi..? how would i do ...
0
votes
0answers
14 views

How to redirect traffic to a fixed IP address in Fwbuilder

I'm new to fwbuilder and I want to redirect all incoming wifi traffic to my web server. I tried many iptables command but I've failed so I came up to GUI firewall. Can anyone suggest how to do it?
0
votes
0answers
4 views

Running a slideshow on Ubuntu and and nfs

Seen this question and answer. I need to run a slideshow whose images are hosted on an nfs. Would this snippet of code while true ; do for i in * ; do cp "$i" ~/slideshow.jpg ; echo $i ; sleep 5 ; ...
0
votes
0answers
23 views

Starting MySQL database server: mysqldinstall: invalid user `mysql'

i have a problem with mysql on my Raspberry Pi running Linux raspberrypi 3.18.7+ #755 PREEMPT Thu Feb 12 17:14:31 GMT 2015 armv6l GNU/Linux. This is error I have when I run sudo service mysql start ...
0
votes
2answers
40 views

No route between clients until pinged from one of them (and not from another)

3 items of hardware involved: Netgear R7000 router with DD-WRT v24-sp2 (08/15/14) kongac (24865M) - it's dual band. Raspberry Pi model B based print server, with Raspbian (Debian for Raspberry). ...
0
votes
0answers
13 views

Ntfs-3g mounted drives with read-only/no access to certain users

I have a raspberry pi where two ntfs drives (after installing ntfs-3g) are mounted automatically having the following lines in etc/fstab: /dev/sda1 /media/USBHDD1 auto noatime 0 0 /dev/sda2 ...
4
votes
2answers
5k views

How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by ...
0
votes
0answers
33 views

Setting up an OpenVPN connection between my home network and a serve ro the internet

I want ot tunnel all local network traffic oven an OpneVPN connection. I have an ubuntu server configured on the internet (and it works from my laptop) and am now trying to configure the Raspberry to ...
0
votes
1answer
80 views

SSH on Raspberry Pi (OpenELEC) not working

I am not able to use SSH to connect to the Raspberry. Raspberry Pi B+ OpenELEC 5.0.8 (SSH enabled) wired eth0 (recognized during setup) 10.190.135.xxx IP address If I ping the said ...
1
vote
2answers
59 views

Cant extend into Unallocated space

I'm currently messing with my Raspberry Pi, I was going to reinstall the operating system then I realized that only 2.5 gigs was usable on the drive. I thought this wasn't the problem and continued ...
0
votes
1answer
12 views

Auto detach after auto connecting in irssi

I have irssi auto connect to a channel and send a message to auto connect which works. But for some reason the detach command (ctrl-a + d) does not detach the screen anymore. Is there a setting for ...
1
vote
1answer
49 views

How to add a free-wifi hotspot to an existing private network

I'm tinkering with IoT (arduino + wifi shield) and I'm also for an open (read free) internet. Both these things would be helped if I could create a free (no password etc.) wifi hotspot (my IoT ...
1
vote
1answer
41 views

Is there a way to run a specific script with every “halt” and “reboot” command on Linux?

I need to find a way to somehow intercept the halt and reboot commands and execute different actions via shell script before the actual halt and reboot commands are executed. Is that possible without ...
4
votes
3answers
2k views

How to tell which services run at startup on Raspberry Pi? (raspbian)

I have some services that run on boot but I've actually forgotten how I set them up! If I want to change their activity how might I do that? For instance, maybe I want to disable a service from ...
0
votes
2answers
54 views

Traffic redirection with Rasperry Pi router

I use a Rasperry Pi (running raspbian) as a wi-fi router. It redirects traffic from the Ethernet wire (eth0 - wire + ppp0 - L2TP connection, lx2tp used for it) to wlan0 (USB wi-fi dongle, hostapd used ...
0
votes
0answers
8 views

Can't create LVM raid in Pidora

I'm experimenting with Pidora, trying to configure some reasonably redundant storage. [root@bravo ~]# lvcreate -d -v -m1 -L10G -n ${lv_name} ${vg_name} Executing: /usr/sbin/modprobe dm-raid ...
0
votes
1answer
29 views

Using a Raspberry Pi from another network

The idea to be able to connect to my raspberry pi via SSH when I am not a home. How do I do this? Do I just port-forward it? I also want to connect to it from my domain (polardragon.cf) instead of my ...
0
votes
1answer
244 views

Using usbip on raspberry

I have been trying to use usbip on my raspberry for hours now. after apt-get install usbip no module gets created: pi@raspberrypi ~ $ sudo modprobe usbip FATAL: Module usbip not found. ...
0
votes
1answer
4k views

How do I set read/write permissions on a Raspberry Pi set up as a network storage device?

I've followed the ff instructions on how to set up a Raspberry Pi as a simple network storage device: How to Turn a Raspberry Pi into a Low-Power Network Storage Device However I ran into a problem ...
0
votes
0answers
55 views

sftp with sshd special user permissions

I try to set up a sftp server with my raspberry pi. The result should be that there were three users - sftp-readonly, sftp-readwrite and sftp-writeonly - with special access permissions. As the name ...
0
votes
0answers
15 views

Create a VPN tunnel from ethic to wlan0

I have a lan network of which all internet traffic has to be routed through a openVPN tunnel. I use a RPi, and have setup ethic with a DHCP server, and can connect clients. Currently I use a lan0 to ...
0
votes
0answers
32 views

MySQL installed on debian (raspbian), is running in background, but “mysql: command not found”

I have a linux server running at home on a Banana Pi (very similar to a Raspberry Pi) with a few small websites and databases. Specifically; $ cat /etc/*-release PRETTY_NAME="Raspbian GNU/Linux 7 ...
0
votes
0answers
38 views

How can I mount an HFS+ (Time Capsule) volume Raspberry Pi 2?

I would like to mount my Time Capsule (HFS+) where my music is stored on my Raspberry Pi 2. To do this, I’ve tried 2 commands: sudo mount -t hfsplus //10.0.0.4/'Data' /mnt/timeCapsule -o ...
0
votes
1answer
36 views

Hide HTTP Destination with a Raspbery Pi

I wanna realize some kind of WebServer or Proxy on my Raspberry Pi that hides the real http requests from any firewall. Following scenario: computer@school --Request--> myRPi --Request--> ...
0
votes
0answers
52 views

Compile brscan3 on Raspberry Pi (brother scanner)

I am trying to compile brscan3 (Brother software for scanner) from source file on my Raspberry Pi (arm architecture). I tried ./configure but I obtain this error: config.status: creating Makefile ...
0
votes
0answers
22 views

avconv stream dies after 2 hours

I have a live stream running from a Raspberry Pi camera using the following command: avconv -f h264 -r 25 -i fifo.264 -metadata title="Raspberry Pi Camera Module (LIVE)" -f flv ...
0
votes
0answers
27 views

Cups Brother DCP-195C not printing

I am trying to convert my Raspberry Pi to a printing server. I have connected my Brother DCP-195C on the Pi using USB link. I have installed cups (via apt-get). I configured the printer on the CUPS ...
0
votes
0answers
44 views

Raspberry Pi VPN server using PPTPD internet access

I am not quite sure if this is the best website for this question, but I'll give it a shot anyways. I setup a VPN server yesterday on my Pi (running latest Raspbian) using PPTPD. The purpose of this ...
2
votes
1answer
1k views

Forcing Deluge traffic down ppp0 adapter?

Basically i have a PPTP VPN connection on my linux box (Raspberry Pi on Raspian) and I have Deluge installed with the WebUI. The client is fantastic, really love it and the functionality that comes ...
0
votes
0answers
34 views

Adding a Network Location from Win 7 to Raspberry Pi XBMC server (MAP)

I'm trying to map my Windows 7 Desktop to my XBMC raspberry pi server using 'Network Location'. I've successfully achieved this in the past, but I'm having trouble getting it connected. If I let ...
2
votes
1answer
2k views

Automatic script launch after booting on Debian

I try to launch some scripts at boot time on my Raspberry Pi (running Raspbian Wheezy). I have created the file /etc/init.d/datalogger-serveur : #! /bin/sh ### BEGIN INIT INFO # Provides: ...
0
votes
1answer
28 views

Transmission doesn't connect internet after ip address change

After I've changed ip address on raspberry pi I've got problem with torrent client Transmission. It doesn't start download or upload of torrent file. I've updated /etc/network/interfaces, but it ...